Fwd: SO no se instala, no puedo particionar el disco.

Mauricio J. Adonis C. mike.alfa.2007 en gmail.com
Sab Dic 21 18:00:36 UTC 2013


El 20/12/13 16:59, Ever Medina escribió:
> Hola a todos, estoy con problemas para instalar LinuxMint13, no puedo
> particionar el disco. Probé con Ubuntu12.04 y con el LiveCD de GParted
> pero el mensaje siempre es el mismo "Input/output error during write
> on /dev/sda" y "Error fsyncing/closing /dev/sda: Input/output error" y
> no se a que se debe.
> Tenia instalado Wxp, la maquina estaba frizada pero (para no perder la
> costumbre) fallo y el SO ya no funciono mas, hice un Backup de los
> archivos personales, elimine todas las particiones pero cuando quiero
> instalar el SO nuevo no puedo crear las particiones y formatear.
> Probé particionar antes de iniciar la instalación y tampoco puedo
> hacerlo, verifique errores en el disco y me da todo OK.
> El problema comenzó porque se acabo la pila de la BIOS y creo que se
> desconfiguró. No tengo idea como configurar la Bios para poder
> proseguir con la instalación. Agradezco que me tiren un cable, la
> computadora es de mi vieja y me costo convencerla de pasarse a nuestro
> equipo :), pero esta piedra en el camino me saco de lugar. Y disculpen
> que consulte en la lista de Ubuntu, para terminar de instalar LM, soy
> Ubunturero pero a mi vieja unity no le convence y a LM lo ve mas
> amigable (por el escritorio). Desde ya gracias.
>
> Ever Medina
>
> esto es lo que me devuelve la terminal con "sudo dmidecode -t 0"
>
> # dmidecode 2.11
> SMBIOS 2.5 present.
>
> Handle 0x0000, DMI type 0, 24 bytes
> BIOS Information
>          Vendor: MS-7309
>          Version: V1.11
>          Release Date: 04/03/2008
>          Address: 0xF0000
>          Runtime Size: 64 kB
>          ROM Size: 512 kB
>          Characteristics:
>                  ISA is supported
>                  PCI is supported
>                  PNP is supported
>                  APM is supported
>                  BIOS is upgradeable
>                  BIOS shadowing is allowed
>                  ESCD support is available
>                  Boot from CD is supported
>                  Selectable boot is supported
>                  BIOS ROM is socketed
>                  EDD is supported
>                  5.25"/1.2 MB floppy services are supported (int 13h)
>                  3.5"/720 kB floppy services are supported (int 13h)
>                  3.5"/2.88 MB floppy services are supported (int 13h)
>                  Print screen service is supported (int 5h)
>                  8042 keyboard services are supported (int 9h)
>                  Serial services are supported (int 14h)
>                  Printer services are supported (int 17h)
>                  CGA/mono video services are supported (int 10h)
>                  ACPI is supported
>                  USB legacy is supported
>                  LS-120 boot is supported
>                  ATAPI Zip drive boot is supported
>                  BIOS boot specification is supported
>                  Targeted content distribution is supported
>          BIOS Revision: 8.14
>
> esto es lo que me devuelve la terminal con "sudo lshw | less"
>
> mint
>      description: Desktop Computer
>      version: 1.0
>      width: 32 bits
>      capabilities: smbios-2.5 dmi-2.5 smp-1.4 smp
>      configuration: chassis=desktop cpus=1 family=To Be Filled By
> O.E.M. sku=To Be Filled By O.E.M.
> uuid=00000000-0000-0000-0000-001D92E68570
>    *-core
>         description: Motherboard
>         product: MS-7309
>         vendor: MSI
>         physical id: 0
>         version: 1.0
>         serial: To be filled by O.E.M.
>         slot: To Be Filled By O.E.M.
>       *-firmware
>            description: BIOS
>            vendor: MS-7309
>            physical id: 0
>            version: V1.11
>            date: 04/03/2008
>            size: 64KiB
>            capacity: 448KiB
>            capabilities: isa pci pnp apm upgrade shadowing escd cdboot
> bootselect socketedrom edd int13floppy1200 int13floppy720
> int13floppy2880 int5printscreen int9keyboard int14serial int17printer
> int10video acpi usb ls120boot zipboot biosbootspecification
>       *-cpu
>            description: CPU
>            product: AMD Sempron(tm) Processor LE-1150
>            vendor: Hynix Semiconductor (Hyundai Electronics)
>            physical id: 3
>            bus info: cpu en 0
>            version: 15.15.1
>            serial: To Be Filled By O.E.M.
