DVD wird nicht erkannt
Ralf Lehmeier
r.lehmeier at freenet.de
Die Mar 31 18:28:40 BST 2009
Nils Kassube schrieb:
> Ralf Lehmeier wrote:
>> Hallo!
>> Ich setze Ubuntu 8.10 ein und möchte damit auch gerne Filme
>> anschauen. Nun habe ich das Problem das mein DVD-Laufwerk ( IDE )
>> nicht als DVD-Laufwerk erkannt wird. Zwar werden Cd´s erkannt aber
>> leider keine DVD´s. Auch Daten-DVD´s werden nicht erkannt.
>
> Was kommt denn als Ausgabe bei diesen Befehlen?
>
> ls /dev/dvd*
> sudo lshw -C disk
>
Ist eine ganze Menge was da kam. Hoffentlich enthält es die Lösung.
Sudo lshw -class disk
0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.27-11-generic (buildd at rothera) (gcc
version 4.3.2 (Ubuntu 4.3.2-1ubuntu11) ) #1 SMP Thu Jan 29 19:24:39 UTC
2009 (Ubuntu 2.6.27-11.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000
(reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000
(reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
[ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fff8000 (ACPI
data)
[ 0.000000] BIOS-e820: 000000003fff8000 - 0000000040000000 (ACPI
NVS)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000
(reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000
(reserved)
[ 0.000000] DMI 2.3 present.
[ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it
around.
[ 0.000000] last_pfn = 0x3fff0 max_arch_pfn = 0x100000
[ 0.000000] kernel direct mapping tables up to 38000000 @ 10000-15000
[ 0.000000] RAMDISK: 377a2000 - 37fef4c9
[ 0.000000] ACPI: RSDP 000FA910, 0014 (r0 AMI )
[ 0.000000] ACPI: RSDT 3FFF0000, 002C (r1 AMIINT VIA_K7 10
MSFT 97)
[ 0.000000] ACPI: FACP 3FFF0030, 0081 (r1 AMIINT VIA_K7 11
MSFT 97)
[ 0.000000] ACPI: DSDT 3FFF0120, 3252 (r1 VIA K7VT4 1000
MSFT 100000D)
[ 0.000000] ACPI: FACS 3FFF8000, 0040
[ 0.000000] ACPI: APIC 3FFF00C0, 0054 (r1 AMIINT VIA_K7 9
MSFT 97)
[ 0.000000] 127MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 38000000
[ 0.000000] low ram: 00000000 - 38000000
[ 0.000000] bootmap 00011000 - 00018000
[ 0.000000] (9 early reservations) ==> bootmem [0000000000 -
0038000000]
[ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==>
[0000000000 - 0000001000]
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==>
[0000001000 - 0000002000]
[ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==>
[0000006000 - 0000007000]
[ 0.000000] #3 [0000100000 - 00005c29e0] TEXT DATA BSS ==>
[0000100000 - 00005c29e0]
[ 0.000000] #4 [00377a2000 - 0037fef4c9] RAMDISK ==>
[00377a2000 - 0037fef4c9]
[ 0.000000] #5 [00005c3000 - 00005c6000] INIT_PG_TABLE ==>
[00005c3000 - 00005c6000]
[ 0.000000] #6 [000009fc00 - 0000100000] BIOS reserved ==>
[000009fc00 - 0000100000]
[ 0.000000] #7 [0000010000 - 0000011000] PGTABLE ==>
[0000010000 - 0000011000]
[ 0.000000] #8 [0000011000 - 0000018000] BOOTMAP ==>
[0000011000 - 0000018000]
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00038000
[ 0.000000] HighMem 0x00038000 -> 0x0003fff0
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0003fff0
[ 0.000000] On node 0 totalpages: 262015
[ 0.000000] free_area_init_node: node 0, pgdat c048c680, node_mem_map
c1000240
[ 0.000000] DMA zone: 3947 pages, LIFO batch:0
[ 0.000000] Normal zone: 223300 pages, LIFO batch:31
[ 0.000000] HighMem zone: 32464 pages, LIFO batch:7
[ 0.000000] ACPI: PM-Timer IO Port: 0x808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low
level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] SMP: Allowing 1 CPUs, 0 hotplug CPUs
[ 0.000000] mapped APIC to ffffb000 (fee00000)
[ 0.000000] mapped IOAPIC to ffffa000 (fec00000)
[ 0.000000] PM: Registered nosave memory: 000000000009f000 -
00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 -
00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 -
0000000000100000
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bec00000)
[ 0.000000] PERCPU: Allocating 41628 bytes of per cpu data
[ 0.000000] NR_CPUS: 64, nr_cpu_ids: 1, nr_node_ids 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 259711
[ 0.000000] Kernel command line:
root=UUID=eceb711c-2599-4ddc-9055-6176decf6ce8 ro quiet splash
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 0.000000] TSC: PIT calibration confirmed by PMTIMER.
