ACPI: Mensaje de Error
Nach0
guidoignacio en gmail.com
Dom Jul 5 18:50:12 BST 2009
On Sat, Jul 4, 2009 at 6:33 PM, Nach0 <guidoignacio en gmail.com> wrote:
> Ubuntu 9.04 - kernel 2.6.28-11 y 13 - Dell Studio 15 (1555)
> Al iniciar (puse noquiet en el grub para que me muestre los msg del kernel)
> veo una linea que me llama la atencion es la siuguiente:
>
> *ACPI: EC: input buffer is not empty, aborting transaction
> *
>
> E aquí el comando *dmesg | grep ACPI
> [ 0.000000] BIOS-e820: 000000007fd63000 - 000000007fd9f000 (ACPI NVS)
> [ 0.000000] BIOS-e820: 000000007fde4000 - 000000007fdff000 (ACPI data)
> [ 0.000000] modified: 000000007fd63000 - 000000007fd9f000 (ACPI NVS)
> [ 0.000000] modified: 000000007fde4000 - 000000007fdff000 (ACPI data)
> [ 0.000000] ACPI: RSDP 000F7900, 0024 (r2 PTLTD )
> [ 0.000000] ACPI: XSDT 7FDF7B7D, 0074 (r1 DELL M09 6040000
> LTP 0)
> [ 0.000000] ACPI: FACP 7FDE8000, 00F4 (r3 INTEL CRESTLNE 6040000
> ALAN 1)
> [ 0.000000] ACPI: DSDT 7FDE9000, 6F95 (r2 Intel CANTIGA 6040000 INTL
> 20061109)
> [ 0.000000] ACPI: FACS 7FD9EFC0, 0040
> [ 0.000000] ACPI: HPET 7FDFED16, 0038 (r1 INTEL CRESTLNE 6040000
> LOHR 5A)
> [ 0.000000] ACPI: MCFG 7FDFED4E, 003C (r1 INTEL CRESTLNE 6040000
> LOHR 5A)
> [ 0.000000] ACPI: APIC 7FDFED8A, 0068 (r1 PTLTD APIC 6040000
> LTP 0)
> [ 0.000000] ACPI: BOOT 7FDFEDF2, 0028 (r1 PTLTD $SBFTBL$ 6040000
> LTP 1)
> [ 0.000000] ACPI: SLIC 7FDFEE1A, 0176 (r1 DELL M09 6040000
> LTP 0)
> [ 0.000000] ACPI: OSFR 7FDFEF90, 0070 (r1 DELL DELL 6040000
> ASL 61)
> [ 0.000000] ACPI: SSDT 7FDE7000, 0655 (r1 PmRef CpuPm 3000 INTL
> 20050624)
> [ 0.000000] ACPI: SSDT 7FDE6000, 0259 (r1 PmRef Cpu0Tst 3000 INTL
> 20050624)
> [ 0.000000] ACPI: SSDT 7FDE5000, 020F (r1 PmRef ApTst 3000 INTL
> 20050624)
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: PM-Timer IO Port: 0x408
> [ 0.000000] ACPI: Local APIC address 0xfee00000
> [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
> [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
> [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
> [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
> [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
> [ 0.000000] ACPI: IRQ0 used by override.
> [ 0.000000] ACPI: IRQ2 used by override.
> [ 0.000000] ACPI: IRQ9 used by override.
> [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
> [ 0.000000] Using ACPI (MADT) for SMP configuration information
> [ 0.004000] ACPI: Core revision 20080926
> [ 0.005085] ACPI: Checking initramfs for custom DSDT
> [ 0.476263] ACPI: bus type pci registered
> [ 0.493542] ACPI: EC: Look up EC in DSDT
> [ 0.498453] ACPI: BIOS _OSI(Linux) query ignored
> [ 0.503288] ACPI: Interpreter enabled
> [ 0.503288] ACPI: (supports S0 S3 S4 S5)
> [ 0.503288] ACPI: Using IOAPIC for interrupt routing
> [ 0.511962] ACPI: EC: non-query interrupt received, switching to
> interrupt mode
> [ 0.512290] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data =
> 0x62
> [ 0.512292] ACPI: EC: driver started in interrupt mode
> [ 0.512502] ACPI: No dock devices found.