>            slot: CPU 1
>            size: 2019MHz
>            width: 64 bits
>            clock: 200MHz
>            capabilities: x86-64 boot fpu fpu_exception wp vme de pse
> tsc msr pae mce cx8 apic mtrr pge mca cmov pat pse36 clflush mmx fxsr
> sse sse2 syscall nx mmxext fxsr_opt rdtscp 3dnowext 3dnow up
> extd_apicid pni cx16 lahf_lm extapic cr8_legacy 3dnowprefetch
>            configuration: cores=1 enabledcores=1
>          *-cache:0
>               description: L1 cache
>               physical id: 5
>               slot: L1-Cache
>               size: 128KiB
>               capacity: 128KiB
>               capabilities: pipeline-burst internal varies data
>          *-cache:1
>               description: L2 cache
>               physical id: 6
>               slot: L2-Cache
>               size: 256KiB
>               capacity: 256KiB
>               capabilities: pipeline-burst internal varies unified
>       *-memory:0
>            description: System Memory
>            physical id: 2a
>            slot: System board or motherboard
>            size: 1GiB
>          *-bank:0
>               description: DIMM [empty]
>               product: PartNum0
>               vendor: Manufacturer0
>               physical id: 0
>               serial: SerNum0
>               slot: DIMM0
>          *-bank:1
>               description: DIMM DDR2 Synchronous 333 MHz (3.0 ns)
>               product: PartNum1
>               vendor: Manufacturer1
>               physical id: 1
>               serial: SerNum1
>               slot: DIMM1
>               size: 1GiB
>               width: 64 bits
>               clock: 333MHz (3.0ns)
>       *-memory:1 UNCLAIMED
>            description: RAM memory
>            product: MCP61 Memory Controller
>            vendor: NVIDIA Corporation
>            physical id: 4
>            bus info: pci en 0000:00:00.0
>            version: a1
>            width: 32 bits
>            clock: 66MHz (15.2ns)
>            capabilities: ht bus_master cap_list
>            configuration: latency=0
>       *-isa
>            description: ISA bridge
>            product: MCP61 LPC Bridge
>            vendor: NVIDIA Corporation
>            physical id: 1
>            bus info: pci en 0000:00:01.0
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: isa bus_master
>            configuration: latency=0
>            resources: ioport:4f00(size=256)
>       *-serial
>            description: SMBus
>            product: MCP61 SMBus
>            vendor: NVIDIA Corporation
>            physical id: 1.1
>            bus info: pci en 0000:00:01.1
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: pm cap_list
>            configuration: driver=nForce2_smbus latency=0
>            resources: irq:11 ioport:ec00(size=64) ioport:5000(size=64)
> ioport:6000(size=64)
>       *-memory:2 UNCLAIMED
>            description: RAM memory
>            product: MCP61 Memory Controller
>            vendor: NVIDIA Corporation
>            physical id: 1.2
>            bus info: pci en 0000:00:01.2
>            version: a2
>            width: 32 bits
>            clock: 66MHz (15.2ns)
>            configuration: latency=0
>       *-usb:0
>            description: USB controller
>            product: MCP61 USB 1.1 Controller
>            vendor: NVIDIA Corporation
>            physical id: 2
>            bus info: pci en 0000:00:02.0
>            version: a3
>            width: 32 bits
>            clock: 66MHz
>            capabilities: pm ohci bus_master cap_list
>            configuration: driver=ohci_hcd latency=0 maxlatency=1 mingnt=3
>            resources: irq:23 memory:febfb000-febfbfff
>       *-usb:1
>            description: USB controller
>            product: MCP61 USB 2.0 Controller
>            vendor: NVIDIA Corporation
>            physical id: 2.1
>            bus info: pci en 0000:00:02.1
>            version: a3
>            width: 32 bits
>            clock: 66MHz
>            capabilities: debug pm ehci bus_master cap_list
>            configuration: driver=ehci_hcd latency=0 maxlatency=1 mingnt=3
>            resources: irq:22 memory:febfac00-febfacff
>       *-pci:0
>            description: PCI bridge
>            product: MCP61 PCI bridge
>            vendor: NVIDIA Corporation
>            physical id: 100
>            bus info: pci en 0000:00:04.0
>            version: a1
>            width: 32 bits
>            clock: 66MHz
>            capabilities: pci ht subtractive_decode bus_master cap_list