[ 0.000000] TSC: using PMTIMER calibration value
[ 0.000000] Detected 1531.828 MHz processor.
[ 0.004000] Console: colour VGA+ 80x25
[ 0.004000] console [tty0] enabled
[ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 0.004000] Memory: 1024296k/1048512k available (2576k kernel code,
23480k reserved, 1165k data, 424k init, 131008k highmem)
[ 0.004000] virtual kernel memory layout:
[ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB)
[ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB)
[ 0.004000] vmalloc : 0xf8800000 - 0xff3fe000 ( 107 MB)
[ 0.004000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 0.004000] .init : 0xc04ad000 - 0xc0517000 ( 424 kB)
[ 0.004000] .data : 0xc03840da - 0xc04a7680 (1165 kB)
[ 0.004000] .text : 0xc0100000 - 0xc03840da (2576 kB)
[ 0.004000] Checking if this processor honours the WP bit even in
supervisor mode...Ok.
[ 0.004000] CPA: page pool initialized 1 of 1 pages preallocated
[ 0.004000] SLUB: Genslabs=12, HWalign=32, Order=0-3, MinObjects=0,
CPUs=1, Nodes=1
[ 0.004021] Calibrating delay loop (skipped), value calculated using
timer frequency.. 3063.65 BogoMIPS (lpj=6127312)
[ 0.004059] Security Framework initialized
[ 0.004073] SELinux: Disabled at boot.
[ 0.004119] AppArmor: AppArmor initialized
[ 0.004134] Mount-cache hash table entries: 512
[ 0.004423] Initializing cgroup subsys ns
[ 0.004430] Initializing cgroup subsys cpuacct
[ 0.004434] Initializing cgroup subsys memory
[ 0.004458] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64
bytes/line)
[ 0.004462] CPU: L2 Cache: 256K (64 bytes/line)
[ 0.004487] Checking 'hlt' instruction... OK.
[ 0.020452] SMP alternatives: switching to UP code
[ 0.027761] Freeing SMP alternatives: 11k freed
[ 0.027769] ACPI: Core revision 20080609
[ 0.029840] ACPI: Checking initramfs for custom DSDT
[ 0.488664] ENABLING IO-APIC IRQs
[ 0.488986] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.528693] CPU0: AMD Athlon(tm) XP 1800+ stepping 02
[ 0.532031] Brought up 1 CPUs
[ 0.532031] Total of 1 processors activated (3063.65 BogoMIPS).
[ 0.532031] CPU0 attaching NULL sched-domain.
