Problème WPA
Guillaume Pancak
guillaume at pancak.com
Mer 23 Nov 10:45:27 UTC 2005
Bonjour,
Pour le pilote si c'est une carte WIfi "G" il me semble qu'il faut mettre
"prism54g" au lieu de prism54
<citation de="Paco">
> Bonjour à tous.
>
> J'utilise une Carte Wifi PCMIA à chipset Prism54 (isl3890) qui
> fonctionne très bien en WEP.
>
> Et j'essaie de la faire fonctionner en WPA.
>
> J'ai suivi le wiki :
>
> http://wiki.ubuntu-fr.org/installation/wpa
>
> Et :
>
> https://wiki.ubuntu.com/WPAHowto
>
> Malheureusement.. ça ne marche pas... impossible de me connecter...
>
> Mon Iwconfig :
>
> eth1 NOT READY! ESSID:"beurdin"
> Mode:Managed Channel:0 Access Point: 00:00:00:00:00:00
> Tx-Power=31 dBm Sensitivity=0/200
> Retry min limit:0 RTS thr=0 B Fragment thr=0 B
> Encryption key:off
> Link Quality:0 Signal level:0 Noise level:0
> Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
> Tx excessive retries:0 Invalid misc:0 Missed beacon:0
>
>
> Voilà ce que donne la commande :
>
> # wpa_supplicant -i eth1 -c /etc/wpa_supplicant.conf -D prism54 -d
>
> ----------------------------------------------------------------------
> Initializing interface 'eth1' conf '/etc/wpa_supplicant.conf' driver
> 'prism54'
> Configuration file '/etc/wpa_supplicant.conf' ->
> '/etc/wpa_supplicant.conf'
> Reading configuration file '/etc/wpa_supplicant.conf'
> ctrl_interface='/var/run/wpa_supplicant'
> eapol_version=1
> ap_scan=1
> fast_reauth=1
> Priority group 0
> id=0 ssid='beurdin'
> Initializing interface (2) 'eth1'
> EAPOL: SUPP_PAE entering state DISCONNECTED
> EAPOL: KEY_RX entering state NO_KEY_RECEIVE
> EAPOL: SUPP_BE entering state INITIALIZE
> EAP: EAP entering state DISABLED
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> ioctl[SIOCSIWPMKSA]: Operation not supported
> SIOCGIWRANGE: too old (short) data - assuming WPA is not supported
> Own MAC address: 00:09:5b:e8:a0:4b
> wpa_driver_prism54_set_countermeasures - not yet implemented
> Setting scan request: 0 sec 100000 usec
> Wireless event: cmd=0x8b06 len=8
> RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
> RTM_NEWLINK, IFLA_IFNAME: Interface 'eth1' added
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Wireless event: cmd=0x8c02 len=74
> Custom wireless event: 'Received a beacon from an unkown AP to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=74
> Custom wireless event: 'Received a beacon from an unkown AP to
> 00:03:C9:7B:8A:98 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=74
> Custom wireless event: 'Received a beacon from an unkown AP to
> 00:03:C9:8C:B3:AC (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=74
> Custom wireless event: 'Received a beacon from an unkown AP to
> 00:0F:B5:19:E4:4A (00)'
> Wireless event: cmd=0x8c02 len=76
> Custom wireless event: 'Authenticate request (ex) to 00:07:CB:54:C4:93
> : ACCEPTED (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=76
> Custom wireless event: 'Authenticate request (ex) to 00:07:CB:54:C4:93
> : ACCEPTED (00)'
> Scan timeout - try to get results
> Received 405 bytes of scan results (4 BSSes)
> Scan results: 4
> Selecting BSS from priority group 0
> 0: 00:07:cb:54:c4:93 ssid='beurdin' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
> selected
> Trying to associate with 00:07:cb:54:c4:93 (SSID='beurdin' freq=2447 MHz)
> Cancelling scan request
> WPA: clearing own WPA/RSN IE
> Automatic auth_alg selection: 0x1
> WPA: using IEEE 802.11i/D3.0
> WPA: Selected cipher suites: group 8 pairwise 24 key_mgmt 2
> WPA: set AP WPA IE - hexdump(len=30): dd 1c 00 50 f2 01 01 00 00 50 f2
> 02 02 00 00 50 f2 04 00 50 f2 02 01 00 00 50 f2 02 00 00
> WPA: clearing AP RSN IE
> WPA: using GTK TKIP
> WPA: using PTK CCMP
> WPA: using KEY_MGMT WPA-PSK
> WPA: Set own WPA IE default - hexdump(len=24): dd 16 00 50 f2 01 01 00
> 00 50 f2 02 01 00 00 50 f2 04 01 00 00 50 f2 02
> No keys have been configured - skip key clearing
> State: SCANNING -> ASSOCIATING
> Setting authentication timeout: 5 sec 0 usec
> EAPOL: External notification - EAP success=0
> EAPOL: External notification - EAP fail=0
> EAPOL: External notification - portControl=Auto
> Wireless event: cmd=0x8b04 len=12
> Wireless event: cmd=0x8b1a len=20
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=76
> Custom wireless event: 'Authenticate request (ex) to 00:07:CB:54:C4:93
> : ACCEPTED (00)'
> Wireless event: cmd=0x8b04 len=12
> Wireless event: cmd=0x8b1a len=20
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=67
> Custom wireless event: 'Received a probe from client to
> 00:07:CB:54:C4:93 (00)'
> Wireless event: cmd=0x8c02 len=76
> Custom wireless event: 'Authenticate request (ex) to 00:07:CB:54:C4:93
> : ACCEPTED (00)'
> Authentication with 00:00:00:00:00:00 timed out.
> Added BSSID 00:00:00:00:00:00 into blacklist
> State: ASSOCIATING -> DISCONNECTED
> No keys have been configured - skip key clearing
> EAPOL: External notification - portEnabled=0
> EAPOL: External notification - portValid=0
> Setting scan request: 0 sec 0 usec
> State: DISCONNECTED -> SCANNING
> Starting AP scan (broadcast SSID)
> Wireless event: cmd=0x8c02 len=76
> Custom wireless event: 'Authenticate request (ex) to 00:07:CB:54:C4:93
> : ACCEPTED (00)'
> Scan timeout - try to get results
> Received 481 bytes of scan results (5 BSSes)
> Scan results: 5
> Selecting BSS from priority group 0
> 0: 00:07:cb:54:c4:93 ssid='beurdin' wpa_ie_len=30 rsn_ie_len=0 caps=0x11
> selected
> Trying to associate with 00:07:cb:54:c4:93 (SSID='beurdin' freq=2447 MHz)
> --------------------------------------------------------------------------
> (...)
>
> Merci par avance de votre aide.. je ne sais plus quoi faire ni où
> chercher...
>
> --
> Paco
>
> --
> ubuntu-fr mailing list
> ubuntu-fr at lists.ubuntu.com
> http://lists.ubuntu.com/mailman/listinfo/ubuntu-fr
>
Plus d'informations sur la liste de diffusion ubuntu-fr