Problème de freeze au reboot

KORALEWSKI Dominique dkoralewski at wanadoo.fr
Mar 30 Aou 18:28:35 BST 2005


Hello,

j'ai un amd64 et chipset nvidia

dok at dokpass:~$ lspci
0000:00:00.0 Host bridge: nVidia Corporation: Unknown device 00e1 (rev a1)
0000:00:01.0 ISA bridge: nVidia Corporation: Unknown device 00e0 (rev a2)
0000:00:01.1 SMBus: nVidia Corporation: Unknown device 00e4 (rev a1)
0000:00:02.0 USB Controller: nVidia Corporation: Unknown device 00e7 
(rev a1)
0000:00:02.1 USB Controller: nVidia Corporation: Unknown device 00e7 
(rev a1)
0000:00:02.2 USB Controller: nVidia Corporation: Unknown device 00e8 
(rev a2)
0000:00:05.0 Bridge: nVidia Corporation: Unknown device 00df (rev a2)
0000:00:06.0 Multimedia audio controller: nVidia Corporation: Unknown 
device 00ea (rev a1)
0000:00:08.0 IDE interface: nVidia Corporation: Unknown device 00e5 (rev a2)
0000:00:0a.0 IDE interface: nVidia Corporation: Unknown device 00e3 (rev a2)
0000:00:0b.0 PCI bridge: nVidia Corporation: Unknown device 00e2 (rev a2)
0000:00:0e.0 PCI bridge: nVidia Corporation: Unknown device 00ed (rev a2)
0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
0000:01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce 
FX 5200] (rev a1)
0000:02:0b.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host 
Controller (rev 80)
0000:02:0c.0 RAID bus controller: Silicon Image, Inc. (formerly CMD 
Technology Inc) SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02)


dok at dokpass:~$ sudo hdparm -d /dev/hdc

/dev/hdc:
 using_dma    =  0 (off)
dok at dokpass:~$ sudo hdparm -I /dev/hdc

/dev/hdc:

ATAPI CD-ROM, with removable media
        Model Number:       LITE-ON DVD SOHD-16P9S
        Serial Number:
        Firmware Revision:  FS07
Standards:
        Used: ATAPI for CD-ROMs, SFF-8020i, r2.5
        Supported: CD-ROM ATAPI-2
Configuration:
        DRQ response: 50us.
        Packet size: 12 bytes
Capabilities:
        LBA, IORDY(cannot be disabled)
        DMA: mdma0 mdma1 mdma2 udma0 udma1 *udma2
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=227ns  IORDY flow control=120ns
dok at dokpass:~$ sudo hdparm -d1 /dev/hdc

/dev/hdc:
 setting using_dma to 1 (on)
 HDIO_SET_DMA failed: Operation not permitted
 using_dma    =  0 (off)


j'ai appliqué ce qui est recommandé dans le wiki d'optimisation des 
périphériques ide

mis amd74xx dans le /etc/modules an premier

mais au reboot, ça freeze au niveau de Loading modules

Je dois passer par le LiveCD pour commenter mon rajout pour rebooter.

Un conseil pour pouvoir activer le dma sur mon lecteur ?

Merci d'avance,

DoK





Plus d'informations sur la liste de diffusion ubuntu-fr