[ 0.532031] net_namespace: 840 bytes
[ 0.532031] Booting paravirtualized kernel on bare hardware
[ 0.532031] Time: 15:56:47 Date: 03/31/09
[ 0.532031] NET: Registered protocol family 16
[ 0.532031] EISA bus registered
[ 0.532031] ACPI: bus type pci registered
[ 0.544834] PCI: PCI BIOS revision 2.10 entry at 0xfdae1, last bus=1
[ 0.544839] PCI: Using configuration type 1 for base access
[ 0.547212] ACPI: EC: Look up EC in DSDT
[ 0.555681] ACPI: Interpreter enabled
[ 0.555688] ACPI: (supports S0 S1 S4 S5)
[ 0.555710] ACPI: Using IOAPIC for interrupt routing
[ 0.563583] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.563716] PCI: 0000:00:00.0 reg 10 32bit mmio: [e0000000, e3ffffff]
[ 0.563797] pci 0000:00:01.0: supports D1
[ 0.563838] PCI: 0000:00:0a.0 reg 10 32bit mmio: [dffffc00, dfffffff]
[ 0.563878] pci 0000:00:0a.0: supports D1
[ 0.563881] pci 0000:00:0a.0: supports D2
[ 0.563924] PCI: 0000:00:0d.0 reg 10 32bit mmio: [dffc0000, dffdffff]
[ 0.563932] PCI: 0000:00:0d.0 reg 14 32bit mmio: [dffa0000, dffbffff]
[ 0.563940] PCI: 0000:00:0d.0 reg 18 io port: [ec00, ec1f]
[ 0.563961] PCI: 0000:00:0d.0 reg 30 32bit mmio: [fffe0000, ffffffff]
[ 0.563983] pci 0000:00:0d.0: PME# supported from D0 D3hot D3cold
[ 0.563989] pci 0000:00:0d.0: PME# disabled
[ 0.564053] PCI: 0000:00:10.0 reg 20 io port: [e000, e01f]
[ 0.564076] pci 0000:00:10.0: supports D1
[ 0.564079] pci 0000:00:10.0: supports D2
[ 0.564082] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.564088] pci 0000:00:10.0: PME# disabled
[ 0.564133] PCI: 0000:00:10.1 reg 20 io port: [e400, e41f]
[ 0.564156] pci 0000:00:10.1: supports D1
[ 0.564158] pci 0000:00:10.1: supports D2
[ 0.564161] pci 0000:00:10.1: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.564167] pci 0000:00:10.1: PME# disabled
[ 0.564211] PCI: 0000:00:10.2 reg 20 io port: [e800, e81f]
[ 0.564234] pci 0000:00:10.2: supports D1
[ 0.564236] pci 0000:00:10.2: supports D2
[ 0.564239] pci 0000:00:10.2: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.564244] pci 0000:00:10.2: PME# disabled
[ 0.564272] PCI: 0000:00:10.3 reg 10 32bit mmio: [dffffb00, dffffbff]
[ 0.564312] pci 0000:00:10.3: supports D1
[ 0.564314] pci 0000:00:10.3: supports D2
[ 0.564317] pci 0000:00:10.3: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.564322] pci 0000:00:10.3: PME# disabled
[ 0.564389] HPET not enabled in BIOS. You might try hpet=force boot
option
[ 0.564398] pci 0000:00:11.0: quirk: region 0800-087f claimed by
vt8235 PM
[ 0.564403] pci 0000:00:11.0: quirk: region 0400-040f claimed by
vt8235 SMB
[ 0.564456] PCI: 0000:00:11.1 reg 20 io port: [fc00, fc0f]
[ 0.564513] PCI: 0000:00:11.5 reg 10 io port: [dc00, dcff]
[ 0.564554] pci 0000:00:11.5: supports D1
[ 0.564557] pci 0000:00:11.5: supports D2
[ 0.564588] PCI: 0000:00:12.0 reg 10 io port: [d800, d8ff]
[ 0.564595] PCI: 0000:00:12.0 reg 14 32bit mmio: [dffffa00, dffffaff]
[ 0.564632] pci 0000:00:12.0: supports D1
[ 0.564634] pci 0000:00:12.0: supports D2
[ 0.564637] pci 0000:00:12.0: PME# supported from D0 D1 D2 D3hot
D3cold
[ 0.564643] pci 0000:00:12.0: PME# disabled
[ 0.564692] PCI: 0000:01:00.0 reg 10 32bit mmio: [d0000000, d7ffffff]
[ 0.564699] PCI: 0000:01:00.0 reg 14 io port: [c800, c8ff]
[ 0.564706] PCI: 0000:01:00.0 reg 18 32bit mmio: [dfef0000, dfefffff]
[ 0.564723] PCI: 0000:01:00.0 reg 30 32bit mmio: [dfec0000, dfedffff]
[ 0.564739] pci 0000:01:00.0: supports D1
[ 0.564741] pci 0000:01:00.0: supports D2
[ 0.564774] PCI: bridge 0000:00:01.0 io port: [c000, cfff]
[ 0.564780] PCI: bridge 0000:00:01.0 32bit mmio: [dfe00000, dfefffff]
[ 0.564785] PCI: bridge 0000:00:01.0 32bit mmio pref: [cfd00000,
dfcfffff]
[ 0.564794] bus 00 -> node 0
