Blank screen

[Marco Bluethgen]

Hallo Sebastian,

Habe ein Gericom Blockbuster Excellent. Sollte fast baugleich mit deinem
Laptop sein. Ok du hast einen aktuelleren Grafikchip von ATI. Schicke dir
mal meine xorg.conf. Vielleicht hilft dir das etwas weiter.

Ciao Marco

xorg.conf:
# /etc/X11/xorg.conf (xorg X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
#
# Edit this file with caution, and see the /etc/X11/xorg.conf manual page.
# (Type "man /etc/X11/xorg.conf" at the shell prompt.)
#
# This file is automatically updated on xserver-xorg package upgrades *only*
# if it has not been modified since the last upgrade of the xserver-xorg
# package.
#
# If you have edited this file but would like it to be automatically updated
# again, run the following command:
#   sudo dpkg-reconfigure -phigh xserver-xorg

Section "Files"
    FontPath    "/usr/share/X11/fonts/misc"
    FontPath    "/usr/share/X11/fonts/cyrillic"
    FontPath    "/usr/share/X11/fonts/100dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/75dpi/:unscaled"
    FontPath    "/usr/share/X11/fonts/Type1"
    FontPath    "/usr/share/X11/fonts/CID"
    FontPath    "/usr/share/X11/fonts/100dpi"
    FontPath    "/usr/share/X11/fonts/75dpi"
        # paths to defoma fonts
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
    FontPath    "/var/lib/defoma/x-ttcidfont-conf.d/dirs/CID"
EndSection

Section "Module"
    Load    "GLcore"
    Load    "i2c"
    Load    "bitmap"
    Load    "ddc"
    Load    "dri"
    Load    "extmod"
    Load    "freetype"
    Load    "glx"
    Load    "int10"
    Load    "type1"
    Load    "vbe"
EndSection

Section "InputDevice"
    Identifier    "Generic Keyboard"
    Driver        "kbd"
    Option        "CoreKeyboard"
    Option        "XkbRules"    "xorg"
    Option        "XkbModel"    "pc105"
    Option        "XkbLayout"    "de"
    Option        "XkbVariant"    "nodeadkeys"
EndSection

Section "InputDevice"
    Identifier    "Configured Mouse"
    Driver        "mouse"
    Option        "CorePointer"
    Option        "Device"        "/dev/input/mice"
    Option        "Protocol"        "ImPS/2"
    Option        "Emulate3Buttons"    "true"
    Option        "ZAxisMapping"        "4 5"
EndSection

Section "InputDevice"
    Identifier    "Synaptics Touchpad"
    Driver        "synaptics"
    Option        "SendCoreEvents"    "true"
    Option        "Device"        "/dev/psaux"
    Option        "Protocol"        "auto-dev"
    Option        "HorizScrollDelta"    "0"
EndSection

Section "Device"
    Identifier    "ATI Technologies, Inc. Radeon Mobility 9600 M11 (RV350
NR)"
    Driver        "ati"
    BusID        "PCI:1:0:0"
EndSection

Section "Monitor"
    Identifier    "Standardbildschirm"
    Option        "DPMS"
    Modeline    "1280x800 at 60" 83.91 1280 1312 1624 1656 800 816 824 841
EndSection

Section "Screen"
    Identifier    "Default Screen"
    Device        "ATI Technologies, Inc. Radeon Mobility 9600 M11 (RV350
NR)"
    Monitor        "Standardbildschirm"
    DefaultDepth    24
    SubSection "Display"
        Depth        1
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        4
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        8
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        15
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        16
        Modes        "1280x800"
    EndSubSection
    SubSection "Display"
        Depth        24
        Modes        "1280x800"
    EndSubSection
EndSection

Section "ServerLayout"
    Identifier    "Default Layout"
    Screen        "Default Screen"
    InputDevice    "Generic Keyboard"
    InputDevice    "Configured Mouse"
    InputDevice    "Synaptics Touchpad"
EndSection

Section "DRI"
    Mode    0666
EndSection

Section "Extensions"
    Option     "Composite"    "true"
EndSection


Am 04.12.05 schrieb Sebastian Köhlmeier <seti at setadesign.net>:
>
> Hallo,
>
> ich probiert breezy badger auf meinen laptop zu installieren,
> und nach mehreren anläufen funktionert es sogar das
> der X server startet.
> Jetzt hab ich nur noch das problem das der bildschirm schwarz bleibt.
> die frequenzeinstellungen sind es mit ziemlicher sicherheit nicht.
> ich habe gelesen das es nicht weiß ob es das panel im laptop
> oder einen externen bildschirm ansprechen soll und es desswegen schwarz
> bleibt.
> die lösungen was dort angegeben sind, funktionieren aber leider bei mir
> nicht.
>
> System:
> FSC Amilo A 1667G
>
> Turion ML-32
> 1gb rm
> x700
> 1280x800 panel
> Breezy Badger 32 Bit version
>
> hoffe es kann mir jemand helfen.
>
> --
> ubuntu-de mailing list
> ubuntu-de at lists.ubuntu.com
> http://lists.ubuntu.com/mailman/listinfo/ubuntu-de
>
-------------- nächster Teil --------------
Ein Dateianhang mit HTML-Daten wurde abgetrennt...
URL: http://lists.ubuntu.com/archives/ubuntu-de/attachments/20051204/f4f6000b/attachment-0001.htm