No puedo entrar a internet

[Juanjo]

El jue, 30-09-2010 a las 14:01 -0500, Aradenatorix Veckhom Vacelaevus
escribió:

> Hola:
> 
> 
> 
> Ya lei el link http://www.ubuntu-es.org/node/79260#comment-218184 y
> traté de seguir las instrucciones ahi dadas, y obtengo esto:
> 
> 
> aradnix en cibeles:~$ sudo lspci -nn
> [sudo] password for aradnix: 
> 00:00.0 Host bridge [0600]: Advanced Micro Devices [AMD] RS780 Host
> Bridge [1022:9600]
> 00:01.0 PCI bridge [0604]: Toshiba America Info Systems Device
> [1179:9602]
> 00:05.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
> PCI bridge (PCIE port 1) [1022:9605]
> 00:06.0 PCI bridge [0604]: Advanced Micro Devices [AMD] RS780 PCI to
> PCI bridge (PCIE port 2) [1022:9606]
> 00:11.0 SATA controller [0106]: ATI Technologies Inc SB700/SB800 SATA
> Controller [AHCI mode] [1002:4391]
> 00:12.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> OHCI0 Controller [1002:4397]
> 00:12.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398]
> 00:12.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> EHCI Controller [1002:4396]
> 00:13.0 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> OHCI0 Controller [1002:4397]
> 00:13.1 USB Controller [0c03]: ATI Technologies Inc SB700 USB OHCI1
> Controller [1002:4398]
> 00:13.2 USB Controller [0c03]: ATI Technologies Inc SB700/SB800 USB
> EHCI Controller [1002:4396]
> 00:14.0 SMBus [0c05]: ATI Technologies Inc SBx00 SMBus Controller
> [1002:4385] (rev 3c)
> 00:14.2 Audio device [0403]: ATI Technologies Inc SBx00 Azalia (Intel
> HDA) [1002:4383]
> 00:14.3 ISA bridge [0601]: ATI Technologies Inc SB700/SB800 LPC host
> controller [1002:439d]
> 00:14.4 PCI bridge [0604]: ATI Technologies Inc SBx00 PCI to PCI
> Bridge [1002:4384]
> 00:18.0 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] HyperTransport Technology Configuration [1022:1100]
> 00:18.1 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Address Map [1022:1101]
> 00:18.2 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] DRAM Controller [1022:1102]
> 00:18.3 Host bridge [0600]: Advanced Micro Devices [AMD] K8
> [Athlon64/Opteron] Miscellaneous Control [1022:1103]
> 01:05.0 VGA compatible controller [0300]: ATI Technologies Inc
> RS780M/RS780MN [Radeon HD 3200 Graphics] [1002:9612]
> 01:05.1 Audio device [0403]: ATI Technologies Inc RS780 Azalia
> controller [1002:960f]
> 08:00.0 Ethernet controller [0200]: Atheros Communications Atheros
> AR8132 / L1c Gigabit Ethernet Adapter [1969:1062] (rev c0)
> 09:00.0 Network controller [0280]: Realtek Semiconductor Co., Ltd.
> RTL8187SE Wireless LAN Controller [10ec:8199] (rev 22)
> aradnix en cibeles:~$ sudo modprobe -c | egrep '1969.*1062'
> WARNING: All config files need .conf: /etc/modprobe.d/gedit, it will
> be ignored in a future release.
> alias pci:v00001969d00001062sv*sd*bc*sc*i* atl1c
> aradnix en cibeles:~$ sudo lsmod | grep atlic
> aradnix en cibeles:~$ sudo modprobe atlic
> WARNING: All config files need .conf: /etc/modprobe.d/gedit, it will
> be ignored in a future release.
> FATAL: Module atlic not found.
> aradnix en cibeles:~$ sudo dmesg | grep '08:00.0'
> [    0.193205] pci 0000:08:00.0: reg 10 64bit mmio:
> [0xf0400000-0xf043ffff]
> [    0.193214] pci 0000:08:00.0: reg 18 io port: [0xc000-0xc07f]
> [    0.193276] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot
> D3cold
> [    0.193282] pci 0000:08:00.0: PME# disabled
> [    0.201979] pci 0000:08:00.0: BAR 0: no parent found for of device
> [0xf0400000-0xf043ffff]
> [    0.201982] pci 0000:08:00.0: BAR 0: can't allocate resource
> [    0.201986] pci 0000:08:00.0: BAR 2: no parent found for of device
> [0xc000-0xc07f]
> [    0.201989] pci 0000:08:00.0: BAR 2: can't allocate resource
> [    0.209653] pnp 00:08: io resource (0x22-0x23) overlaps
> 0000:08:00.0 BAR 2 (0x0-0x7f), disabling
> [    0.209658] pnp 00:08: io resource (0x2e-0x2f) overlaps
> 0000:08:00.0 BAR 2 (0x0-0x7f), disabling
> [    0.209663] pnp 00:08: io resource (0x68-0x68) overlaps
> 0000:08:00.0 BAR 2 (0x0-0x7f), disabling
> [    0.209668] pnp 00:08: io resource (0x6c-0x6c) overlaps
> 0000:08:00.0 BAR 2 (0x0-0x7f), disabling
> [    0.209673] pnp 00:08: io resource (0x72-0x73) overlaps
> 0000:08:00.0 BAR 2 (0x0-0x7f), disabling
> [   17.297442] atl1c 0000:08:00.0: PCI INT A -> GSI 17 (level, low) ->
> IRQ 17
> [   17.297455] atl1c 0000:08:00.0: setting latency timer to 64
> [   17.445134] atl1c 0000:08:00.0: version 1.0.0.1-NAPI
> aradnix en cibeles:~$ 
> 
> 
> Hay un error que me marca al hacer el sudo modprobe y acabo de ver
> que después yo la regué, bueno al rato vuelvo
> a intentarlo correctamente, porque eso de tener que hacerlo, guardar
> el archivo, pasarlo por usb y postearlo en otra compu es algo
> engorroso.
> 
> 
> Saludos:
> Aradnix

Hola, tienes un error en el comando $ sudo modprobe atlic tiene que ser
$ sudo modprobe atl1c en lugar de la i latina es un uno.

Juanjo
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-es/attachments/20100930/4e6a78c9/attachment-0001.htm