[Bug 1598868] Re: growisofs bug
Robert DuPont
1598868 at bugs.launchpad.net
Tue Jul 5 13:29:40 UTC 2016
Hello,
Thanks for your prompt response and analysis.
I will try getting some DVD-R instead of +R and see if that works.
The burner is about eight years old, it has been great, maybe it's finally
giving out.
Thank you again
RFD
On Jul 5, 2016 6:35 AM, "Thomas Schmitt" <scdbackup at gmx.net> wrote:
> Hi,
>
> > growisofs
> > ...
> > :-[ WRITE at LBA=220h failed with SK=3h/WRITE ERROR]: Input/output error
>
> Regrettably it does not tell the additional info numbers ASC and ASCQ.
> But SK=3 means that the drive cannot write to the medium because of
> unexpected problems. I.e. not because the DVD would not be writable by
> its type and state.
>
> "220h" means that the drive raised protest after growisofs sent it the
> first 544 blocks = 1,114,112 bytes. This is well within the size of the
> drive buffer. So one may assume that the drive was not able to write
> any data with sufficient quality.
>
> If other burn programs (e.g. my libburn) yield better success, then this
> would either be because mere luck, or because a different write method was
> used. Write methods depend on the DVD type, e.g. DVD-R offers DAO and
> Incremental, DVD+R offers writing with or without track reservation.
> The growisofs run did not require DAO. But it is not obvious whether DVD-R
> or DVD+R was in use.
>
> Whatever, a first try of remedy would be to buy some new DVD media of
> the other type as the one used before. E.g. DVD-R if your failure was with
> DVD+R. If this helps, try newly bought DVD of the type and manufacturer
> that failed before.
>
> If not the failing old DVD media turn out to be just bad while all newly
> bought DVD work fine, then it is time to consider replacing the burner
> drive.
>
> Have a nice day :)
>
> Thomas
>
> --
> You received this bug notification because you are subscribed to the bug
> report.
> https://bugs.launchpad.net/bugs/1598868
>
> Title:
> growisofs bug
>
> Status in dvd+rw-tools package in Ubuntu:
> New
>
> Bug description:
> I am using K3b to burn data DVD's. I have been using the program for
> years with no problems. But now, the program will not burn data
> DVk3bD's. It claims to be 'flushing the cache' which I have never seen
> before. it then cancels without writing anything.
>
> Here is the debugging report:
>
> Burned media
> -----------------------
> DVD+R
>
> Devices
> -----------------------
> ASUS SDRW-08D1S-U 1.02 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R,
> DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R Sequential,
> DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW
> Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer,
> CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P,
> RAW/R96R, Restricted Overwrite, Layer Jump] [%7]
>
> K3b::IsoImager
> -----------------------
> mkisofs print size result: 789478 (1616850944 bytes)
>
> System
> -----------------------
> K3b Version: 2.0.2
> KDE Version: 4.13.3
> QT Version: 4.8.6
> Kernel: 3.19.0-64-generic
>
> Used versions
> -----------------------
> mkisofs: 1.1.11
> growisofs: 7.1
>
> growisofs
> -----------------------
> Executing 'builtin_dd if=/dev/fd/0 of=/dev/sr0 obs=32k seek=0'
> /dev/sr0: "Current Write Speed" is 8.2x1352KBps.
> :-[ WRITE at LBA=220h failed with SK=3h/WRITE ERROR]: Input/output error
> :-( write failed: Input/output error
> /dev/sr0: flushing cache
>
> growisofs command:
> -----------------------
> /usr/bin/growisofs -Z /dev/sr0=/dev/fd/0 -use-the-force-luke=notray
> -use-the-force-luke=tty -use-the-force-luke=4gms
> -use-the-force-luke=tracksize:789478 -speed=8
> -use-the-force-luke=bufsize:32m
>
> mkisofs
> -----------------------
> 789478
> I: -input-charset not specified, using utf-8 (detected in locale
> settings)
> 0.06% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.13% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.19% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.25% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.32% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.38% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.44% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.51% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.57% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.63% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.70% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.76% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.82% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.89% done, estimate finish Mon Jul 4 10:22:18 2016
> 0.95% done, estimate finish Mon Jul 4 10:22:18 2016
> 1.01% done, estimate finish Mon Jul 4 10:22:18 2016
> 1.08% done, estimate finish Mon Jul 4 10:23:50 2016
> 1.14% done, estimate finish Mon Jul 4 10:23:45 2016
> 1.20% done, estimate finish Mon Jul 4 10:23:41 2016
> 1.27% done, estimate finish Mon Jul 4 10:23:36 2016
> 1.33% done, estimate finish Mon Jul 4 10:23:33 2016
> 1.39% done, estimate finish Mon Jul 4 10:23:29 2016
> 1.46% done, estimate finish Mon Jul 4 10:23:26 2016
> 1.52% done, estimate finish Mon Jul 4 10:23:23 2016
> 1.58% done, estimate finish Mon Jul 4 10:23:21 2016
> 1.65% done, estimate finish Mon Jul 4 10:23:18 2016
> 1.71% done, estimate finish Mon Jul 4 10:23:16 2016
> 1.77% done, estimate finish Mon Jul 4 10:23:14 2016
> 1.84% done, estimate finish Mon Jul 4 10:23:12 2016
> 1.90% done, estimate finish Mon Jul 4 10:23:10 2016
> 1.96% done, estimate finish Mon Jul 4 10:23:08 2016
> 2.03% done, estimate finish Mon Jul 4 10:23:07 2016
> 2.09% done, estimate finish Mon Jul 4 10:23:05 2016
>
> mkisofs calculate size command:
> -----------------------
> /usr/bin/genisoimage -gui -graft-points -print-size -quiet -volid K3b
> data project -volset -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN
> TRUEG AND MICHAL MALEK -publisher -preparer -sysid LINUX -volset-size 1
> -volset-seqno 1 -sort /tmp/kde-robert/k3bcF2851.tmp -rational-rock
> -hide-list /tmp/kde-robert/k3bcS2851.tmp -joliet -joliet-long
> -hide-joliet-list /tmp/kde-robert/k3bVs2851.tmp -no-cache-inodes
> -full-iso9660-filenames -iso-level 3 -path-list
> /tmp/kde-robert/k3baq2851.tmp
>
> mkisofs command:
> -----------------------
> /usr/bin/genisoimage -gui -graft-points -volid K3b data project -volset
> -appid K3B THE CD KREATOR (C) 1998-2010 SEBASTIAN TRUEG AND MICHAL MALEK
> -publisher -preparer -sysid LINUX -volset-size 1 -volset-seqno 1 -sort
> /tmp/kde-robert/k3bGS2851.tmp -rational-rock -hide-list
> /tmp/kde-robert/k3btQ2851.tmp -joliet -joliet-long -hide-joliet-list
> /tmp/kde-robert/k3bmn2851.tmp -no-cache-inodes -full-iso9660-filenames
> -iso-level 3 -path-list /tmp/kde-robert/k3bbh2851.tmp
>
> I believe the problem lies in the growisofs program, for I have tried
> other burning programs and the same thing occurs
>
> To manage notifications about this bug go to:
>
> https://bugs.launchpad.net/ubuntu/+source/dvd+rw-tools/+bug/1598868/+subscriptions
>
--
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to dvd+rw-tools in Ubuntu.
https://bugs.launchpad.net/bugs/1598868
Title:
growisofs bug
To manage notifications about this bug go to:
https://bugs.launchpad.net/ubuntu/+source/dvd+rw-tools/+bug/1598868/+subscriptions
More information about the Ubuntu-burning
mailing list