[Bug 521499] Re: k3b crashes with Asus K51 AC

Sun Feb 14 20:31:57 GMT 2010

The crash comes with different medias allways after the lead in is 
written. I think this is a problem with the hardware. So if you also 
have the same device or computer, just try to write some mp3-files on a 
disc.
if you want, I attach the bug-report written by k3b:

Devices
-----------------------
HL-DT-ST DVDRAM GSA-T50N RR09 (/dev/sr0, CD-R, CD-RW, CD-Rom, DVD-Rom, 
DVD-R, DVD-RW, DVD-R doppelschichtig, DVD+R, DVD+RW, DVD+R 
doppelschichtig) [DVD-Rom, DVD-R Sequentiell, Zweischichtige DVD-R 
Sequentiell, Zweischicht-DVD-R Sprung, DVD-Ram, DVD-RW Eingeschränktes 
Überbrennen, DVD-RW Sequentiell, DVD+RW, DVD+R, Zweischichtige DVD+R, 
CD-Rom, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, 
RAW/R96P, RAW/R96R, Eingeschränktes Überschreiben, Sprung zwischen 
DVD-Schichten] [%7]

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version:  4.5.2
Kernel:      2.6.31-19-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Text len: 198
TOC Type: 0 = CD-DA
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   :
Vendor_info    : 'HL-DT-ST'
Identification : 'DVDRAM GSA-T50N '
Revision       : 'RR09'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM)
Profile: 0x0011 (DVD-R sequential recording)
Profile: 0x0015 (DVD-R/DL sequential recording)
Profile: 0x0016 (DVD-R/DL layer jump recording)
Profile: 0x0014 (DVD-RW sequential recording)
Profile: 0x0013 (DVD-RW restricted overwrite)
Profile: 0x001A (DVD+RW)
Profile: 0x001B (DVD+R)
Profile: 0x002B (DVD+R/DL)
Profile: 0x0010 (DVD-ROM)
Profile: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0008 (CD-ROM)
Profile: 0x0002 (Removable disk)
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1053696 = 1029 KB
Drive DMA Speed: 15396 kB/s 87x CD 11x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 1764 KB/s
pregap1: -1
Track 01: audio   54 MB (05:21.00) no preemp swab copy
Track 02: audio   53 MB (05:16.64) no preemp swab copy
Track 03: audio   50 MB (04:58.14) no preemp swab copy
Total size:      157 MB (15:35.78) = 70184 sectors
Lout start:      157 MB (15:37/59) = 70184 sectors
Current Secsize: 2048
ATIP info from disk:
   Indicated writing power: 3
   Reference speed: 6
   Is not unrestricted
   Is erasable
   Disk sub type: High speed Rewritable (CAV) media (1)
   ATIP start of lead in:  -11635 (97:26/65)
   ATIP start of lead out: 359849 (79:59/74)
   1T speed low:  4 1T speed high: 10
   2T speed low:  4 2T speed high:  0 (reserved val  6)
   power mult factor: 1 5
   recommended erase/write power: 3
   A1 values: 24 1A BC
   A2 values: 26 B2 26
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 289665
Starting to write CD/DVD at speed  10.0 in real SAO mode for single session.
Last chance to quit, starting real write in    2 seconds.
    1 seconds.
    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 FF FF FC 7D 00 02 9F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 2A 00 00 90 30 05 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) 
Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.002s timeout 200s
/usr/bin/wodim: Could not write Lead-in.
SAO startsec: -11635
Writing lead-in...
write CD-Text data: error after 1030656 bytes
Writing  time:   31.837s
/usr/bin/wodim: fifo had 192 puts and 0 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=10 -sao 
driveropts=burnfree textfile=/tmp/qt_temp.mN4868 -useinfo -audio 
/tmp/kde-norbert/k3b_audio_0_01.inf /tmp/kde-norbert/k3b_audio_0_02.inf 
/tmp/kde-norbert/k3b_audio_0_03.inf

I hope this was helpful.
Norbert

Am 13.02.2010 23:33, schrieb Sinani201:
> Thank you for taking the time to report this bug and helping to make
> Ubuntu better. Please answer these questions:
>
> * Is this reproducible?
> * If so, what specific steps should we take to recreate this bug?
>
> This will help us to find and resolve the problem.
>
>

-- 
k3b crashes with Asus K51 AC
https://bugs.launchpad.net/bugs/521499
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to k3b in ubuntu.