DVD wird nicht erkannt

Ralf Lehmeier r.lehmeier at freenet.de
Die Mar 31 18:36:12 BST 2009


Nils Kassube schrieb:
> Ralf Lehmeier wrote:
>> Hallo!
>> Ich setze Ubuntu 8.10 ein und möchte damit auch gerne Filme
>> anschauen. Nun habe ich das Problem das mein DVD-Laufwerk ( IDE )
>> nicht als DVD-Laufwerk erkannt wird. Zwar werden Cd´s erkannt aber
>> leider keine DVD´s. Auch Daten-DVD´s werden nicht erkannt.
> 
> Was kommt denn als Ausgabe bei diesen Befehlen?
> 
> ls /dev/dvd*
> sudo lshw -C disk
> 
0.000000] Initializing cgroup subsys cpuset
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Linux version 2.6.27-11-generic (buildd at rothera) (gcc 
version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC 
2009 (Ubuntu 2.6.27-11.27-generic)
[    0.000000] BIOS-provided physical RAM map: 
 

[    0.000000]  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) 
 

[    0.000000]  BIOS-e820: 000000000009fc00 - 00000000000a0000 
(reserved) 

[    0.000000]  BIOS-e820: 00000000000f0000 - 0000000000100000 
(reserved) 

[    0.000000]  BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) 
 

[    0.000000]  BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI 
data) 

[    0.000000]  BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI 
NVS) 

[    0.000000]  BIOS-e820: 00000000fec00000 - 00000000fec01000 
(reserved) 

[    0.000000]  BIOS-e820: 00000000fee00000 - 00000000fee01000 
(reserved) 

[    0.000000]  BIOS-e820: 00000000fff80000 - 0000000100000000 
(reserved) 

[    0.000000] DMI 2.3 present. 
 

[    0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it 
around. 

[    0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000 
 

[    0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000 
 

[    0.000000] RAMDISK: 377a2000 - 37fef4c9 
 

[    0.000000] ACPI: RSDP 000FA910, 0014 (r0 AMI   ) 
 

[    0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7         10 
MSFT       97) 

[    0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7         11 
MSFT       97) 

[    0.000000] ACPI: DSDT 3FFF0120, 3252 (r1    VIA    K7VT4     1000 
MSFT  100000D) 

[    0.000000] ACPI: FACS 3FFF8000, 0040 
 

[    0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7          9 
MSFT       97) 

[    0.000000] 127MB HIGHMEM available. 
 

[    0.000000] 896MB LOWMEM available. 
 

[    0.000000]   mapped low ram: 0 - 38000000 
 

[    0.000000]   low ram: 00000000 - 38000000 
 

[    0.000000]   bootmap 00011000 - 00018000 
 

[    0.000000] (9 early reservations) ==> bootmem [0000000000 - 
0038000000] 

[    0.000000]   #0 [0000000000 - 0000001000]   BIOS data page ==> 
[0000000000 - 0000001000] 

[    0.000000]   #1 [0000001000 - 0000002000]    EX TRAMPOLINE ==> 
[0000001000 - 0000002000] 

[    0.000000]   #2 [0000006000 - 0000007000]       TRAMPOLINE ==> 
[0000006000 - 0000007000] 

[    0.000000]   #3 [0000100000 - 00005c29e0]    TEXT DATA BSS ==> 
[0000100000 - 00005c29e0] 

[    0.000000]   #4 [00377a2000 - 0037fef4c9]          RAMDISK ==> 
[00377a2000 - 0037fef4c9] 

[    0.000000]   #5 [00005c3000 - 00005c6000]    INIT_PG_TABLE ==> 
[00005c3000 - 00005c6000] 

[    0.000000]   #6 [000009fc00 - 0000100000]    BIOS reserved ==> 
[000009fc00 - 0000100000] 

[    0.000000]   #7 [0000010000 - 0000011000]          PGTABLE ==> 
[0000010000 - 0000011000] 

[    0.000000]   #8 [0000011000 - 0000018000]          BOOTMAP ==> 
[0000011000 - 0000018000] 

[    0.000000] Zone PFN ranges: 
 
 

[    0.000000]   DMA      0x00000010 -> 0x00001000 
 
 

[    0.000000]   Normal   0x00001000 -> 0x00038000 
 
 

[    0.000000]   HighMem  0x00038000 -> 0x0003fff0 
 
 

[    0.000000] Movable zone start PFN for each node 
 
 

[    0.000000] early_node_map[2] active PFN ranges 
 
 

[    0.000000]     0: 0x00000010 -> 0x0000009f 
 
 