>       *-multimedia
>            description: Audio device
>            product: MCP61 High Definition Audio
>            vendor: NVIDIA Corporation
>            physical id: 5
>            bus info: pci en 0000:00:05.0
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: pm msi ht bus_master cap_list
>            configuration: driver=snd_hda_intel latency=0 maxlatency=5 mingnt=2
>            resources: irq:21 memory:febf4000-febf7fff
>       *-ide:0
>            description: IDE interface
>            product: MCP61 IDE
>            vendor: NVIDIA Corporation
>            physical id: 6
>            bus info: pci en 0000:00:06.0
>            logical name: scsi1
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: ide pm bus_master cap_list emulated
>            configuration: driver=pata_amd latency=0 maxlatency=1 mingnt=3
>            resources: irq:0 ioport:1f0(size=8) ioport:3f6
> ioport:170(size=8) ioport:376 ioport:ffa0(size=16)
>          *-cdrom
>               description: DVD-RAM writer
>               product: DVD-RAM GH22NP20
>               vendor: HL-DT-ST
>               physical id: 0.1.0
>               bus info: scsi en 1:0.1.0
>               logical name: /dev/cdrom
>               logical name: /dev/cdrw
>               logical name: /dev/dvd
>               logical name: /dev/dvdrw
>               logical name: /dev/sr0
>               version: 1.00
>               serial: [
>               capabilities: removable audio cd-r cd-rw dvd dvd-r dvd-ram
>               configuration: ansiversion=5 status=nodisc
>       *-bridge
>            description: Ethernet interface
>            product: MCP61 Ethernet
>            vendor: NVIDIA Corporation
>            physical id: 7
>            bus info: pci en 0000:00:07.0
>            logical name: eth0
>            version: a2
>            serial: 00:1d:92:e6:85:70
>            size: 100000000
>            capacity: 100000000
>            width: 32 bits
>            clock: 66MHz
>            capabilities: bridge pm msi ht bus_master cap_list ethernet
> physical mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation
>            configuration: autonegotiation=on broadcast=yes
> driver=forcedeth driverversion=0.64 duplex=full ip=192.168.1.100
> latency=0 link=yes maxlatency=20 mingnt=1 multicast=yes port=MII
> speed=100Mbit/s
>            resources: irq:43 memory:febf9000-febf9fff ioport:e480(size=8)
>       *-ide:1
>            description: IDE interface
>            product: MCP61 SATA Controller
>            vendor: NVIDIA Corporation
>            physical id: 8
>            bus info: pci en 0000:00:08.0
>            logical name: scsi3
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: ide pm msi ht bus_master cap_list emulated
>            configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
>            resources: irq:21 ioport:e400(size=8) ioport:e080(size=4)
> ioport:e000(size=8) ioport:dc00(size=4) ioport:d880(size=16)
> memory:febf8000-febf8fff
>          *-disk
>               description: ATA Disk
>               product: WDC WD1600AABS-0
>               vendor: Western Digital
>               physical id: 0.0.0
>               bus info: scsi en 3:0.0.0
>               logical name: /dev/sda
>               version: 05.0
>               serial: WD-WCAP9A349014
>               size: 149GiB (160GB)
>               configuration: ansiversion=5 signature=2bd2c32a
>       *-ide:2
>            description: IDE interface
>            product: MCP61 SATA Controller
>            vendor: NVIDIA Corporation
>            physical id: 8.1
>            bus info: pci en 0000:00:08.1
>            version: a2
>            width: 32 bits
>            clock: 66MHz
>            capabilities: ide pm msi ht bus_master cap_list
>            configuration: driver=sata_nv latency=0 maxlatency=1 mingnt=3
>            resources: irq:20 ioport:d800(size=8) ioport:d480(size=4)
> ioport:d400(size=8) ioport:d080(size=4) ioport:d000(size=16)
> memory:febef000-febeffff
>       *-pci:1
>            description: PCI bridge
>            product: MCP61 PCI Express bridge
>            vendor: NVIDIA Corporation
>            physical id: 9
>            bus info: pci en 0000:00:09.0
>            version: a2
>            width: 32 bits
>            clock: 33MHz
>            capabilities: pci pm msi ht pciexpress normal_decode
> bus_master cap_list
>            configuration: driver=pcieport
>            resources: irq:40
