problema menu.lst

Dom Feb 19 13:33:31 GMT 2006

hola!

 pongo el fichero inicio.txt obtenido mediante dmesg.

 espero que puedan ayudarme, gracias!

//*******************************************

8.24 BogoMIPS (lpj=2949120)
[4294670.604000] Security Framework v1.0.0 initialized
[4294670.604000] SELinux:  Disabled at boot.
[4294670.604000] Mount-cache hash table entries: 512
[4294670.604000] CPU: After generic identify, caps: bfebfbff 00000000
00000000 00000000 0000441d 00000000 00000000
[4294670.604000] CPU: After vendor identify, caps: bfebfbff 00000000
00000000 00000000 0000441d 00000000 00000000
[4294670.604000] monitor/mwait feature present.
[4294670.604000] using mwait in idle threads.
[4294670.604000] CPU: Trace cache: 12K uops, L1 D cache: 16K
[4294670.604000] CPU: L2 cache: 1024K
[4294670.604000] CPU: After all inits, caps: bfebfbff 00000000 00000000
00000080 0000441d 00000000 00000000
// linea borrada. info cpu -> comentario mio
[4294670.604000] Enabling fast FPU save and restore... done.
[4294670.604000] Enabling unmasked SIMD FPU exception support... done.
[4294670.604000] Checking 'hlt' instruction... OK.
[4294670.608000] Checking for popad bug... OK.
[4294670.608000] checking if image is initramfs... it is
[4294671.459000] Freeing initrd memory: 5150k freed
[4294671.479000] ACPI: Looking for DSDT in initrd... not found! -->
IMPORTANTE???
[4294671.569000]  not found!
[4294671.583000] ENABLING IO-APIC IRQs
[4294671.583000] ..TIMER: vector=0x31 pin1=2 pin2=-1
[4294671.694000] NET: Registered protocol family 16
[4294671.694000] EISA bus registered
[4294671.694000] ACPI: bus type pci registered
[4294671.715000] PCI: PCI BIOS revision 2.10 entry at 0xfd768, last bus=2
[4294671.715000] PCI: Using configuration type 1
[4294671.715000] mtrr: v2.0 (20020519)
[4294671.716000] ACPI: Subsystem revision 20050729
[4294671.721000]     ACPI-0362: *** Error: Looking up [Z00B] in namespace,
AE_NOT_FOUND
[4294671.721000] search_node dbf56700 start_node dbf56700 return_node
00000000
[4294671.722000] ACPI: Interpreter enabled
[4294671.722000] ACPI: Using IOAPIC for interrupt routing
[4294671.723000] ACPI: PCI Root Bridge [PCI0] (0000:00)
[4294671.723000] PCI: Probing PCI hardware (bus 00)
[4294671.723000] ACPI: Assume root bridge [\_SB_.PCI0] segment is 0
[4294671.724000] PCI: Ignoring BAR0-3 of IDE controller 0000:00:14.1
[4294671.724000] Boot video device is 0000:01:05.0
[4294671.725000] PCI: Transparent bridge - 0000:00:14.4
[4294671.726000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[4294671.727000] ACPI: PCI Interrupt Link [LNK0] (IRQs 10 11) *0, disabled.
[4294671.727000] ACPI: PCI Interrupt Link [LNK1] (IRQs 10 11) *0, disabled.
[4294671.727000] ACPI: PCI Interrupt Link [LNK2] (IRQs 10 11) *0, disabled.
[4294671.727000] ACPI: PCI Interrupt Link [LNK3] (IRQs 10 11) *0, disabled.
[4294671.728000] burst-mode-ec-10-Aug
[4294671.728000] ACPI: Embedded Controller [EC0] (gpe 6)
[4294671.737000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
[4294671.738000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
[4294671.738000] Linux Plug and Play Support v0.97 (c) Adam Belay
[4294671.738000] pnp: PnP ACPI init
[4294671.742000] pnp: PnP ACPI: found 10 devices
[4294671.742000] PnPBIOS: Disabled by ACPI PNP
[4294671.742000] PCI: Using ACPI for IRQ routing
[4294671.742000] PCI: If a device doesn't work, try "pci=routeirq".  If it
helps, post a report
[4294671.746000] pnp: 00:06: ioport range 0x1080-0x1080 has been reserved
[4294671.746000] pnp: 00:06: ioport range 0x220-0x22f has been reserved
[4294671.746000] pnp: 00:06: ioport range 0x40b-0x40b has been reserved
[4294671.746000] pnp: 00:06: ioport range 0x4d0-0x4d1 has been reserved
[4294671.746000] audit: initializing netlink socket (disabled)
[4294671.746000] audit: initialized
[4294671.746000] VFS: Disk quotas dquot_6.5.1
[4294671.746000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[4294671.747000] devfs: 2004-01-31 Richard Gooch (rgooch en atnf.csiro.au)
[4294671.747000] devfs: boot_options: 0x0