[ 0.564804] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.587640] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 10 *11 12
14 15)
[ 0.587836] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 7 10 11 12
14 15)
[ 0.588024] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 *10 11 12
14 15)
[ 0.588223] ACPI: PCI Interrupt Link [LNKD] (IRQs *3 4 5 7 10 11 12
14 15)
[ 0.588415] ACPI: Power Resource [URP1] (off)
[ 0.588474] ACPI: Power Resource [URP2] (off)
[ 0.588531] ACPI: Power Resource [FDDP] (off)
[ 0.588588] ACPI: Power Resource [LPTP] (off)
[ 0.588720] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.588784] pnp: PnP ACPI init
[ 0.588798] ACPI: bus type pnp registered
[ 0.594014] pnp: PnP ACPI: found 12 devices
[ 0.594020] ACPI: ACPI bus type pnp unregistered
[ 0.594026] PnPBIOS: Disabled by ACPI PNP
[ 0.594699] PCI: Using ACPI for IRQ routing
[ 0.594866] NET: Registered protocol family 8
[ 0.594866] NET: Registered protocol family 20
[ 0.594866] NetLabel: Initializing
[ 0.594866] NetLabel: domain hash size = 128
[ 0.594866] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.594866] NetLabel: unlabeled traffic allowed by default
[ 0.594866] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 0.594866] actual entries 65620
[ 0.594866] AppArmor: AppArmor Filesystem Enabled
[ 0.594866] ACPI: RTC can wake from S4
[ 0.594866] system 00:05: ioport range 0x295-0x296 has been reserved
[ 0.594866] system 00:05: ioport range 0x3f0-0x3f1 has been reserved
[ 0.594866] system 00:05: ioport range 0x4d0-0x4d1 has been reserved
[ 0.594866] system 00:05: ioport range 0x400-0x40f has been reserved
[ 0.594866] system 00:05: ioport range 0x800-0x87f has been reserved
[ 0.594866] system 00:05: iomem range 0xfec00000-0xfec00fff could not
be reserved
[ 0.594866] system 00:05: iomem range 0xfee00000-0xfee00fff could not
be reserved
[ 0.631476] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 0.631483] pci 0000:00:01.0: IO window: 0xc000-0xcfff
[ 0.631491] pci 0000:00:01.0: MEM window: 0xdfe00000-0xdfefffff
[ 0.631497] pci 0000:00:01.0: PREFETCH window:
0x000000cfd00000-0x000000dfcfffff
[ 0.631517] pci 0000:00:01.0: setting latency timer to 64
[ 0.631522] bus: 00 index 0 io port: [0, ffff]
[ 0.631525] bus: 00 index 1 mmio: [0, ffffffff]
[ 0.631528] bus: 01 index 0 io port: [c000, cfff]
[ 0.631532] bus: 01 index 1 mmio: [dfe00000, dfefffff]
[ 0.631535] bus: 01 index 2 mmio: [cfd00000, dfcfffff]
[ 0.631538] bus: 01 index 3 mmio: [0, 0]
[ 0.631559] NET: Registered protocol family 2
[ 0.631762] IP route cache hash table entries: 32768 (order: 5,
131072 bytes)
[ 0.632329] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 0.634669] TCP bind hash table entries: 65536 (order: 7, 524288
bytes)
[ 0.635844] TCP: Hash tables configured (established 131072 bind
65536)
[ 0.635851] TCP reno registered
[ 0.636069] NET: Registered protocol family 1
[ 0.636271] checking if image is initramfs... it is
[ 1.132079] Switched to high resolution mode on CPU 0
[ 1.649587] Freeing initrd memory: 8501k freed
[ 1.650906] audit: initializing netlink socket (disabled)
[ 1.650940] type=2000 audit(1238515007.648:1): initialized
[ 1.658677] highmem bounce pool size: 64 pages
[ 1.658688] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 1.662525] VFS: Disk quotas dquot_6.5.1
[ 1.662680] Dquot-cache hash table entries: 1024 (order 0, 4096
bytes)
[ 1.662882] msgmni has been set to 1761
[ 1.663104] io scheduler noop registered
[ 1.663108] io scheduler anticipatory registered
[ 1.663112] io scheduler deadline registered
[ 1.663129] io scheduler cfq registered (default)
[ 1.663149] PCI: VIA PCI bridge detected.Disabling DAC.