[    0.000000]     0: 0x00000100 -> 0x0003fff0 
 
 

[    0.000000] On node 0 totalpages: 262015 
 
 

[    0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map 
c1000240 
 

[    0.000000]   DMA zone: 3947 pages, LIFO batch:0 
 
 

[    0.000000]   Normal zone: 223300 pages, LIFO batch:31 
 
 

[    0.000000]   HighMem zone: 32464 pages, LIFO batch:7 
 
 

[    0.000000] ACPI: PM-Timer IO Port: 0x808 
 
 

[    0.000000] ACPI: Local APIC address 0xfee00000 
 
 

[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) 
 
 

[    0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) 
 
 

[    0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 
0-23 
 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) 
 
 

[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low 
level) 
 

[    0.000000] ACPI: IRQ0 used by override. 
 
 

[    0.000000] ACPI: IRQ2 used by override. 
 
 

[    0.000000] ACPI: IRQ9 used by override. 
 
 

[    0.000000] Enabling APIC mode:  Flat.  Using 1 I/O APICs 
 
 

[    0.000000] Using ACPI (MADT) for SMP configuration information 
 
 

[    0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs 
 
 

[    0.000000] mapped APIC to ffffb000 (fee00000) 
 
 

[    0.000000] mapped IOAPIC to ffffa000 (fec00000) 
 
 

[    0.000000] PM: Registered nosave memory: 000000000009f000 - 
00000000000a0000 
 

[    0.000000] PM: Registered nosave memory: 00000000000a0000 - 
00000000000f0000 
 

[    0.000000] PM: Registered nosave memory: 00000000000f0000 - 
0000000000100000 
 

[    0.000000] Allocating PCI resources starting at 50000000 (gap: 
40000000:bec00000) 
 

[    0.000000] PERCPU: Allocating 41628 bytes of per cpu data 
 
 

[    0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1 
 
 

[    0.000000] Built 1 zonelists in Zone order, mobility grouping on. 
Total pages: 259711 
 

[    0.000000] Kernel command line: 
root=UUID=eceb711c-2599-4ddc-9055-6176decf6ce8 ro quiet splash 
 

[    0.000000] Enabling fast FPU save and restore... done. 
 
 

[    0.000000] Enabling unmasked SIMD FPU exception support... done. 
 
 

[    0.000000] Initializing CPU#0 
 
 

[    0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) 
 
 

[    0.000000] TSC: PIT calibration confirmed by PMTIMER. 
 
 

[    0.000000] TSC: using PMTIMER calibration value 
 
 

[    0.000000] Detected 1531.828 MHz processor. 
 
 

[    0.004000] Console: colour VGA+ 80x25 
 
 

[    0.004000] console [tty0] enabled 
 
 

[    0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 
bytes) 
 

[    0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 
bytes) 
 

[    0.004000] Memory: 1024296k/1048512k available (2576k kernel code, 
23480k reserved, 1165k data, 424k init, 131008k highmem) 
 

[    0.004000] virtual kernel memory layout: 
 
 

[    0.004000]     fixmap  : 0xffc77000 - 0xfffff000   (3616 kB) 
 
 

[    0.004000]     pkmap   : 0xff400000 - 0xff800000   (4096 kB) 
 
 

[    0.004000]     vmalloc : 0xf8800000 - 0xff3fe000   ( 107 MB) 
 
 

[    0.004000]     lowmem  : 0xc0000000 - 0xf8000000   ( 896 MB) 
 
 

[    0.004000]       .init : 0xc04ad000 - 0xc0517000   ( 424 kB) 
 
 

[    0.004000]       .data : 0xc03840da - 0xc04a7680   (1165 kB) 
 
 

[    0.004000]       .text : 0xc0100000 - 0xc03840da   (2576 kB) 
 
 

[    0.004000] Checking if this processor honours the WP bit even in 
supervisor mode...Ok. 
 

[    0.004000] CPA: page pool initialized 1 of 1 pages preallocated 
 
 

[    0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0, 
CPUs=1, Nodes=1 
 

[    0.004021] Calibrating delay loop (skipped), value calculated using 
timer frequency.. 3063.65 BogoMIPS (lpj=6127312) 
 

[    0.004059] Security Framework initialized 
 
 

[    0.004073] SELinux:  Disabled at boot. 
 
 

[    0.004119] AppArmor: AppArmor initialized 
 
 

[    0.004134] Mount-cache hash table entries: 512 
 
 

[    0.004423] Initializing cgroup subsys ns 
 
 

[    0.004430] Initializing cgroup subsys cpuacct 
 
 

[    0.004434] Initializing cgroup subsys memory 
 
 

[    0.004458] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 
bytes/line) 
 

[    0.004462] CPU: L2 Cache: 256K (64 bytes/line) 
 
 

[    0.004487] Checking 'hlt' instruction... OK. 
 