[4294671.747000] Initializing Cryptographic API
[4294671.747000] isapnp: Scanning for PnP cards...
[4294672.095000] isapnp: No Plug & Play device found
[4294672.113000] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:MSE0] at
0x60,0x64 irq 1,12
[4294673.108000] serio: i8042 AUX port at 0x60,0x64 irq 12
[4294673.110000] serio: i8042 KBD port at 0x60,0x64 irq 1
[4294673.110000] Serial: 8250/16550 driver $Revision: 1.90 $ 54 ports, IRQ
sharing enabled
[4294673.110000] ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[4294673.112000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low)
-> IRQ 17
[4294673.112000] ACPI: PCI interrupt for device 0000:00:14.6 disabled
[4294673.113000] io scheduler noop registered
[4294673.113000] io scheduler anticipatory registered
[4294673.113000] io scheduler deadline registered
[4294673.113000] io scheduler cfq registered
[4294673.113000] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[4294673.115000] EISA: Probing bus 0 at eisa.0
[4294673.115000] Cannot allocate resource for EISA slot 1
[4294673.115000] Cannot allocate resource for EISA slot 8
[4294673.115000] EISA: Detected 0 cards. --> QUÉ ES ESTO??
[4294673.115000] NET: Registered protocol family 2
[4294673.125000] IP: routing cache hash table of 4096 buckets, 32Kbytes
[4294673.125000] TCP established hash table entries: 16384 (order: 5, 131072
bytes)
[4294673.125000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[4294673.125000] TCP: Hash tables configured (established 16384 bind 16384)
[4294673.125000] NET: Registered protocol family 8
[4294673.125000] NET: Registered protocol family 20
[4294673.125000] ACPI wakeup devices:
[4294673.125000] ELAN OHC1 OHC2 EHCI MODM
[4294673.125000] ACPI: (supports S0 S3 S4 S5)
[4294673.125000] Freeing unused kernel memory: 224k freed
[4294673.153000] Capability LSM initialized
[4294673.164000] NET: Registered protocol family 1
[4294673.176000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[4294673.176000] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[4294673.176000] ACPI: bus type ide registered
[4294673.181000] ATIIXP: IDE controller at PCI slot 0000:00:14.1
[4294673.181000] ACPI: PCI Interrupt 0000:00:14.1[A] -> GSI 16 (level, low)
-> IRQ 16
[4294673.181000] ATIIXP: chipset revision 0
[4294673.182000] ATIIXP: not 100% native mode: will probe irqs later
[4294673.182000]     ide0: BM-DMA at 0x8070-0x8077, BIOS settings: hda:DMA,
hdb:pio
[4294673.182000]     ide1: BM-DMA at 0x8078-0x807f, BIOS settings: hdc:DMA,
hdd:pio
[4294673.182000] Probing IDE interface ide0...
// tipo de disco duro
[4294673.723000] input: AT Translated Set 2 keyboard on isa0060/serio0
[4294673.724000] atkbd.c: Spurious ACK on isa0060/serio0. Some program, like
XFree86, might be trying access hardware directly.
[4294674.057000] ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
[4294674.057000] Probing IDE interface ide1...
// tipo dvd - grabadora
[4294675.341000] ide1 at 0x170-0x177,0x376 on irq 15
[4294675.341000] Probing IDE interface ide2...
[4294675.854000] Probing IDE interface ide3...
[4294676.366000] Probing IDE interface ide4...
[4294676.878000] Probing IDE interface ide5...
[4294677.393000] hda: max request size: 1024KiB
[4294677.393000] hda: 117210240 sectors (60011 MB) w/8192KiB Cache,
CHS=16383/255/63, UDMA(100)
[4294677.393000] hda: cache flushes supported
[4294677.394000]  /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 < p5 p6 p7 >
// tipo dvd - grabadora
[4294677.489000] Uniform CD-ROM driver Revision: 3.20
[4294677.728000] Attempting manual resume
[4294677.728000] swsusp: Suspend partition has wrong signature? -> QUÉ ES
ESTO???
[4294677.748000] usbcore: registered new driver usbfs
[4294677.748000] usbcore: registered new driver hub
[4294677.749000] ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI)
Driver (PCI)
[4294677.749000] ACPI: PCI Interrupt 0000:00:13.0[A] -> GSI 19 (level, low)
-> IRQ 19
[4294677.749000] ohci_hcd 0000:00:13.0: ATI Technologies Inc OHCI USB
Controller #1
[4294678.005000] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus
number 1
[4294678.005000] ohci_hcd 0000:00:13.0: irq 19, io mem 0xe8001000
[4294678.060000] hub 1-0:1.0: USB hub found
[4294678.060000] hub 1-0:1.0: 3 ports detected
[4294678.065000] ACPI: PCI Interrupt 0000:00:13.1[A] -> GSI 19 (level, low)
-> IRQ 19
[4294678.065000] ohci_hcd 0000:00:13.1: ATI Technologies Inc OHCI USB
Controller #2
[4294678.320000] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus
number 2
[4294678.320000] ohci_hcd 0000:00:13.1: irq 19, io mem 0xe8002000
[4294678.375000] hub 2-0:1.0: USB hub found
[4294678.375000] hub 2-0:1.0: 3 ports detected
[4294678.393000] ACPI: PCI Interrupt 0000:00:13.2[A] -> GSI 19 (level, low)
-> IRQ 19
[4294678.393000] ehci_hcd 0000:00:13.2: ATI Technologies Inc EHCI USB
Controller
[4294678.393000] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus
number 3
[4294678.393000] ehci_hcd 0000:00:13.2: irq 19, io mem 0xe8003000
[4294678.393000] ehci_hcd 0000:00:13.2: USB 2.0 initialized, EHCI 1.00,
driver 10 Dec 2004
[4294678.393000] hub 3-0:1.0: USB hub found
[4294678.393000] hub 3-0:1.0: 6 ports detected
[4294678.467000] 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004)
[4294678.467000] 8139cp: pci dev 0000:02:03.0 (id 10ec:8139 rev 10) is not
an 8139C+ compatible chip
[4294678.467000] 8139cp: Try the "8139too" driver instead.
[4294678.469000] 8139too Fast Ethernet driver 0.9.27
[4294678.469000] ACPI: PCI Interrupt 0000:02:03.0[A] -> GSI 19 (level, low)
-> IRQ 19
[4294678.469000] eth0: RealTek RTL8139 at 0xa000, 00:02:3f:0d:4e:44, IRQ 19
[4294678.469000] eth0:  Identified 8139 chip type 'RTL-8100B/8139D'
[4294678.992000] usb 1-2: new low speed USB device using ohci_hcd and
address 2
[4294680.489000] usbcore: registered new driver hiddev
// tipo de ratón que tengo
[4294680.497000] usbcore: registered new driver usbhid
[4294680.497000] drivers/usb/input/hid-core.c: v2.01:USB HID core driver
[4294680.757000] ACPI: CPU0 (power states: C1[C1])
[4294680.890000] Attempting manual resume
[4294680.890000] swsusp: Suspend partition has wrong signature?
[4294680.900000] kjournald starting.  Commit interval 5 seconds
[4294680.900000] EXT3-fs: mounted filesystem with ordered data mode.
[4294682.869000] md: md driver 0.90.1 MAX_MD_DEVS=256, MD_SB_DISKS=27
[4294685.827000] Adding 273064k swap on /dev/hda7.  Priority:-1 extents:1
[4294686.044000] EXT3 FS on hda6, internal journal
[4294697.364000] lp: driver loaded but no devices found
[4294697.376000] mice: PS/2 mouse device common for all mice
[4294697.396000] ndiswrapper version 1.1 loaded (preempt=no,smp=no)
[4294697.502000] ndiswrapper: driver neti2220 (LanExpress,08/16/2004,
2.23.08.2004) loaded
[4294697.502000] ACPI: PCI Interrupt 0000:02:02.0[A] -> GSI 18 (level, low)
-> IRQ 18
[4294697.536000] ndiswrapper: using irq 18
[4294697.956000] Synaptics Touchpad, model: 1, fw: 5.9, id: 0x126eb1, caps:
0xa04713/0x4000
[4294697.958000] input: SynPS/2 Synaptics TouchPad on isa0060/serio1
[4294698.049000] wlan0: ndiswrapper ethernet device 00:0e:9b:7d:33:25 using
driver neti2220, configuration file 17FE:2220:1468:0305.5.conf
[4294698.049000] wlan0: encryption modes supported: WEP, WPA with TKIP, WPA
with AES/CCMP
[4294698.230000] ts: Compaq touchscreen protocol output
[4294701.692000] device-mapper: 4.4.0-ioctl (2005-01-12) initialised:
dm-devel en redhat.com
[4294703.600000] cdrom: open failed. -> POR QUÉ???
[4294704.609000] NTFS driver 2.1.22 [Flags: R/O MODULE].
[4294704.675000] NTFS volume version 3.1.
[4294705.662000] Linux agpgart interface v0.101 (c) Dave Jones
[4294705.669000] agpgart: Detected Ati IGP9100/M chipset
[4294705.690000] agpgart: AGP aperture is 32M @ 0xea000000
[4294705.903000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[4294705.915000] shpchp: shpc_init : shpc_cap_offset == 0
[4294705.915000] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[4294706.324000] ACPI: PCI Interrupt 0000:00:14.5[B] -> GSI 17 (level, low)
-> IRQ 17
[4294706.325000] atiixp: codec reset timeout
[4294707.195000] ACPI: PCI Interrupt 0000:00:14.6[B] -> GSI 17 (level, low)