[ 1.663234] pci 0000:01:00.0: Boot video device
[ 1.663772] isapnp: Scanning for PnP cards...
[ 2.017197] isapnp: No Plug & Play device found
[ 2.084117] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 2.084276] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.085441] 00:02: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 2.088791] brd: module loaded
[ 2.088924] input: Macintosh mouse button emulation as
/devices/virtual/input/input0
[ 2.089143] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at
0x60,0x64 irq 1,12
[ 2.089635] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 2.089644] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 2.090290] mice: PS/2 mouse device common for all mice
[ 2.090531] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 2.090576] rtc0: alarms up to one year, y3k
[ 2.090777] EISA: Probing bus 0 at eisa.0
[ 2.090819] EISA: Detected 0 cards.
[ 2.090824] cpuidle: using governor ladder
[ 2.090828] cpuidle: using governor menu
[ 2.091620] TCP cubic registered
[ 2.091666] Using IPI No-Shortcut mode
[ 2.092103] registered taskstats version 1
[ 2.092258] Magic number: 1:792:943
[ 2.092402] tty ptyye: hash matches
[ 2.092479] tty tty0: hash matches
[ 2.092482] tty console: hash matches
[ 2.092563] rtc_cmos 00:07: setting system clock to 2009-03-31
15:56:49 UTC (1238515009)
[ 2.092568] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 2.092572] EDD information not available.
[ 2.093308] Freeing unused kernel memory: 424k freed
[ 2.093419] Write protecting the kernel text: 2580k
[ 2.093470] Write protecting the kernel read-only data: 940k
[ 2.113590] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input1
[ 2.436073] fuse init (API version 7.9)
[ 2.700026] processor ACPI0007:00: registered as cooling_device0
[ 2.840026] device-mapper: uevent: version 1.0.3
[ 2.856012] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23)
initialised: dm-devel at redhat.com
[ 3.920240] Intel(R) PRO/1000 Network Driver - version 7.3.20-k3-NAPI
[ 3.920247] Copyright (c) 1999-2006 Intel Corporation.
[ 3.920305] e1000 0000:00:0d.0: PCI INT A -> GSI 17 (level, low) ->
IRQ 17
[ 3.920312] e1000 0000:00:0d.0: PCI: Disallowing DAC for device
[ 4.169100] e1000: 0000:00:0d.0: e1000_probe: (PCI:33MHz:32-bit)
00:0e:0c:59:c1:a8
[ 4.256171] usbcore: registered new interface driver usbfs
[ 4.256221] usbcore: registered new interface driver hub
[ 4.276317] No dock devices found.
[ 4.320114] usbcore: registered new device driver usb
[ 4.390910] SCSI subsystem initialized
[ 4.394824] USB Universal Host Controller Interface driver v3.0
[ 4.400937] via-rhine.c:v1.10-LK1.4.3 2007-03-06 Written by Donald
Becker
[ 4.438605] libata version 3.00 loaded.