 

[    0.020452] SMP alternatives: switching to UP code 
 
 

[    0.027761] Freeing SMP alternatives: 11k freed 
 
 

[    0.027769] ACPI: Core revision 20080609 
 
 

[    0.029840] ACPI: Checking initramfs for custom DSDT 
 
 

[    0.488664] ENABLING IO-APIC IRQs 
 
 

[    0.488986] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 
 
 

[    0.528693] CPU0: AMD Athlon(tm) XP 1800+ stepping 02 
 
 

[    0.532031] Brought up 1 CPUs 
 
 

[    0.532031] Total of 1 processors activated (3063.65 BogoMIPS). 
 
 

[    0.532031] CPU0 attaching NULL sched-domain. 
 
 

[    0.532031] net_namespace: 840 bytes 
 
 

[    0.532031] Booting paravirtualized kernel on bare hardware 
 
 

[    0.532031] Time: 15:56:47  Date: 03/31/09 
 
 

[    0.532031] NET: Registered protocol family 16 
 
 

[    0.532031] EISA bus registered 
 
 

[    0.532031] ACPI: bus type pci registered 
 
 

[    0.544834] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1 
 
 

[    0.544839] PCI: Using configuration type 1 for base access 
 
 

[    0.547212] ACPI: EC: Look up EC in DSDT 
 
 

[    0.555681] ACPI: Interpreter enabled 
 
 

[    0.555688] ACPI: (supports S0 S1 S4 S5) 
 
 

[    0.555710] ACPI: Using IOAPIC for interrupt routing 
 
 

[    0.563583] ACPI: PCI Root Bridge [PCI0] (0000:00) 
 
 

[    0.563716] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff] 
 
 

[    0.563797] pci 0000:00:01.0: supports D1 
 
 

[    0.563838] PCI: 0000:00:0a.0 reg 10 32bit mmio: [dffffc00, dfffffff] 
 
 

[    0.563878] pci 0000:00:0a.0: supports D1 
 
 

[    0.563881] pci 0000:00:0a.0: supports D2 
 
 

[    0.563924] PCI: 0000:00:0d.0 reg 10 32bit mmio: [dffc0000, dffdffff] 
 
 

[    0.563932] PCI: 0000:00:0d.0 reg 14 32bit mmio: [dffa0000, dffbffff] 
 
 

[    0.563940] PCI: 0000:00:0d.0 reg 18 io port: [ec00, ec1f] 
 
 

[    0.563961] PCI: 0000:00:0d.0 reg 30 32bit mmio: [fffe0000, ffffffff] 
 
 

[    0.563983] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold 
 
 

[    0.563989] pci 0000:00:0d.0: PME# disabled 
 
 

[    0.564053] PCI: 0000:00:10.0 reg 20 io port: [e000, e01f] 
 
 

[    0.564076] pci 0000:00:10.0: supports D1 
 
 

[    0.564079] pci 0000:00:10.0: supports D2 
 
 

[    0.564082] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot 
D3cold 
 

[    0.564088] pci 0000:00:10.0: PME# disabled 
 
 

[    0.564133] PCI: 0000:00:10.1 reg 20 io port: [e400, e41f] 
 
 

[    0.564156] pci 0000:00:10.1: supports D1 
 
 

[    0.564158] pci 0000:00:10.1: supports D2 
 
 

[    0.564161] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot 
D3cold 
 

[    0.564167] pci 0000:00:10.1: PME# disabled 
 
 

[    0.564211] PCI: 0000:00:10.2 reg 20 io port: [e800, e81f] 
 
 

[    0.564234] pci 0000:00:10.2: supports D1 
 
 

[    0.564236] pci 0000:00:10.2: supports D2 
 
 

[    0.564239] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot 
D3cold 
 

[    0.564244] pci 0000:00:10.2: PME# disabled 
 
 

[    0.564272] PCI: 0000:00:10.3 reg 10 32bit mmio: [dffffb00, dffffbff] 
 
 

[    0.564312] pci 0000:00:10.3: supports D1 
 
 

[    0.564314] pci 0000:00:10.3: supports D2 
 
 

[    0.564317] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot 
D3cold 
 

[    0.564322] pci 0000:00:10.3: PME# disabled 
 
 