-> IRQ 17
[4294707.481000] Linux Kernel Card Services
[4294707.481000]   options:  [pci] [cardbus] [pm]
[4294707.493000] ACPI: PCI Interrupt 0000:02:04.0[A] -> GSI 16 (level, low)
-> IRQ 16
[4294707.493000] Yenta: CardBus bridge found at 0000:02:04.0 [1025:0065]
[4294707.493000] Yenta: Using CSCINT to route CSC interrupts to PCI
[4294707.493000] Yenta: Routing CardBus interrupts to PCI
[4294707.493000] Yenta TI: socket 0000:02:04.0, mfunc 0x00111c12, devctl
0x44
[4294707.714000] Yenta: ISA IRQ mask 0x0200, PCI irq 16
[4294707.714000] Socket status: 30000006
[4294709.440000] Real Time Clock Driver v1.12
[4294709.528000] input: PC Speaker
[4294713.194000] ACPI: AC Adapter [ACAD] (on-line)
[4294713.233000] ACPI: Battery Slot [BAT1] (battery absent)
[4294713.251000] ACPI: Power Button (FF) [PWRF]
[4294713.251000] ACPI: Lid Switch [LID]
[4294713.251000] ACPI: Power Button (CM) [PWRB]
[4294713.347000] ibm_acpi: ec object not found
[4294713.448000] ACPI: Video Device [VGA] (multi-head: yes  rom: no  post:
no)
[4294718.863000] [drm] Initialized drm 1.0.0 20040925
[4294718.865000] ACPI: PCI Interrupt 0000:01:05.0[A] -> GSI 16 (level, low)
-> IRQ 16
[4294718.868000] [drm] Initialized radeon 1.16.0 20050311 on minor 0: ATI
Technologies Inc RS300M AGP [Radeon Mobility 9100IGP]
[4294718.869000] agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
[4294718.869000] agpgart: reserved bits set in mode 0x1f00020f. Fixed.
[4294718.869000] agpgart: Xorg tried to set rate=x12. Setting to AGP3 x8
mode.
[4294718.869000] agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
[4294718.869000] agpgart: Putting AGP V3 device at 0000:01:05.0 into 8x mode
[4294719.210000] [drm] Loading R200 Microcode
[4294724.438000] apm: BIOS not found.
[4294725.897000] Bluetooth: Core ver 2.7
[4294725.897000] NET: Registered protocol family 31
[4294725.897000] Bluetooth: HCI device and connection manager initialized
[4294725.897000] Bluetooth: HCI socket layer initialized
[4294725.921000] Bluetooth: L2CAP ver 2.7
[4294725.921000] Bluetooth: L2CAP socket layer initialized
[4294725.950000] Bluetooth: RFCOMM ver 1.5
[4294725.950000] Bluetooth: RFCOMM socket layer initialized
[4294725.950000] Bluetooth: RFCOMM TTY layer initialized
[4294730.656000] NET: Registered protocol family 10
[4294730.656000] Disabled Privacy Extensions on device c02eb280(lo)
[4294730.656000] IPv6 over IPv4 tunneling driver
[4294740.828000] wlan0: no IPv6 routers present
[4295027.828000] ibm_acpi: ec object not found
[4295112.224000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295115.632000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295115.632000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295137.230000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295137.313000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295156.063000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.
[4295156.064000] NTFS-fs error (device hda2): ntfs_ucstonls(): Unicode name
contains characters that cannot be converted to character set cp437.

//*******************************************

El día 18/02/06, Sebastian Saenz Ford <ssaenzford en gmail.com> escribió:
>
> On 2/18/06, Albertito <atetinho en gmail.com> wrote:
> > hola!
> >
> >  creo que son poco importantes. existe alguna forma de escribir en un
> > fichero de texto todo lo que muestra ubuntu en el arranque o apagado del
> > sistema para luego poder hacer un filtrado y os lo muestre para que
> podáis
> > ayudarme?
> >
> > gracias!
> >
> > agur!
>
> dmesg > archivo.txt
>
> --
> ubuntu-es mailing list
> ubuntu-es en lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-es
>

--
---------------------------------------------------------
Alberto Villanueva Del Val
Blog Personal: http://www.ifelsedeveloper.blogia.com
--------------------------------------------------------
------------ próxima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: https://lists.ubuntu.com/archives/ubuntu-es/attachments/20060219/be35ef6f/attachment-0001.htm