[ 4.450706] e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network
Connection
[ 4.450829] uhci_hcd 0000:00:10.0: PCI INT A -> GSI 21 (level, low)
-> IRQ 21
[ 4.450848] uhci_hcd 0000:00:10.0: UHCI Host Controller
[ 4.450927] uhci_hcd 0000:00:10.0: new USB bus registered, assigned
bus number 1
[ 4.450974] uhci_hcd 0000:00:10.0: irq 21, io base 0x0000e000
[ 4.451266] usb usb1: configuration #1 chosen from 1 choice
[ 4.451309] hub 1-0:1.0: USB hub found
[ 4.451326] hub 1-0:1.0: 2 ports detected
[ 4.656506] uhci_hcd 0000:00:10.1: PCI INT B -> GSI 21 (level, low)
-> IRQ 21
[ 4.656523] uhci_hcd 0000:00:10.1: UHCI Host Controller
[ 4.656564] uhci_hcd 0000:00:10.1: new USB bus registered, assigned
bus number 2
[ 4.656598] uhci_hcd 0000:00:10.1: irq 21, io base 0x0000e400
[ 4.656765] usb usb2: configuration #1 chosen from 1 choice
[ 4.656816] hub 2-0:1.0: USB hub found
[ 4.656832] hub 2-0:1.0: 2 ports detected
[ 4.864497] uhci_hcd 0000:00:10.2: PCI INT C -> GSI 21 (level, low)
-> IRQ 21
[ 4.864516] uhci_hcd 0000:00:10.2: UHCI Host Controller
[ 4.864560] uhci_hcd 0000:00:10.2: new USB bus registered, assigned
bus number 3
[ 4.864595] uhci_hcd 0000:00:10.2: irq 21, io base 0x0000e800
[ 4.864774] usb usb3: configuration #1 chosen from 1 choice
[ 4.864817] hub 3-0:1.0: USB hub found
[ 4.864833] hub 3-0:1.0: 2 ports detected
[ 5.072479] ehci_hcd 0000:00:10.3: PCI INT D -> GSI 21 (level, low)
-> IRQ 21
[ 5.072508] ehci_hcd 0000:00:10.3: EHCI Host Controller
[ 5.072553] ehci_hcd 0000:00:10.3: new USB bus registered, assigned
bus number 4
[ 5.072624] ehci_hcd 0000:00:10.3: irq 21, io mem 0xdffffb00
[ 5.084089] ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 5.084399] usb usb4: configuration #1 chosen from 1 choice
[ 5.084446] hub 4-0:1.0: USB hub found
[ 5.084467] hub 4-0:1.0: 6 ports detected
[ 5.189110] pata_acpi 0000:00:11.1: can't derive routing for PCI INT
A
[ 5.189209] pata_acpi 0000:00:11.1: can't derive routing for PCI INT
A
[ 5.190662] via-rhine 0000:00:12.0: PCI INT A -> GSI 23 (level, low)
-> IRQ 23
[ 5.191143] eth1: VIA Rhine II at 0xdffffa00, 00:0b:6a:7a:00:18, IRQ
23.
[ 5.191855] eth1: MII PHY found at address 1, status 0x7849
advertising 05e1 Link 0000.
[ 5.198534] pata_via 0000:00:11.1: version 0.3.3
[ 5.198560] pata_via 0000:00:11.1: can't derive routing for PCI INT A
[ 5.199255] scsi0 : pata_via
[ 5.199496] scsi1 : pata_via
[ 5.202533] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00
irq 14
[ 5.202539] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08
irq 15
[ 5.364652] ata1.00: ATA-7: Maxtor 2F040J0, VAM51JJ0, max UDMA/133
[ 5.364660] ata1.00: 80293248 sectors, multi 16: LBA
[ 5.380527] ata1.00: configured for UDMA/133
[ 5.544465] ata2.00: ATAPI: HL-DT-ST DVDRAM GSA-H10N, JL10, max
UDMA/33
[ 5.560306] ata2.00: configured for UDMA/33
[ 5.560509] scsi 0:0:0:0: Direct-Access ATA Maxtor 2F040J0
VAM5 PQ: 0 ANSI: 5
[ 5.565160] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10N
JL10 PQ: 0 ANSI: 5
[ 5.632414] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.632481] scsi 1:0:0:0: Attached scsi generic sg1 type 5
[ 5.666525] Driver 'sd' needs updating - please use bus_type methods
[ 5.669733] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors
(41110 MB)
[ 5.669765] sd 0:0:0:0: [sda] Write Protect is off
[ 5.669770] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.669808] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.669949] sd 0:0:0:0: [sda] 80293248 512-byte hardware sectors
(41110 MB)
[ 5.669971] sd 0:0:0:0: [sda] Write Protect is off
[ 5.669975] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 5.670012] sd 0:0:0:0: [sda] Write cache: disabled, read cache:
enabled, doesn't support DPO or FUA
[ 5.670019] sda:<4>Driver 'sr' needs updating - please use bus_type
methods
[ 5.686103] sda1 sda2 < sda5 >
[ 5.722382] sd 0:0:0:0: [sda] Attached SCSI disk
[ 5.739587] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw
xa/form2 cdda tray
[ 5.739597] Uniform CD-ROM driver Revision: 3.20
[ 5.739779] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 6.061547] PM: Starting manual resume from disk
[ 6.061554] PM: Resume from partition 8:5
[ 6.061557] PM: Checking hibernation image.
