Ayuda con lilo
Ricardo Frydman
ricardo en sinectis.com.ar
Lun Abr 4 08:54:50 CDT 2005
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
El profe Roman wrote:
| Ricardo Frydman escribió:
|
|>-----BEGIN PGP SIGNED MESSAGE-----
|>Hash: SHA1
|>
|>El profe Roman wrote:
|>| Ricardo Frydman escribió:
|>|
|>|>>El profe Roman wrote:
|>|>>|
|>|>>|>>y vos pensabas que era error del grub? :D
|>|>>|>>EVidentemente hay algo conceptualmente errado con respecto a los
|>|>>|>>gestores de arranque :D
|>|>>|>>
|>|>>|>>grub error 18 -> google/linux
|>|>>|>>Se buscó grub error 18 en la Web. Resultados 1 - 10 de
|>|>>aproximadamente
|>|>>|>>70,000.
|>|>>|>>
|>|>>|>>bravo! tenemos una respuesta del mismo ubuntu!:
|>|>>|>>http://www.ubuntulinux.org/wiki/WartyWarthogInstallNotes
|>|>>|>>
|>|>>|>>"Older computers with large hard disks (GRUB Error 18)
|>|>>|>>
|>|>>|>>
|>|>>|
|>|>>|
|>|>>| El tema es que mi computadora es un Athlon XP 2000+, con un mother
|>Asus
|>|>>| A7V8X y un disco de 80 Gb (de viejo, nada!)... :(
|>|>>|
|>|>>|
|>|>>
|>|>>ok, pero te da una punta del problema, presta atencion a la segunda
|>|>>respuesta, de modificar en la BIOS el reconocimiento del hd.
|>|>>
|>|>>|>>Prmera pregunta: warty verdad?
|>|>>|
|>|>>|
|>|>>| Ubuntu 4.10... o sea warty?
|>|>>mmm ni idea :D aver....si, correcto 4=2005, 10=octubre = 4.10
|>|>>Hoary (la mas nueva) 5.04 2005, abril. Tengo entendido que los ubuntos
|>|>>releasean cada 6 meses abril y octubre.
|>|>>
|>|>>|
|>|>>|
|>|>>|>>Segundo: manda el lilo.conf y/o el /boot/grub/menu.lst (el q decidas
|>|>>|>>instalar)
|>|>>|
|>|>>|
|>|>>| boot=/dev/hda
|>|>>| map=/boot/map
|>|>>| default="MandrakeLinux"
|>|>>| keytable=/boot/us-latin1.klt
|>|>>| prompt
|>|>>| nowarn
|>|>>| timeout=100
|>|>>| message=/boot/message
|>|>>| menu-scheme=wb:bw:wb:bw
|>|>>| image=/boot/vmlinuz
|>|>>| label="MandrakeLinux"
|>|>>| root=/dev/hda6
|>|>>| initrd=/boot/initrd.img
|>|>>| append="devfs=mount acpi=ht resume=/dev/hda5 splash=silent"
|>|>>| vga=788
|>|>>| read-only
|>|>>| image=/boot/vmlinuz
|>|>>| label="failsafe"
|>|>>| root=/dev/hda6
|>|>>| initrd=/boot/initrd.img
|>|>>| append="failsafe acpi=ht resume=/dev/hda5 devfs=nomount"
|>|>>| read-only
|>|>>| image=/Ututo-e/boot/kernel-2.6.6
|>|>>| label="Ututo-e266"
|>|>>| root=/Ututo-e
|>|>>| initrd=/Ututo-e/boot/initrd-2.6.6
|>|>>| append="root=/dev/ram0 real_root=/dev/hda8 init=/linuxrc"
|>|>>| read-only
|>|>>| other=/dev/hda1
|>|>>| label="windows"
|>|>>| table=/dev/hda
|>|>>| other=/dev/fd0
|>|>>| label="floppy"
|>|>>| unsafe
|>|>>*****
|>|>>| image=/ubuntu/boot/vmlinuz-2.6.8.1-3-386
|>|>>| label="Ubuntu"
|>|>>| root=/dev/hda12
|>|>>| initrd=/boot/initrd-2.6.3-7mdk.img
|>|>>| read-only
|>|>>|
|>|>>mmm estas usando ubuntu , pero le pasas initrd de mdk?
