Hoary installation report on Sony VGN-S3XP

[Ondřej Surý]

On Fri, 2005-04-01 at 06:48 -0800, Matt Zimmerman wrote:
> On Fri, Apr 01, 2005 at 09:17:49AM +0200, Ondřej Surý wrote:
> 
> > On Thu, 2005-03-31 at 12:48 -0800, Matt Zimmerman wrote:
> > > Can you be more specific?
> > 
> > Some stuff about block device not supporting command also disappeared.
> > But some other stuff still remain, on boot it prints:
> > 
> > ata2: disabling port
> 
> I need the exact error messages and context in order to help.
> I wouldn't worry about the ata2 message unless you're having a problem with
> your disks.

Well, I thought it was in attached kern.log?

ata_piix version 1.03
ACPI: PCI interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1f.2 to 64
ata1: SATA max UDMA/133 cmd 0x18C0 ctl 0x18BA bmdma 0x18A0 irq 18
ata2: SATA max UDMA/133 cmd 0x18B0 ctl 0x1896 bmdma 0x18A8 irq 18
ata1: dev 0 cfg 49:2f00 82:346b 83:7f09 84:6063 85:3469 86:3f09 87:6063 88:203f
ata1: dev 0 ATA, max UDMA/100, 156301488 sectors: lba48
ata1: dev 0 configured for UDMA/100
scsi0 : ata_piix
ATA: abnormal status 0x7F on port 0x18B7

ata2: disabling port

scsi1 : ata_piix
elevator: using anticipatory as default io scheduler
  Vendor: ATA       Model: FUJITSU MHT2080B  Rev: 4000
  Type:   Direct-Access                      ANSI SCSI revision: 05
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
SCSI device sda: drive cache: write back
 /dev/scsi/host0/bus0/target0/lun0: p1 p2 p3 < p5 >
Attached scsi disk sda at scsi0, channel 0, id 0, lun 0

Ondrej.
-- 
Ondřej Surý <ondrej at sury.org>