[    0.564389] HPET not enabled in BIOS. You might try hpet=force boot 
option 
 

[    0.564398] pci 0000:00:11.0: quirk: region 0800-087f claimed by 
vt8235 PM 
 

[    0.564403] pci 0000:00:11.0: quirk: region 0400-040f claimed by 
vt8235 SMB 
 

[    0.564456] PCI: 0000:00:11.1 reg 20 io port: [fc00, fc0f] 
 
 

[    0.564513] PCI: 0000:00:11.5 reg 10 io port: [dc00, dcff] 
 
 

[    0.564554] pci 0000:00:11.5: supports D1 
 
 

[    0.564557] pci 0000:00:11.5: supports D2 
 
 

[    0.564588] PCI: 0000:00:12.0 reg 10 io port: [d800, d8ff] 
 
 

[    0.564595] PCI: 0000:00:12.0 reg 14 32bit mmio: [dffffa00, dffffaff] 
 
 

[    0.564632] pci 0000:00:12.0: supports D1 
 
 

[    0.564634] pci 0000:00:12.0: supports D2 
 
 

[    0.564637] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot 
D3cold 
 

[    0.564643] pci 0000:00:12.0: PME# disabled 
 
 

[    0.564692] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff] 
 
 

[    0.564699] PCI: 0000:01:00.0 reg 14 io port: [c800, c8ff] 
 
 

[    0.564706] PCI: 0000:01:00.0 reg 18 32bit mmio: [dfef0000, dfefffff] 
 
 

[    0.564723] PCI: 0000:01:00.0 reg 30 32bit mmio: [dfec0000, dfedffff] 
 
 

[    0.564739] pci 0000:01:00.0: supports D1 
 
 

[    0.564741] pci 0000:01:00.0: supports D2 
 
 

[    0.564774] PCI: bridge 0000:00:01.0 io port: [c000, cfff] 
 
 

[    0.564780] PCI: bridge 0000:00:01.0 32bit mmio: [dfe00000, dfefffff] 
 
 

[    0.564785] PCI: bridge 0000:00:01.0 32bit mmio pref: [cfd00000, 
dfcfffff] 
 

[    0.564794] bus 00 -> node 0 
 
 

[    0.564804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] 
 
 

[    0.587640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12 
14 15) 
 

[    0.587836] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12 
14 15) 
 

[    0.588024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12 
14 15) 
 

[    0.588223] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12 
14 15) 
 

[    0.588415] ACPI: Power Resource [URP1] (off) 
 
 

[    0.588474] ACPI: Power Resource [URP2] (off) 
 
 

[    0.588531] ACPI: Power Resource [FDDP] (off) 
 
 

[    0.588588] ACPI: Power Resource [LPTP] (off) 
 
 

[    0.588720] Linux Plug and Play Support v0.97 (c) Adam Belay 
 
 

[    0.588784] pnp: PnP ACPI init 
 
 

[    0.588798] ACPI: bus type pnp registered 
 
 

[    0.594014] pnp: PnP ACPI: found 12 devices 
 
 

[    0.594020] ACPI: ACPI bus type pnp unregistered 
 
 

[    0.594026] PnPBIOS: Disabled by ACPI PNP 
 
 

[    0.594699] PCI: Using ACPI for IRQ routing 
 
 

[    0.594866] NET: Registered protocol family 8 
 
 

[    0.594866] NET: Registered protocol family 20 
 
 

[    0.594866] NetLabel: Initializing 
 
 

[    0.594866] NetLabel:  domain hash size = 128 
 
 

[    0.594866] NetLabel:  protocols = UNLABELED CIPSOv4 
 
 

[    0.594866] NetLabel:  unlabeled traffic allowed by default 
 
 

[    0.594866] tracer: 772 pages allocated for 65536 entries of 48 bytes 
 
 

[    0.594866]    actual entries 65620 
 
 

[    0.594866] AppArmor: AppArmor Filesystem Enabled 
 
 

[    0.594866] ACPI: RTC can wake from S4 
 
 

[    0.594866] system 00:05: ioport range 0x295-0x296 has been reserved 
 
 

[    0.594866] system 00:05: ioport range 0x3f0-0x3f1 has been reserved 
 
 

[    0.594866] system 00:05: ioport range 0x4d0-0x4d1 has been reserved 
 
 

[    0.594866] system 00:05: ioport range 0x400-0x40f has been reserved 
 
 

[    0.594866] system 00:05: ioport range 0x800-0x87f has been reserved 
 
 

[    0.594866] system 00:05: iomem range 0xfec00000-0xfec00fff could not 
be reserved 
 

