Firefox, gksudo...Speicherzugriffsfehler

[Sebastian Kraft]

Hallo Harry,

also die Ausgabe von smart ist folgende:

=== START OF INFORMATION SECTION ===
Device Model:     ExcelStor Technology J360
Serial Number:    VNVB01E209UYWA
Firmware Version: V22OA63A
Device is:        Not in smartctl database [for details use: -P showall]
ATA Version is:   6
ATA Standard is:  ATA/ATAPI-6 T13 1410D revision 3a
Local Time is:    Sun Jan 22 20:58:26 2006 CET
SMART support is: Available - device has SMART capability.
SMART support is: Disabled

...kann man smart aktivieren?

hdparm -I gibt mir das hier:

/dev/hdc7:

ATA device, with non-removable media
powers-up in standby; SET FEATURES subcmd spins-up.
        Model Number:       ExcelStor Technology J360
        Serial Number:      VNVB01E209UYWA
        Firmware Revision:  V22OA63A
Standards:
        Used: ATA/ATAPI-6 T13 1410D revision 3a
        Supported: 6 5 4 3
Configuration:
        Logical         max     current
        cylinders       16383   65535
        heads           16      1
        sectors/track   63      63
        --
        CHS current addressable sectors:    4128705
        LBA    user addressable sectors:  120103200
        LBA48  user addressable sectors:  120103200
        device size with M = 1024*1024:       58644 MBytes
        device size with M = 1000*1000:       61492 MBytes (61 GB)
Capabilities:
        LBA, IORDY(can be disabled)
        bytes avail on r/w long: 52     Queue depth: 32
        Standby timer values: spec'd by Standard, no device specific
minimum
        R/W multiple sector transfer: Max = 16  Current = 0
        Advanced power management level: unknown setting (0x0000)
        Recommended acoustic management value: 128, current value: 254
        DMA: mdma0 mdma1 mdma2 udma0 udma1 udma2 udma3 udma4 *udma5
             Cycle time: min=120ns recommended=120ns
        PIO: pio0 pio1 pio2 pio3 pio4
             Cycle time: no flow control=240ns  IORDY flow control=120ns
Commands/features:
        Enabled Supported:
           *    NOP cmd
           *    READ BUFFER cmd
           *    WRITE BUFFER cmd
           *    Host Protected Area feature set
                Release interrupt
           *    Look-ahead
           *    Write cache
           *    Power Management feature set
                Security Mode feature set
                SMART feature set
           *    FLUSH CACHE EXT command
           *    Mandatory FLUSH CACHE command
           *    Device Configuration Overlay feature set
           *    48-bit Address feature set
                Automatic Acoustic Management feature set
                SET MAX security extension
                Address Offset Reserved Area Boot
                SET FEATURES subcommand required to spinup after power
up
                Power-Up In Standby feature set
                Advanced Power Management feature set
           *    READ/WRITE DMA QUEUED
           *    General Purpose Logging feature set
           *    SMART self-test
           *    SMART error logging
Security:
        Master password revision code = 65534
                supported
        not     enabled
        not     locked
        not     frozen
        not     expired: security count
        not     supported: enhanced erase
        30min for SECURITY ERASE UNIT.
HW reset results:
        CBLID- above Vih
        Device num = 0 determined by the jumper
Checksum: correct

und zu guter letzt meine fstab um meine partitionierung zu sehen:

# <file system> <mount point>   <type>  <options>       <dump>  <pass>
proc            /proc           proc    defaults        0       0
/dev/hdc3       /               ext3    defaults,errors=remount-ro 0
1
/dev/hdc7       /home           ext3    defaults        0       2
/dev/hdc6       none            swap    sw              0       0
/dev/hda        /media/cdrom0   udf,iso9660 user,noauto     0       0
/dev/hdb        /media/cdrom1   udf,iso9660 user,noauto     0       0
/dev/fd0        /media/floppy0  auto    rw,user,noauto  0       0
/dev/hdc5       /media/Win_Linux  vfat    iocharset=utf8,umask=000   0
0
/dev/hdd6       /media/Media  vfat    iocharset=utf8,umask=000   0    

ich hoffe du kannst damit was anfangen...vielen Dank für deine
Bemühungen...

Gruß, sebastian

PS: solltest du ICQ/Jabber/MSN-Nutzer sein, meine eMail-Adresse steht ja
oben drin...geht vielleicht etwas einfacher :)