> [ 0.512581] ACPI: PCI Root Bridge [PCI0] (0000:00)
> [ 0.517359] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> [ 0.517601] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
> [ 0.517729] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
> [ 0.517873] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
> [ 0.518000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
> [ 0.518127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
> [ 0.518249] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
> [ 0.531860] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14
> 15)
> [ 0.531988] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14
> 15) *10
> [ 0.532119] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 *10 12 14
> 15)
> [ 0.532244] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14
> 15) *10
> [ 0.532369] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14
> 15) *0, disabled.
> [ 0.532493] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14
> 15)
> [ 0.532618] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14
> 15) *11
> [ 0.532745] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 *7 11 12 14
> 15)
> [ 0.533017] ACPI: WMI: Mapper loaded
> [ 0.533048] PCI: Using ACPI for IRQ routing
> [ 0.561007] pnp: PnP ACPI init
> [ 0.561017] ACPI: bus type pnp registered
> [ 0.563488] pnp: PnP ACPI: found 9 devices
> [ 0.563490] ACPI: ACPI bus type pnp unregistered
> [ 1.212010] ACPI: EC: input buffer is not empty, aborting transaction
> [ 1.416078] ACPI: AC Adapter [ADP1] (on-line)
> [ 1.416763] ACPI: Battery Slot [BAT0] (battery absent)
> [ 1.416830] ACPI: Power Button (FF) [PWRF]
> [ 1.416880] ACPI: Power Button (CM) [PWRB]
> [ 1.416917] ACPI: Sleep Button (CM) [SLPB]
> [ 1.417634] ACPI: Lid Switch [LID0]
> [ 1.418380] ACPI: SSDT 7FD1ACA0, 0223 (r1 PmRef Cpu0Ist 3000 INTL
> 20050624)
> [ 1.418852] ACPI: SSDT 7FD19620, 0575 (r1 PmRef Cpu0Cst 3001 INTL
> 20050624)
> [ 1.421236] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.421257] processor ACPI_CPU:00: registered as cooling_device0
> [ 1.421260] ACPI: Processor [CPU0] (supports 8 throttling states)
> [ 1.425233] ACPI: SSDT 7FD1AA20, 01CF (r1 PmRef ApIst 3000 INTL
> 20050624)
> [ 1.425644] ACPI: SSDT 7FD1AF20, 008D (r1 PmRef ApCst 3000 INTL
> 20050624)
> [ 1.430811] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
> [ 1.430827] processor ACPI_CPU:01: registered as cooling_device1
> [ 1.430830] ACPI: Processor [CPU1] (supports 8 throttling states)
> [ 1.436598] ACPI: Thermal Zone [TZ00] (53 C)
> [ 1.439112] ACPI: Thermal Zone [TZ01] (51 C)
> [ 1.441378] ACPI: Thermal Zone [TZ02] (68 C)
> [ 8.264251] ACPI: Video Device [M86] (multi-head: yes rom: no post:
> no)*
>
>
> Puede estar relacionado al problema de suspensión/hibernación que tengo?
> (el problema es que tengo que suspende/hiberna pero al volver se escucha que
> arranca todo pero menos la pantalla).
>
> Alguien alguna idea?
>
> GraciaS!
>
> Nach0
>
>
>
> ---
> Este mensaje no contiene virus, porque ha sido creado con Linux, utilizando
> Software Libre y auditable.
>
> This message doesn't contain viruses, because it has been created with
> Linux, using auditable Free Software.
>
Agrego más info, no encontré nada concreto en la red:
sudo /etc/acpi/resume.sh
uso: chvt N
* Setting up ALSA... [
OK ]
FATAL: Module button not found.
FATAL: Module button not found.
FATAL: Module fan not found.
FATAL: Module thermal not found.
FATAL: Module fan not found.
FATAL: Module thermal not found.
FATAL: Module acpi_sbs not found.
FATAL: Module ac not found.
FATAL: Module ac not found.
FATAL: Module battery not found.
FATAL: Module battery not found.
FATAL: Module acpi_sbs not found.
No tengo esos modulos aparentemente, probe cargarlos con modprobe pero nada.
Alguien tiene una idea?
Gracias
Nach0
---
Este mensaje no contiene virus, porque ha sido creado con Linux, utilizando
Software Libre y auditable.
This message doesn't contain viruses, because it has been created with
Linux, using auditable Free Software.
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-es/attachments/20090705/4c73d2ed/attachment.htm
Más información sobre la lista de distribución ubuntu-es