[    0.594866] system 00:05: iomem range 0xfee00000-0xfee00fff could not 
be reserved 
 

[    0.631476] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01 
 
 

[    0.631483] pci 0000:00:01.0:   IO window: 0xc000-0xcfff 
 
 

[    0.631491] pci 0000:00:01.0:   MEM window: 0xdfe00000-0xdfefffff 
 
 

[    0.631497] pci 0000:00:01.0:   PREFETCH window: 
0x000000cfd00000-0x000000dfcfffff 
 

[    0.631517] pci 0000:00:01.0: setting latency timer to 64 
 
 

[    0.631522] bus: 00 index 0 io port: [0, ffff] 
 
 

[    0.631525] bus: 00 index 1 mmio: [0, ffffffff] 
 
 

[    0.631528] bus: 01 index 0 io port: [c000, cfff] 
 
 

[    0.631532] bus: 01 index 1 mmio: [dfe00000, dfefffff] 
 
 

[    0.631535] bus: 01 index 2 mmio: [cfd00000, dfcfffff] 
 
 

[    0.631538] bus: 01 index 3 mmio: [0, 0] 
 
 

[    0.631559] NET: Registered protocol family 2 
 
 

[    0.631762] IP route cache hash table entries: 32768 (order: 5, 
131072 bytes) 
 

[    0.632329] TCP established hash table entries: 131072 (order: 8, 
1048576 bytes) 
 

[    0.634669] TCP bind hash table entries: 65536 (order: 7, 524288 
bytes) 
 

[    0.635844] TCP: Hash tables configured (established 131072 bind 
65536) 
 

[    0.635851] TCP reno registered 
 
 

[    0.636069] NET: Registered protocol family 1 
 
 

[    0.636271] checking if image is initramfs... it is 
 
 

[    1.132079] Switched to high resolution mode on CPU 0 
 
 

[    1.649587] Freeing initrd memory: 8501k freed 
 
 

[    1.650906] audit: initializing netlink socket (disabled) 
 
 

[    1.650940] type=2000 audit(1238515007.648:1): initialized 
 
 

[    1.658677] highmem bounce pool size: 64 pages 
 
 

[    1.658688] HugeTLB registered 4 MB page size, pre-allocated 0 pages 
 
 

[    1.662525] VFS: Disk quotas dquot_6.5.1 
 
 

[    1.662680] Dquot-cache hash table entries: 1024 (order 0, 4096 
bytes) 
 

[    1.662882] msgmni has been set to 1761 
 
 

[    1.663104] io scheduler noop registered 
 
 

[    1.663108] io scheduler anticipatory registered 
 
 

[    1.663112] io scheduler deadline registered 
 
 

[    1.663129] io scheduler cfq registered (default) 
 
 

[    1.663149] PCI: VIA PCI bridge detected.Disabling DAC. 
 
 

[    1.663234] pci 0000:01:00.0: Boot video device 
 
 

[    1.663772] isapnp: Scanning for PnP cards... 
 
 

[    2.017197] isapnp: No Plug & Play device found 
 
 

[    2.084117] Serial: 8250/16550 driver4 ports, IRQ sharing enabled 
 
 

[    2.084276] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
 
 

[    2.085441] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 
 
 

[    2.088791] brd: module loaded 
 
 

[    2.088924] input: Macintosh mouse button emulation as 
/devices/virtual/input/input0 
 

[    2.089143] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 
0x60,0x64 irq 1,12 
 

[    2.089635] serio: i8042 KBD port at 0x60,0x64 irq 1 
 
 

[    2.089644] serio: i8042 AUX port at 0x60,0x64 irq 12 
 
 

[    2.090290] mice: PS/2 mouse device common for all mice 
 
 

[    2.090531] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0 
 
 

[    2.090576] rtc0: alarms up to one year, y3k 
 
 

[    2.090777] EISA: Probing bus 0 at eisa.0 
 
 

[    2.090819] EISA: Detected 0 cards. 
 
 

[    2.090824] cpuidle: using governor ladder 
 
 

[    2.090828] cpuidle: using governor menu 
 
 

[    2.091620] TCP cubic registered 
 
 

[    2.091666] Using IPI No-Shortcut mode 
 
 

[    2.092103] registered taskstats version 1 
 
 

[    2.092258]   Magic number: 1:792:943 
 
 

[    2.092402] tty ptyye: hash matches 
 
 

[    2.092479] tty tty0: hash matches 
 
 

[    2.092482] tty console: hash matches 
 
 

[    2.092563] rtc_cmos 00:07: setting system clock to 2009-03-31 
15:56:49 UTC (1238515009) 
 

[    2.092568] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found 
 
 

[    2.092572] EDD information not available. 
 
