router

raymond house raymondh40 at gmail.com
Sat Jul 21 15:18:38 UTC 2012


Ok I did that Daniel, all looks normal on the router but when I remove the
wired connection from the computer I get disconnected from the net, should
I not, then be in wireless mode? I set up the router as you said, I choose
DHCP and entered a key password.

On Sat, Jul 21, 2012 at 10:21 AM, Daniel Villarreal
<youcanlinux at gmail.com>wrote:

> I recommend logging in
> Go to manual internet connection setup
> Choose DHCP, if that's what you use.
> For Dynamic IP (DHCP) Internet Connection Type, this should be populated
> by your ISP.
>
> On the left side, click on wireless services
> manual wireless network setup
> WPA-personal is where you choose a key, and type it in the "pre-shared
> key" space
>
> good luck,
> Daniel Villarreal
> http://youcanlinux.org/
>
>
>
> On Sat, Jul 21, 2012 at 8:34 AM, raymond house <raymondh40 at gmail.com>wrote:
>
>> HI Daniel, I did not have the right cable and I now have access to the
>> router and I have done the wizard setup but the net connection keeps
>> dropping out, don't know where to go from here.
>>
>>
>> On Sat, Jul 21, 2012 at 9:26 AM, Daniel Villarreal <youcanlinux at gmail.com
>> > wrote:
>>
>>> You should be seeing the D-Link login page.
>>>
>>> One more thing...
>>> Unplug power to your cable modem and remove any batteries for > 30
>>> seconds.
>>> Re-connect power cable to your cable modem, let it range.
>>> Then unplug power cable to router for a couple of seconds.
>>> Then you should see the D-Link login page when you surf to the proper
>>> local IP address, perhaps it's 192.168.1.1 ?
>>>
>>> regards,
>>> Daniel Villarreal
>>> http://youcanlinux.org/
>>>
>>> On Sat, Jul 21, 2012 at 5:36 AM, raymond house <raymondh40 at gmail.com>wrote:
>>>
>>>>  Thanks guys, but I can't edit anything in the router, when I type
>>>> 192.168.0.1 in the firefox bar I can't find the panel where I'm supposed to
>>>> insert "admin & password". There are many links to a lot of explanations on
>>>> private IP addresses but no way I can do what the D-Link manual says I
>>>> should for linux.
>>>>
>>>> --
>>>> ubuntu-ca mailing list
>>>> ubuntu-ca at lists.ubuntu.com
>>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ca
>>>>
>>>>
>>>
>>> --
>>> ubuntu-ca mailing list
>>> ubuntu-ca at lists.ubuntu.com
>>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ca
>>>
>>>
>>
>> --
>> ubuntu-ca mailing list
>> ubuntu-ca at lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ca
>>
>>
>
> --
> ubuntu-ca mailing list
> ubuntu-ca at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-ca
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-ca/attachments/20120721/967eb9e3/attachment-0001.html>


More information about the ubuntu-ca mailing list