[ 6.061930] PM: Resume from disk failed.
[ 6.147351] kjournald starting. Commit interval 5 seconds
[ 6.147380] EXT3-fs: mounted filesystem with ordered data mode.
[ 14.250854] udevd version 124 started
[ 15.900290] Linux agpgart interface v0.103
[ 16.117516] agpgart: Detected VIA KT400/KT400A/KT600 chipset
[ 16.138851] agpgart-via 0000:00:00.0: AGP aperture is 64M @
0xe0000000
[ 16.373455] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 16.403194] shpchp: Standard Hot Plug PCI Controller Driver version:
0.4
[ 16.521216] input: Power Button (FF) as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 16.536066] ACPI: Power Button (FF) [PWRF]
[ 16.536234] input: Power Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 16.552036] ACPI: Power Button (CM) [PWRB]
[ 16.552221] input: Sleep Button (CM) as
/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input4
[ 16.564060] ACPI: Sleep Button (CM) [SLPB]
[ 16.900291] irda_init()
[ 16.900319] NET: Registered protocol family 23
[ 16.975494] input: PC Speaker as
/devices/platform/pcspkr/input/input5
[ 16.989711] Linux video capture interface: v2.00
[ 17.483283] parport_pc 00:03: reported by Plug and Play ACPI
[ 17.483379] parport0: PC-style at 0x378 (0x778), irq 7, dma 0
[PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
[ 17.540350] saa7130/34: v4l2 driver version 0.2.14 loaded
[ 17.549875] saa7134 0000:00:0a.0: PCI INT A -> GSI 18 (level, low) ->
IRQ 18
[ 17.549887] saa7134[0]: found at 0000:00:0a.0, rev: 1, irq: 18,
latency: 32, mmio: 0xdffffc00
[ 17.549898] saa7134[0]: subsystem: 153b:1142, board: Terratec Cinergy
400 TV [card=8,autodetected]
[ 17.549916] saa7134[0]: board init: gpio is 50000
[ 17.553558] input: saa7134 IR (Terratec Cinergy 40 as
/devices/pci0000:00/0000:00:0a.0/input/input6
[ 17.716471] saa7134[0]: i2c eeprom 00: 3b 15 42 11 ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716486] saa7134[0]: i2c eeprom 10: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716498] saa7134[0]: i2c eeprom 20: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716509] saa7134[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716521] saa7134[0]: i2c eeprom 40: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716532] saa7134[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716543] saa7134[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716554] saa7134[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716565] saa7134[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716576] saa7134[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716587] saa7134[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716598] saa7134[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716610] saa7134[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716621] saa7134[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716632] saa7134[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 17.716643] saa7134[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff
ff ff ff ff ff ff
[ 18.144038] All bytes are equal. It is not a TEA5767
[ 18.144166] tuner' 1-0060: chip found @ 0xc0 (saa7134[0])
[ 18.396049] tuner-simple 1-0060: creating new instance
[ 18.396058] tuner-simple 1-0060: type set to 5 (Philips PAL_BG
(FI1216 and compatibles))
[ 18.464287] saa7134[0]: registered device video0 [v4l2]
[ 18.464348] saa7134[0]: registered device vbi0
[ 18.924193] saa7134 ALSA driver for DMA sound loaded
[ 18.925191] saa7134[0]/alsa: saa7134[0] at 0xdffffc00 irq 18
registered as card -2
[ 19.072363] VIA 82xx Audio 0000:00:11.5: PCI INT C -> GSI 22 (level,
low) -> IRQ 22
[ 19.072524] VIA 82xx Audio 0000:00:11.5: setting latency timer to 64
[ 19.269955] input: ImExPS/2 Generic Explorer Mouse as
/devices/platform/i8042/serio1/input/input7
[ 23.101081] lp0: using parport0 (interrupt-driven).