 

[    2.093308] Freeing unused kernel memory: 424k freed 
 
 

[    2.093419] Write protecting the kernel text: 2580k 
 
 

[    2.093470] Write protecting the kernel read-only data: 940k 
 
 

[    2.113590] input: AT Translated Set 2 keyboard as 
/devices/platform/i8042/serio0/input/input1 
 

[    2.436073] fuse init (API version 7.9) 
 
 

[    2.700026] processor ACPI0007:00: registered as cooling_device0 
 
 

[    2.840026] device-mapper: uevent: version 1.0.3 
 
 

[    2.856012] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) 
initialised: dm-devel at redhat.com 
 

[    3.920240] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI 
 
 

[    3.920247] Copyright (c) 1999-2006 Intel Corporation. 
 
 

[    3.920305] e1000 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) -> 
IRQ 17 
 

[    3.920312] e1000 0000:00:0d.0: PCI: Disallowing DAC for device 
 
 

[    4.169100] e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit) 
00:0e:0c:59:c1:a8 
 

[    4.256171] usbcore: registered new interface driver usbfs 
 
 

[    4.256221] usbcore: registered new interface driver hub 
 
 

[    4.276317] No dock devices found. 
 
 

[    4.320114] usbcore: registered new device driver usb 
 
 

[    4.390910] SCSI subsystem initialized 
 
 

[    4.394824] USB Universal Host Controller Interface driver v3.0 
 
 

[    4.400937] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald 
Becker 
 

[    4.438605] libata version 3.00 loaded. 
 
 

[    4.450706] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network 
Connection 
 

[    4.450829] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low) 
-> IRQ 21 
 

[    4.450848] uhci_hcd 0000:00:10.0: UHCI Host Controller 
 
 

[    4.450927] uhci_hcd 0000:00:10.0: new USB bus registered, assigned 
bus number 1 
 

[    4.450974] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000 
 
 

[    4.451266] usb usb1: configuration #1 chosen from 1 choice 
 
 

[    4.451309] hub 1-0:1.0: USB hub found 
 
 

[    4.451326] hub 1-0:1.0: 2 ports detected 
 
 

[    4.656506] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low) 
-> IRQ 21 
 

[    4.656523] uhci_hcd 0000:00:10.1: UHCI Host Controller 
 
 

[    4.656564] uhci_hcd 0000:00:10.1: new USB bus registered, assigned 
bus number 2 
 

[    4.656598] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400 
 
 

[    4.656765] usb usb2: configuration #1 chosen from 1 choice 
 
 

[    4.656816] hub 2-0:1.0: USB hub found 
 
 

[    4.656832] hub 2-0:1.0: 2 ports detected 
 
 

[    4.864497] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low) 
-> IRQ 21 
 

[    4.864516] uhci_hcd 0000:00:10.2: UHCI Host Controller 
 
 

[    4.864560] uhci_hcd 0000:00:10.2: new USB bus registered, assigned 
bus number 3 
 

[    4.864595] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800 
 
 

[    4.864774] usb usb3: configuration #1 chosen from 1 choice 
 
 

[    4.864817] hub 3-0:1.0: USB hub found 
 
 

[    4.864833] hub 3-0:1.0: 2 ports detected 
 
 

[    5.072479] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low) 
-> IRQ 21 
 

[    5.072508] ehci_hcd 0000:00:10.3: EHCI Host Controller 
 
 

[    5.072553] ehci_hcd 0000:00:10.3: new USB bus registered, assigned 
bus number 4 
 

[    5.072624] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffb00 
 
 

[    5.084089] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 
10 Dec 2004 
 

[    5.084399] usb usb4: configuration #1 chosen from 1 choice 
 
 

[    5.084446] hub 4-0:1.0: USB hub found 
 
 

[    5.084467] hub 4-0:1.0: 6 ports detected 
 
 

[    5.189110] pata_acpi 0000:00:11.1: can't derive routing for PCI INT 
A 
 

[    5.189209] pata_acpi 0000:00:11.1: can't derive routing for PCI INT 
A 
 

[    5.190662] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low) 
-> IRQ 23 
 

[    5.191143] eth1: VIA Rhine II at 0xdffffa00, 00:0b:6a:7a:00:18, IRQ 
23. 
 

[    5.191855] eth1: MII PHY found at address 1, status 0x7849 
advertising 05e1 Link 0000. 
 

