[Bug 514520] Re: Cannot erase CD-RW with wodim after upgrading Ubuntu from 9.04 to 9.10
arohrbacher
arohrbacher at hotmail.com
Fri Jan 29 21:59:05 GMT 2010
** Description changed:
Binary package hint: wodim
- When I want to erase a CD-RW with wodim 1.1.9 (under Ubuntu 9.10), I get a error message and the disk is not erased. The same command works fine in Ubuntu 9.04 before I upgraded Ubuntu to 9.10.
+ When I want to erase a CD-RW with wodim 1.1.9 (under Ubuntu 9.10), I get an error message and the disk is not erased. The same command works fine in Ubuntu 9.04 before I upgraded Ubuntu to 9.10.
As Brasero and K3b also use wodim they also cannot erase CD-RWs anymore after upgrading to 9.10...
Below is the output of wodim under Ubuntu 9.10 and 9.04...
Thanks, Andreas
+
under Ubuntu 9.10:
andreas at ALIX:~$ /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -tao driveropts=burnfree blank=fast
TOC Type: 1 = CD-ROM
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 0
Response Format: 2
- Capabilities :
+ Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7200A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
- Profile: 0x002B (DVD+R/DL)
- Profile: 0x001B (DVD+R)
- Profile: 0x001A (DVD+RW)
- Profile: 0x0016 (DVD-R/DL layer jump recording)
- Profile: 0x0015 (DVD-R/DL sequential recording)
- Profile: 0x0014 (DVD-RW sequential recording)
- Profile: 0x0013 (DVD-RW restricted overwrite)
- Profile: 0x0012 (DVD-RAM)
- Profile: 0x0011 (DVD-R sequential recording)
- Profile: 0x0010 (DVD-ROM)
+ Profile: 0x002B (DVD+R/DL)
+ Profile: 0x001B (DVD+R)
+ Profile: 0x001A (DVD+RW)
+ Profile: 0x0016 (DVD-R/DL layer jump recording)
+ Profile: 0x0015 (DVD-R/DL sequential recording)
+ Profile: 0x0014 (DVD-RW sequential recording)
+ Profile: 0x0013 (DVD-RW restricted overwrite)
+ Profile: 0x0012 (DVD-RAM)
+ Profile: 0x0011 (DVD-R sequential recording)
+ Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
- Profile: 0x0009 (CD-R)
+ Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM) (current)
- Profile: 0x0002 (Removable disk)
+ Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
- Driver flags : MMC-3 SWABAUDIO BURNFREE
+ Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 866304 = 846 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Current Secsize: 2048
ATIP info from disk:
- Indicated writing power: 5
- Reference speed: 2
- Is not unrestricted
- Is erasable
- ATIP start of lead in: -11745 (97:25/30)
- ATIP start of lead out: 359849 (79:59/74)
- 1T speed low: 0 (reserved val 0) 1T speed high: 4
- 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
- power mult factor: 4 6
- recommended erase/write power: 3
- A1 values: 02 4C B0
- A2 values: 5C D8 36
+ Indicated writing power: 5
+ Reference speed: 2
+ Is not unrestricted
+ Is erasable
+ ATIP start of lead in: -11745 (97:25/30)
+ ATIP start of lead out: 359849 (79:59/74)
+ 1T speed low: 0 (reserved val 0) 1T speed high: 4
+ 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
+ power mult factor: 4 6
+ recommended erase/write power: 3
+ A1 values: 02 4C B0
+ A2 values: 5C D8 36
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Speed set to 706 KB/s
Starting to write CD/DVD at speed 4.0 in real BLANK mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Errno: 5 (Input/output error), blank unit scsi sendcmd: no error
CDB: A1 01 00 00 00 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
- Sense flags: Blk 0 (not valid)
+ Sense flags: Blk 0 (not valid)
cmd finished after 0.000s timeout 9600s
/usr/bin/wodim: Cannot blank disk, aborting.
/usr/bin/wodim: Some drives do not support all blank types.
/usr/bin/wodim: Try again with wodim blank=all.
-
under Ubuntu 9.04:
andreas at ALIX:~$ /usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=4 -tao driveropts=burnfree blank=fast
TOC Type: 1 = CD-ROM
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type : Removable CD-ROM
Version : 0
Response Format: 2
- Capabilities :
+ Capabilities :
Vendor_info : 'Optiarc '
Identification : 'DVD RW AD-7200A '
Revision : '1.06'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
- Profile: 0x002B (DVD+R/DL)
- Profile: 0x001B (DVD+R)
- Profile: 0x001A (DVD+RW)
- Profile: 0x0016 (DVD-R/DL layer jump recording)
- Profile: 0x0015 (DVD-R/DL sequential recording)
- Profile: 0x0014 (DVD-RW sequential recording)
- Profile: 0x0013 (DVD-RW restricted overwrite)
- Profile: 0x0012 (DVD-RAM)
- Profile: 0x0011 (DVD-R sequential recording)
- Profile: 0x0010 (DVD-ROM)
+ Profile: 0x002B (DVD+R/DL)
+ Profile: 0x001B (DVD+R)
+ Profile: 0x001A (DVD+RW)
+ Profile: 0x0016 (DVD-R/DL layer jump recording)
+ Profile: 0x0015 (DVD-R/DL sequential recording)
+ Profile: 0x0014 (DVD-RW sequential recording)
+ Profile: 0x0013 (DVD-RW restricted overwrite)
+ Profile: 0x0012 (DVD-RAM)
+ Profile: 0x0011 (DVD-R sequential recording)
+ Profile: 0x0010 (DVD-ROM)
Profile: 0x000A (CD-RW) (current)
- Profile: 0x0009 (CD-R)
+ Profile: 0x0009 (CD-R)
Profile: 0x0008 (CD-ROM) (current)
- Profile: 0x0002 (Removable disk)
+ Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
- Driver flags : MMC-3 SWABAUDIO BURNFREE
+ Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96R RAW/R96R
Drive buf size : 866304 = 846 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Current Secsize: 2048
ATIP info from disk:
- Indicated writing power: 5
- Reference speed: 2
- Is not unrestricted
- Is erasable
- ATIP start of lead in: -11745 (97:25/30)
- ATIP start of lead out: 359849 (79:59/74)
- 1T speed low: 0 (reserved val 0) 1T speed high: 4
- 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
- power mult factor: 4 6
- recommended erase/write power: 3
- A1 values: 02 4C B0
- A2 values: 5C D8 36
+ Indicated writing power: 5
+ Reference speed: 2
+ Is not unrestricted
+ Is erasable
+ ATIP start of lead in: -11745 (97:25/30)
+ ATIP start of lead out: 359849 (79:59/74)
+ 1T speed low: 0 (reserved val 0) 1T speed high: 4
+ 2T speed low: 0 (reserved val 5) 2T speed high: 0 (reserved val 12)
+ power mult factor: 4 6
+ recommended erase/write power: 3
+ A1 values: 02 4C B0
+ A2 values: 5C D8 36
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Speed set to 706 KB/s
Starting to write CD/DVD at speed 4.0 in real BLANK mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time: 44.019s
--
Cannot erase CD-RW with wodim after upgrading Ubuntu from 9.04 to 9.10
https://bugs.launchpad.net/bugs/514520
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to cdrkit in ubuntu.
More information about the Ubuntu-burning
mailing list