[ 23.371687] Adding 1694816k swap on /dev/sda5. Priority:-1 extents:1
across:1694816k
[ 24.043021] EXT3 FS on sda1, internal journal
[ 25.486256] type=1505 audit(1238515032.564:2):
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
name2="default" pid=3887
[ 25.818019] type=1505 audit(1238515032.896:3):
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf"
name2="default" pid=3892
[ 25.818539] type=1505 audit(1238515032.896:4):
operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=3892
[ 25.892472] type=1505 audit(1238515032.972:5):
operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=3896
[ 25.970937] type=1505 audit(1238515033.048:6):
operation="profile_load" name="/usr/sbin/mysqld-akonadi" name2="default"
pid=3900
[ 26.223674] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 27.705844] ACPI: WMI: Mapper loaded
[ 29.126694] warning: `avahi-daemon' uses 32-bit capabilities (legacy
support in use)
[ 32.164097] apm: BIOS not found.
[ 32.808987] ppdev: user-space parallel port driver
[ 35.608051] NET: Registered protocol family 10
[ 35.611073] lo: Disabled Privacy Extensions
[ 40.891758] Bluetooth: Core ver 2.13
[ 40.894807] NET: Registered protocol family 31
[ 40.894816] Bluetooth: HCI device and connection manager initialized
[ 40.894822] Bluetooth: HCI socket layer initialized
[ 40.923921] Bluetooth: L2CAP ver 2.11
[ 40.923937] Bluetooth: L2CAP socket layer initialized
[ 40.941035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 40.941045] Bluetooth: BNEP filters: protocol multicast
[ 41.015379] Bridge firewalling registered
[ 41.050423] Bluetooth: SCO (Voice Link) ver 0.6
[ 41.050432] Bluetooth: SCO socket layer initialized
[ 41.067221] Bluetooth: RFCOMM socket layer initialized
[ 41.068185] Bluetooth: RFCOMM TTY layer initialized
[ 41.068193] Bluetooth: RFCOMM ver 1.10
[ 43.859092] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 44.360563] [drm] Initialized drm 1.1.0 20060810
[ 44.602259] [drm] Initialized radeon 1.29.0 20080528 on minor 0
[ 44.961620] agpgart-via 0000:00:00.0: AGP 3.5 bridge
[ 44.961647] agpgart-via 0000:00:00.0: bridge is in legacy mode,
falling back to 2.x
[ 44.961656] agpgart-via 0000:00:00.0: putting AGP V2 device into 4x mode
[ 44.961728] pci 0000:01:00.0: putting AGP V2 device into 4x mode
[ 45.216860] eth1: link down
[ 45.217793] ADDRCONF(NETDEV_UP): eth1: link is not ready
[ 45.222773] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 45.224419] e1000: eth0: e1000_watchdog: NIC Link is Up 1000 Mbps
Full Duplex, Flow Control: RX/TX
[ 45.225015] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 45.536719] [drm] Setting GART location based on new memory map
[ 45.536737] [drm] Loading R100 Microcode
[ 45.536783] [drm] writeback test succeeded in 1 usecs
[ 45.820138] NET: Registered protocol family 17
[ 56.072012] eth0: no IPv6 routers present
[ 227.616311] ppdev0: registered pardevice
[ 227.664473] ppdev0: unregistered pardevice
[ 228.688894] ppdev0: registered pardevice
[ 228.737268] ppdev0: unregistered pardevice
[ 229.944248] ppdev0: registered pardevice
[ 229.992063] ppdev0: unregistered pardevice
MfG R.Lehmeier