[    5.198534] pata_via 0000:00:11.1: version 0.3.3 
 
 

[    5.198560] pata_via 0000:00:11.1: can't derive routing for PCI INT A 
 
 

[    5.199255] scsi0 : pata_via 
 
 

[    5.199496] scsi1 : pata_via 
 
 

[    5.202533] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 
irq 14 
 

[    5.202539] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 
irq 15 
 

[    5.364652] ata1.00: ATA-7: Maxtor 2F040J0, VAM51JJ0, max UDMA/133 
 
 

[    5.364660] ata1.00: 80293248 sectors, multi 16: LBA 
 
 

[    5.380527] ata1.00: configured for UDMA/133 
 
 

[    5.544465] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max 
UDMA/33 
 

[    5.560306] ata2.00: configured for UDMA/33 
 
 

[    5.560509] scsi 0:0:0:0: Direct-Access     ATA      Maxtor 2F040J0 
  VAM5 PQ: 0 ANSI: 5 
 

[    5.565160] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GSA-H10N 
  JL10 PQ: 0 ANSI: 5 
 

[    5.632414] scsi 0:0:0:0: Attached scsi generic sg0 type 0 
 
 

[    5.632481] scsi 1:0:0:0: Attached scsi generic sg1 type 5 
 
 

[    5.666525] Driver 'sd' needs updating - please use bus_type methods 
 
 

[    5.669733] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors 
(41110 MB) 
 

[    5.669765] sd 0:0:0:0: [sda] Write Protect is off 
 
 

[    5.669770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 
 
 

[    5.669808] sd 0:0:0:0: [sda] Write cache: disabled, read cache: 
enabled, doesn't support DPO or FUA 
 

[    5.669949] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors 
(41110 MB) 
 

[    5.669971] sd 0:0:0:0: [sda] Write Protect is off 
 
 

[    5.669975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 
 
 

[    5.670012] sd 0:0:0:0: [sda] Write cache: disabled, read cache: 
enabled, doesn't support DPO or FUA 
 

[    5.670019]  sda:<4>Driver 'sr' needs updating - please use bus_type 
methods 
 

[    5.686103]  sda1 sda2 < sda5 > 
 
 

[    5.722382] sd 0:0:0:0: [sda] Attached SCSI disk 
 
 

[    5.739587] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw 
xa/form2 cdda tray 
 

[    5.739597] Uniform CD-ROM driver Revision: 3.20 
 
 

[    5.739779] sr 1:0:0:0: Attached scsi CD-ROM sr0 
 
 

[    6.061547] PM: Starting manual resume from disk 
 
 

[    6.061554] PM: Resume from partition 8:5 
 
 

[    6.061557] PM: Checking hibernation image. 
 
 

[    6.061930] PM: Resume from disk failed. 
 
 

[    6.147351] kjournald starting.  Commit interval 5 seconds 
 
 

[    6.147380] EXT3-fs: mounted filesystem with ordered data mode. 
 
 

[   14.250854] udevd version 124 started 
 
 

[   15.900290] Linux agpgart interface v0.103 
 
 

[   16.117516] agpgart: Detected VIA KT400/KT400A/KT600 chipset 
 
 

[   16.138851] agpgart-via 0000:00:00.0: AGP aperture is 64M @ 
0xe0000000 
 

[   16.373455] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 
 
 

[   16.403194] shpchp: Standard Hot Plug PCI Controller Driver version: 
0.4 
 

[   16.521216] input: Power Button (FF) as 
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2 
 

[   16.536066] ACPI: Power Button (FF) [PWRF] 
 
 

[   16.536234] input: Power Button (CM) as 
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3 
 

[   16.552036] ACPI: Power Button (CM) [PWRB] 
 
 

[   16.552221] input: Sleep Button (CM) as 
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4 
 

[   16.564060] ACPI: Sleep Button (CM) [SLPB] 
 
 

[   16.900291] irda_init() 
 
 

[   16.900319] NET: Registered protocol family 23 
 
 

[   16.975494] input: PC Speaker as 
/devices/platform/pcspkr/input/input5 
 

[   16.989711] Linux video capture interface: v2.00 
 
 

[   17.483283] parport_pc 00:03: reported by Plug and Play ACPI 
 
 

[   17.483379] parport0: PC-style at 0x378 (0x778), irq 7, dma 0 
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA] 
 

[   17.540350] saa7130/34: v4l2 driver version 0.2.14 loaded 
 
 

[   17.549875] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) -> 
IRQ 18 
 

[   17.549887] saa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 18, 
latency: 32, mmio: 0xdffffc00 
 

[   17.549898] saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy 
400 TV [card=8,autodetected] 
 

