[Bug 531901] Re: Can't burn CD's using any tool

[Jaka]

I removed wodim from synaptic. Than I created links for cdrecord, readcd
and cdda2wav in the /opt/schily/bin directory. I pasted links into
/usr/bin folder. I think the output is the same:

jaka at LaptopJaka:~$ sudo cdrecord -v speed=16 dev='/dev/scd0' Desktop/VinsekISOMaster.iso
cdrecord: No write mode specified.
cdrecord: Assuming -sao mode.
cdrecord: If your drive does not accept -sao, try -tao.
cdrecord: Future versions of cdrecord may have different drive dependent defaults.
Cdrecord-ProDVD-ProBD-Clone 2.01.01a77 (x86_64-unknown-linux-gnu) Copyright (C) 1995-2010 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Warning: Open by 'devname' is unintentional and not supported.
Linux sg driver version: 3.5.27
Using libscg version 'schily-0.9'.
SCSI buffer size: 64512
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identifikation : 'DVD+-RW GA11N   '
Revision       : 'A101'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-R
Profile: DVD-RAM 
Profile: DVD-R sequential recording 
Profile: DVD-R/DL sequential recording 
Profile: DVD-RW sequential recording 
Profile: DVD-RW restricted overwrite 
Profile: DVD+RW 
Profile: DVD+R 
Profile: DVD+R/DL 
Profile: DVD-ROM 
Profile: CD-R (current)
Profile: CD-RW 
Profile: CD-ROM (current)
Profile: Removable Disk 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive pbuf size: 1966080 = 1920 KB
cdrecord: Warning: DMA resid 0 for 'read buffer', actual data is too short.
cdrecord: Warning: The DMA speed test has been skipped.
FIFO size      : 4194304 = 4096 KB
Track 01: data   685 MB        
Total size:      787 MB (77:59.97) = 350998 sectors
Lout start:      787 MB (78:01/73) = 350998 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
Disk Is not unrestricted
Disk Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation

    Capacity  Blklen/Sparesz.  Format-type  Type
           0             2048         0x00  No Media Present or Unknown Capacity
cdrecord: Cannot get next writable address for 'invisible' track.
cdrecord: This means that we are checking recorded media.
cdrecord: This media cannot be written in streaming mode anymore.
cdrecord: If you like to write to 'preformatted' RW media, try to blank the media first.
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 8848
Starting to write CD/DVD/BD at speed 16 in real SAO mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
BURN-Free is OFF.
Performing OPC...
Sending CUE sheet...
cdrecord: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
cdrecord: Input/output error. send_cue_sheet: scsi sendcmd: no error
CDB:  5D 00 00 00 00 00 00 00 20 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 5D 34 02 80 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid) 
cmd finished after 0.005s timeout 200s
cdrecord: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
cdrecord: Cannot send CUE sheet.
cdrecord: Could not write Lead-in.
Writing  time:    1.782s
cdrecord: fifo had 64 puts and 0 gets.
cdrecord: fifo was 0 times empty and 0 times full, min fill was 100%.
jaka at LaptopJaka:~$

-- 
Can't burn CD's using any tool
https://bugs.launchpad.net/bugs/531901
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to cdrtools in ubuntu.