>       *-pci:2
>            description: PCI bridge
>            product: MCP61 PCI Express bridge
>            vendor: NVIDIA Corporation
>            physical id: b
>            bus info: pci en 0000:00:0b.0
>            version: a2
>            width: 32 bits
>            clock: 33MHz
>            capabilities: pci pm msi ht pciexpress normal_decode
> bus_master cap_list
>            configuration: driver=pcieport
>            resources: irq:41
>       *-pci:3
>            description: PCI bridge
>            product: MCP61 PCI Express bridge
>            vendor: NVIDIA Corporation
>            physical id: c
>            bus info: pci en 0000:00:0c.0
>            version: a2
>            width: 32 bits
>            clock: 33MHz
>            capabilities: pci pm msi ht pciexpress normal_decode
> bus_master cap_list
>            configuration: driver=pcieport
>            resources: irq:42
>       *-display
>            description: VGA compatible controller
>            product: C61 [GeForce 6150SE nForce 430]
>            vendor: NVIDIA Corporation
>            physical id: d
>            bus info: pci en 0000:00:0d.0
>            version: a2
>            width: 64 bits
>            clock: 66MHz
>            capabilities: pm msi vga_controller bus_master cap_list rom
>            configuration: driver=nouveau latency=0
>            resources: irq:22 memory:fd000000-fdffffff
> memory:d0000000-dfffffff memory:fc000000-fcffffff
> memory:febc0000-febdffff
>       *-pci:4
>            description: Host bridge
>            product: K8 [Athlon64/Opteron] HyperTransport Technology Configuration
>            vendor: Hynix Semiconductor (Hyundai Electronics)
>            physical id: 101
>            bus info: pci en 0000:00:18.0
>            version: 00
>            width: 32 bits
>            clock: 33MHz
>       *-pci:5
>            description: Host bridge
>            product: K8 [Athlon64/Opteron] Address Map
>            vendor: Hynix Semiconductor (Hyundai Electronics)
>            physical id: 102
>            bus info: pci en 0000:00:18.1
>            version: 00
>            width: 32 bits
>            clock: 33MHz
>       *-pci:6
>            description: Host bridge
>            product: K8 [Athlon64/Opteron] DRAM Controller
>            vendor: Hynix Semiconductor (Hyundai Electronics)
>            physical id: 103
>            bus info: pci en 0000:00:18.2
>            version: 00
>            width: 32 bits
>            clock: 33MHz
>       *-pci:7
>            description: Host bridge
>            product: K8 [Athlon64/Opteron] Miscellaneous Control
>            vendor: Hynix Semiconductor (Hyundai Electronics)
>            physical id: 104
>            bus info: pci en 0000:00:18.3
>            version: 00
>            width: 32 bits
>            clock: 33MHz
>            configuration: driver=k8temp
>            resources: irq:0
>       *-scsi
>            physical id: a
>            bus info: usb en 1:5
>            logical name: scsi0
>            capabilities: emulated scsi-host
>            configuration: driver=usb-storage
>          *-disk
>               description: SCSI Disk
>               physical id: 0.0.0
>               bus info: scsi en 0:0.0.0
>               logical name: /dev/sdb
>               size: 1947MiB (2041MB)
>               capabilities: partitioned partitioned:dos
>               configuration: signature=dd12cc73
>             *-volume
>                  description: Windows FAT volume
>                  vendor: SYSLINUX
>                  physical id: 1
>                  bus info: scsi en 0:0.0.0,1
>                  logical name: /dev/sdb1
>                  logical name: /cdrom
>                  version: FAT32
>                  serial: 4788-c6e8
>                  size: 1946MiB
>                  capacity: 1946MiB
>                  capabilities: primary bootable fat initialized
>                  configuration: FATs=2 filesystem=fat label=eim
> mount.fstype=vfat
> mount.options=ro,noatime,fmask=0022,dmask=0022,codepage=cp437,iocharset=iso8859-1,shortname=mixed,errors=remount-ro
> state=mounted
>
Hola.
Utiliza una sesión Live (en Ubuntu por ejemplo) para analizar el estado 
del disco duro, con la «Utilidad de discos» puedes analizar los datos 
S.M.A.R.T. (previamente debe estar habilitado en la BIOS), comprueba que 
esté todo correcto. Pudiera ser un fallo del disco.

Saludos,
Mauricio J. Adonis C.



More information about the ubuntu-es mailing list