[Bug 578910] Re: Brasero burning ISO dvd-rw fail please eject manually

[Ian ten Cate]

Same here, burning an ISO to DVD

Ubuntu 10.04

AMD64 on Intel quad-core, 4 GB RAM
Nvidia Chipset

HD with ISO image: Direct-Access     ATA      ST31000340AS     AD14 PQ: 0 ANSI: 5
Excerpts from dmesg:
[    1.581557] ata4: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xf708 irq 23
[    1.582164] ACPI: PCI Interrupt Link [AMC1] enabled at IRQ 23
[    1.582169] forcedeth 0000:00:12.0: PCI INT A -> Link[AMC1] -> GSI 23 (level,
 low) -> IRQ 23
[    1.582173] forcedeth 0000:00:12.0: setting latency timer to 64
[    1.582213] nv_probe: set workaround bit for reversed mac addr
[    1.600064] usb 1-3: new high speed USB device using ehci_hcd and address 4
[    1.920565] ata3: SATA link down (SStatus 0 SControl 300)
[    2.110795] forcedeth 0000:00:12.0: ifname eth1, PHY OUI 0x5043 @ 1, addr 00:
1a:92:7d:5c:85
[    2.110798] forcedeth 0000:00:12.0: highdma csum vlan pwrctl mgmt gbit lnktim
 msi desc-v3
[    2.111117] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    2.111120] sata_nv 0000:00:0e.1: PCI INT B -> Link[APSJ] -> GSI 22 (level, l
ow) -> IRQ 22
[    2.111122] sata_nv 0000:00:0e.1: Using SWNCQ mode
[    2.111327] sata_nv 0000:00:0e.1: setting latency timer to 64
[    2.111447] scsi4 : sata_nv
[    2.111594] scsi5 : sata_nv


DVD-RW drive: TSSTcorp CD/DVDW SH-S182M SB05 PQ: 0 ANSI: 5

[    0.992145] udev: starting version 151
[    1.024088] pata_amd 0000:00:0d.0: version 0.4.1
[    1.024133] pata_amd 0000:00:0d.0: setting latency timer to 64
[    1.026230] xor: automatically using best checksumming function: generic_sse
[    1.036121] scsi0 : pata_amd
[    1.041054] scsi1 : pata_amd
[    1.041752] ata1: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xfc00 irq 14
[    1.041755] ata2: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xfc08 irq 15
[    1.041826] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.6
4.
[    1.042228] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 20
[    1.042235]   alloc irq_desc for 20 on node -1
[    1.042237]   alloc kstat_irqs on node -1
[    1.042246] forcedeth 0000:00:11.0: PCI INT A -> Link[APCH] -> GSI 20 (level,
 low) -> IRQ 20
[    1.042252] forcedeth 0000:00:11.0: setting latency timer to 64
[    1.042359] nv_probe: set workaround bit for reversed mac addr
[    1.072504]    generic_sse:  8543.600 MB/sec
[    1.072507] xor: using function: generic_sse (8543.600 MB/sec)
[    1.212815] ata1.00: ATAPI: TSSTcorpCD/DVDW SH-S182M, SB05, max UDMA/33
[    1.212832] ata1: nv_mode_filter: 0x739f&0x739f->0x739f, BIOS=0x7000 (0xc0000
000) ACPI=0x701f (60:600:0x13)
[    1.252759] ata1.00: configured for UDMA/33
[    1.254052] scsi 0:0:0:0: CD-ROM            TSSTcorp CD/DVDW SH-S182M SB05 PQ
: 0 ANSI: 5
[    1.261119] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda 
tray
[    1.261123] Uniform CD-ROM driver Revision: 3.20
[    1.261253] sr 0:0:0:0: Attached scsi CD-ROM sr0
[    1.261336] sr 0:0:0:0: Attached scsi generic sg0 type 5
[    1.261431] ata2: port disabled. ignoring.

DVD+R media

Same combination of hardware worked fine with other OS / software
(Win7x64 + ImgBurn) so I'm pretty sure it isn't hardware-related.

Brasero 2.30.0

-- 
Brasero burning ISO dvd-rw fail please eject manually
https://bugs.launchpad.net/bugs/578910
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to brasero in ubuntu.