[   17.549916] saa7134[0]: board init: gpio is 50000 
 
 

[   17.553558] input: saa7134 IR (Terratec Cinergy 40 as 
/devices/pci0000:00/0000:00:0a.0/input/input6 
 

[   17.716471] saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716486] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716498] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716509] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716521] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716532] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716543] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716554] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716565] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716576] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716587] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716598] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716610] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716621] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716632] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   17.716643] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff 
ff ff ff ff ff ff 
 

[   18.144038] All bytes are equal. It is not a TEA5767 
 
 

[   18.144166] tuner' 1-0060: chip found @ 0xc0 (saa7134[0]) 
 
 

[   18.396049] tuner-simple 1-0060: creating new instance 
 
 

[   18.396058] tuner-simple 1-0060: type set to 5 (Philips PAL_BG 
(FI1216 and compatibles)) 
 

[   18.464287] saa7134[0]: registered device video0 [v4l2] 
 
 

[   18.464348] saa7134[0]: registered device vbi0 
 
 

[   18.924193] saa7134 ALSA driver for DMA sound loaded 
 
 

[   18.925191] saa7134[0]/alsa: saa7134[0] at 0xdffffc00 irq 18 
registered as card -2 
 

[   19.072363] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level, 
low) -> IRQ 22 
 

[   19.072524] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64 
 
 

[   19.269955] input: ImExPS/2 Generic Explorer Mouse as 
/devices/platform/i8042/serio1/input/input7 
 

[   23.101081] lp0: using parport0 (interrupt-driven).
[   23.371687] Adding 1694816k swap on /dev/sda5.  Priority:-1 extents:1 
across:1694816k
[   24.043021] EXT3 FS on sda1, internal journal
[   25.486256] type=1505 audit(1238515032.564:2): 
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" 
name2="default" pid=3887
[   25.818019] type=1505 audit(1238515032.896:3): 
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" 
name2="default" pid=3892
[   25.818539] type=1505 audit(1238515032.896:4): 
operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3892
[   25.892472] type=1505 audit(1238515032.972:5): 
operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3896
[   25.970937] type=1505 audit(1238515033.048:6): 
operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default" 
pid=3900
[   26.223674] ip_tables: (C) 2000-2006 Netfilter Core Team
[   27.705844] ACPI: WMI: Mapper loaded
[   29.126694] warning: `avahi-daemon' uses 32-bit capabilities (legacy 
support in use)
[   32.164097] apm: BIOS not found.
[   32.808987] ppdev: user-space parallel port driver
[   35.608051] NET: Registered protocol family 10
[   35.611073] lo: Disabled Privacy Extensions
[   40.891758] Bluetooth: Core ver 2.13
[   40.894807] NET: Registered protocol family 31
[   40.894816] Bluetooth: HCI device and connection manager initialized
[   40.894822] Bluetooth: HCI socket layer initialized
[   40.923921] Bluetooth: L2CAP ver 2.11
[   40.923937] Bluetooth: L2CAP socket layer initialized
[   40.941035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   40.941045] Bluetooth: BNEP filters: protocol multicast
[   41.015379] Bridge firewalling registered
[   41.050423] Bluetooth: SCO (Voice Link) ver 0.6
[   41.050432] Bluetooth: SCO socket layer initialized
[   41.067221] Bluetooth: RFCOMM socket layer initialized
[   41.068185] Bluetooth: RFCOMM TTY layer initialized
[   41.068193] Bluetooth: RFCOMM ver 1.10
[   43.859092] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   44.360563] [drm] Initialized drm 1.1.0 20060810
[   44.602259] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[   44.961620] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[   44.961647] agpgart-via 0000:00:00.0: bridge is in legacy mode, 
falling back to 2.x
[   44.961656] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[   44.961728] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[   45.216860] eth1: link down
[   45.217793] ADDRCONF(NETDEV_UP): eth1: link is not ready
[   45.222773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   45.224419] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps 
Full Duplex, Flow Control: RX/TX
[   45.225015] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[   45.536719] [drm] Setting GART location based on new memory map
[   45.536737] [drm] Loading R100 Microcode
[   45.536783] [drm] writeback test succeeded in 1 usecs
[   45.820138] NET: Registered protocol family 17
[   56.072012] eth0: no IPv6 routers present
[  227.616311] ppdev0: registered pardevice
[  227.664473] ppdev0: unregistered pardevice
[  228.688894] ppdev0: registered pardevice
[  228.737268] ppdev0: unregistered pardevice
[  229.944248] ppdev0: registered pardevice
[  229.992063] ppdev0: unregistered pardevice