Problem mit der Bildschirmauflösung
Richard Palfalvi
richard.palfalvi at chello.at
Mon Sep 5 13:59:13 CDT 2005
Hi,
danke für den Tipp.
Nach der ersten Installation war im xorg.conf-file nur dein Vorschlag
(1024x768) eingetragen. Das hat mich ja stutzig gemacht, da der xserver
nur mit 640x480 gestartet hat (und das Gnome-Einstellungs-Menü auch nix
anderes angezeigt hat).
Dann habe ich mit dpkg-reconfigure den xserver nochmals konfiguriert,
dadurch hatte ich dann alle 3 Werte in dem config-file drinnen.
Und ich kapiers noch immer nicht, warum es nicht funkt #:-|
(siehe auch mein 2. mail dazu an die Liste)
any other hints?
lg, Ri.
Ingo Braun schrieb:
> Richard Palfalvi schrieb:
>
>> Hi!
>>
>> Ich habe heute Ubuntu-5.04 neu auf meinem Laptop
>> (Fujitsu-Siemens-Amilo-6100) installiert. Hatte es bereits vorher schon
>> drauf, wollte aber eine Neuinstallation und Neupartitionierung meiner
>> Festplatte machen.
>>
>> Es ging alles OK, die Installation lief ohne Probleme, auch die updates
>> aus dem Netz habe ich bereits drauf.
>>
>> Allerdings funktioniert aus irgendeinem Grund die Einstellung für die
>> Bildschirmauflösung nicht :-( Ich bekomme nur ein kleines Fenster mit
>> der Auflösung von 640x480 ! Und das obwohl die Hardwareerkennung meiner
>> Silicon-Motion-Grafikkarte einwandfrei lief. In der Datei
>> /etc/X11/xorg.conf sind bei einer Farbtiefe von 24 alle drei
>> Möglichkeiten - von 1024x768, 840x600 und 640x480 - eingetragen.
>> Trotzdem startet der XSERVER nur mit der niedrigsten Auflösung.
>>
>> Im Gnome-Einstellungsmenü (System-Einstellungen-Bildschirmauflösung)
>> bekomme ich ausschließlich die niedrigste Auflösung (und nur 60HZ) zur
>> Auswahl, das heißt, auch hier kann ich keine höhere Auflösung
>> einstellen.
>>
>> Ich habe bereits mit dpkg-reconfigure xserver-xorg neu zu konfigurieren,
>> komme aber - trotz erfolgreicher Hardwareerkennung - immer auf das
>> gleiche unbefriedigende Ergebnis.
>>
>> Kann mir bitte jemand mit Tipps weiterhelfen, wie ich zur höchsten
>> Auflösung von 1024x768 komme? Im Anhang gebe ich meine
>> xorg.conf-datei dazu.
>>
>> Bitte sendet eure Antworten auch mit cc direkt an meine email-adresse.
>> herzlichen Dank im voraus!
>>
>> lg, Richard
>>
>> PS: das Eigenartige ist, das ich bei der vorigen Installation von
>> Ub-5.04 am selben Laptop diesbezgl. keinerlei Probleme hatte. Es lief
>> mit der höchstmöglichen Auflösung ....
>>
>>
>> ------------------------------------------------------------------------
>>
>> # /etc/X11/xorg.conf (xorg X Window System server configuration file)
>> #
>> # This file was generated by dexconf, the Debian X Configuration
>> tool, using
>> # values from the debconf database.
>> #
>> # Edit this file with caution, and see the /etc/X11/xorg.conf manual
>> page.
>> # (Type "man /etc/X11/xorg.conf" at the shell prompt.)
>> #
>> # This file is automatically updated on xserver-xorg package upgrades
>> *only*
>> # if it has not been modified since the last upgrade of the xserver-xorg
>> # package.
>> #
>> # If you have edited this file but would like it to be automatically
>> updated
>> # again, run the following commands:
>> #
>> # cp /etc/X11/xorg.conf /etc/X11/xorg.conf.custom
>> # sudo sh -c 'md5sum /etc/X11/xorg.conf
>> >/var/lib/xfree86/xorg.conf.md5sum'
>> # sudo dpkg-reconfigure xserver-xorg
>>
>> Section "Files"
>> FontPath "unix/:7100" # local font server
>> # if the local font server has problems, we can fall back on these
>> FontPath "/usr/lib/X11/fonts/misc"
>> FontPath "/usr/lib/X11/fonts/cyrillic"
>> FontPath "/usr/lib/X11/fonts/100dpi/:unscaled"
>> FontPath "/usr/lib/X11/fonts/75dpi/:unscaled"
>> FontPath "/usr/lib/X11/fonts/Type1"
>> FontPath "/usr/lib/X11/fonts/CID"
>> FontPath "/usr/lib/X11/fonts/100dpi"
>> FontPath "/usr/lib/X11/fonts/75dpi"
>> # paths to defoma fonts
>> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
>> FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
>> EndSection
>>
>> Section "Module"
>> Load "bitmap"
>> Load "dbe"
>> Load "ddc"
>> Load "dri"
>> Load "extmod"
>> Load "freetype"
>> Load "glx"
>> Load "int10"
>> Load "record"
>> Load "type1"
>> Load "vbe"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Generic Keyboard"
>> Driver "keyboard"
>> Option "CoreKeyboard"
>> Option "XkbRules" "xorg"
>> Option "XkbModel" "pc105"
>> Option "XkbLayout" "de"
>> Option "XkbVariant" "nodeadkeys"
>> Option "XkbOptions" "nodeadkeys"
>> EndSection
>>
>> Section "InputDevice"
>> Identifier "Configured Mouse"
>> Driver "mouse"
>> Option "CorePointer"
>> Option "Device" "/dev/input/mice"
>> Option "Protocol" "ImPS/2"
>> Option "Emulate3Buttons" "true"
>> Option "ZAxisMapping" "4 5"
>> EndSection
>> Section "InputDevice"
>> Identifier "Synaptics Touchpad"
>> Driver "synaptics"
>> Option "SendCoreEvents" "true"
>> Option "Device" "/dev/psaux"
>> Option "Protocol" "auto-dev"
>> Option "HorizScrollDelta" "0"
>> EndSection
>>
>> Section "Device"
>> Identifier "Silicon Motion, Inc. SM720 Lynx3DM"
>> Driver "siliconmotion"
>> BusID "PCI:0:2:0"
>> EndSection
>>
>> Section "Monitor"
>> Identifier "Fujitsu-Siemens-LCD"
>> Option "DPMS"
>> EndSection
>>
>> Section "Screen"
>> Identifier "Default Screen"
>> Device "Silicon Motion, Inc. SM720 Lynx3DM"
>> Monitor "Fujitsu-Siemens-LCD"
>> DefaultDepth 24
>> SubSection "Display"
>> Depth 1
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 4
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 8
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 15
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 16
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> SubSection "Display"
>> Depth 24
>> Modes "1024x768" "800x600" "640x480"
>> EndSubSection
>> EndSection
>>
>> Section "ServerLayout"
>> Identifier "Default Layout"
>> Screen "Default Screen"
>> InputDevice "Generic Keyboard"
>> InputDevice "Configured Mouse"
>> InputDevice "Synaptics Touchpad"
>> EndSection
>>
>> Section "DRI"
>> Mode 0666
>> EndSection
>>
>>
> hmmm ...
>
> vieleicht mal nur 1024x768 in die xorg.conf eintragen und den xserver
> neustarten.
> oder auch mal in den recovery mode booten und den xserver manuell
> starten ...
>
> mfg ingo braun
>
>
>