|>|
|>|
|>| cuac!
|>;)
|>
|>|
|>| Era eso, ahora ya bootea (casi) sin errores.
|>
|>casi?
|>
|>|
|>| El ifconfig de ahora me dice:
|>|
|>| eth0 Link encap:Ethernet HWaddr 00:0E:A6:D2:6C:F9
|>| inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
|>| inet6 addr: fe80::20e:a6ff:fed2:6cf9/64 Scope:Link
|>| UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
|>| RX packets:18 errors:0 dropped:0 overruns:0 frame:0
|>| TX packets:68 errors:0 dropped:0 overruns:0 carrier:0
|>| collisions:0 txqueuelen:1000
|>| RX bytes:1656 (1.6 KiB) TX bytes:5576 (5.4 KiB)
|>| Interrupt:193 Base address:0xe800
|>|
|>| lo Link encap:Local Loopback
|>| inet addr:127.0.0.1 Mask:255.0.0.0
|>| inet6 addr: ::1/128 Scope:Host
|>| UP LOOPBACK RUNNING MTU:16436 Metric:1
|>| RX packets:22094 errors:0 dropped:0 overruns:0 frame:0
|>| TX packets:22094 errors:0 dropped:0 overruns:0 carrier:0
|>| collisions:0 txqueuelen:0
|>| RX bytes:1618129 (1.5 MiB) TX bytes:1618129 (1.5 MiB)
|>|
|>| Lo que no encuentro es dónde configurar ppp. Ya que tengo adsl de speedy
|>| y requiere usuario y contraseña para tener servicio.
|>
|>
|>pppoeconfig!
|>
|>|
|>| en el caso de mandrake, el ifconfig me muestra también una interfaz ppp0
|>| de esta manera:
|>
|>te la crea al establecerse la comunicacion mediante ppp : pppoeconfig!
|
|
| Lo hice, pude ingresar los datos de mi cuenta y ahora en el ifconfig veo
| tambien:
|
| ppp0 Link encap:Point-to-Point Protocol
| inet addr:168.226.10.158 P-t-P:192.168.96.238
| Mask:255.255.255.255
me llama la atencion esos valores, que isP
que tenias con mandrake?
manda lsmod
| UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1
| RX packets:128 errors:0 dropped:0 overruns:0 frame:0
| TX packets:3 errors:0 dropped:0 overruns:0 carrier:0
| collisions:0 txqueuelen:3
| RX bytes:6706 (6.5 KiB) TX bytes:54 (54.0 b)
|
| Pero no funciona la conexión:
|
| root en ubuntu:/home/roman # pon
| Plugin rp-pppoe.so loaded.
| RP-PPPoE plugin version 3.3 compiled against pppd 2.4.2
|
y si en vez de pon probas pppd call nombreconexion?
| root en ubuntu:/home/roman # ping 212.15.82.22
| PING 212.15.82.22 (212.15.82.22) 56(84) bytes of data.
|>From 192.168.1.1 icmp_seq=1 Destination Net Unreachable
|>From 192.168.1.1 icmp_seq=2 Destination Net Unreachable
|
| --- 212.15.82.22 ping statistics ---
| 2 packets transmitted, 0 received, +2 errors, 100% packet loss, time 999ms
|
| Por dónde sigo?
|
controla las dns de tu isp
/etc/resolv.conf
nameserver xxx.xxx.xxx.xxx
nameserver yyy.yyy.yyy.yyy
- --
Ricardo A.Frydman
Consultor en Tecnología Open Source
Administrador de Sistemas
http://www.eureka-linux.com.ar
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.2.5 (GNU/Linux)
iD8DBQFCUUcpkw12RhFuGy4RAqDVAJ9Z9Hg78G9HVuoLhc0LLdWgin/vXgCfa8Oq
pDwt/OyXW3kqxm4eMvnJgjw=
=m6oW
-----END PGP SIGNATURE-----
Más información sobre la lista de distribución ubuntu-es