[Bug 432644] [NEW] BraseroWodim asked to stop because of an error error = 12

zlatena zlatena70 at abv.bg
Fri Sep 18 19:11:35 BST 2009 

Public bug reported:

Binary package hint: brasero

Checking session consistency (brasero_burn_check_session_consistency burn.c:1905)
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_set_output_size_for_current_track
BraseroBurnURI stopping
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_session_output_size
BraseroBurnURI output set (IMAGE) image = /tmp/brasero_tmp_N0ZF0U.bin toc = none
BraseroBurnURI called brasero_job_get_action
BraseroBurnURI called brasero_job_get_current_track
BraseroBurnURI called brasero_job_get_input_type
BraseroBurnURI no burn:// URI found
BraseroBurnURI stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_set_output_size_for_current_track
BraseroLocalTrack stopping
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_session_output_size
BraseroLocalTrack output set (IMAGE) image = /tmp/brasero_tmp_VN0F0U.bin toc = none
BraseroLocalTrack called brasero_job_get_action
BraseroLocalTrack called brasero_job_get_current_track
BraseroLocalTrack called brasero_job_get_input_type
BraseroLocalTrack no remote URIs
BraseroLocalTrack stopping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage Dummy operation, skipping
BraseroChecksumImage called brasero_job_get_current_track
BraseroChecksumImage called brasero_job_get_action
BraseroChecksumImage called brasero_job_get_flags
BraseroChecksumImage Dummy operation, skipping
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim got varg:
BraseroWodim deactivating
BraseroWodim called brasero_job_get_action
BraseroWodim getting varg
BraseroWodim called brasero_job_get_action
BraseroWodim called brasero_job_get_device
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_speed
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_get_fd_in
BraseroWodim called brasero_job_get_current_track
BraseroWodim called brasero_job_set_current_action
BraseroWodim got varg:
	wodim
	-v
	dev=/dev/sr0
	-dummy
	speed=16
	driveropts=burnfree
	-dao
	fs=16m
	-data
	-nopad
	/home/z/Плот/arklinux-2008.1.iso
BraseroWodim Launching command
BraseroWodim called brasero_job_get_fd_out
BraseroWodim stderr: scsidev: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: devname: '/dev/sr0'
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: scsibus: -2 target: -2 lun: -2
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Linux sg driver version: 3.5.27
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Wodim version: 1.1.9
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: SCSI buffer size: 64512
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: communication breaks or freezes immediately after that.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: TOC Type: 1 = CD-ROM
BraseroWodim stdout: Driveropts: 'burnfree'
BraseroWodim stdout: Device type    : Removable CD-ROM
BraseroWodim stdout: Version        : 5
BraseroWodim stdout: Response Format: 2
BraseroWodim stdout: Capabilities   : 
BraseroWodim stdout: Vendor_info    : 'ASUS    '
BraseroWodim stdout: Identification : 'DRW-20B1ST      '
BraseroWodim stdout: Revision       : '1.01'
BraseroWodim stdout: Device seems to be: Generic mmc2 DVD-R/DVD-RW.
BraseroWodim stdout: Current: 0x0009 (CD-R)
BraseroWodim stdout: Profile: 0x002B (DVD+R/DL) 
BraseroWodim stdout: Profile: 0x001B (DVD+R) 
BraseroWodim stdout: Profile: 0x001A (DVD+RW) 
BraseroWodim stdout: Profile: 0x0016 (DVD-R/DL layer jump recording) 
BraseroWodim stdout: Profile: 0x0015 (DVD-R/DL sequential recording) 
BraseroWodim stdout: Profile: 0x0014 (DVD-RW sequential recording) 
BraseroWodim stdout: Profile: 0x0013 (DVD-RW restricted overwrite) 
BraseroWodim stdout: Profile: 0x0012 (DVD-RAM) 
BraseroWodim stdout: Profile: 0x0011 (DVD-R sequential recording) 
BraseroWodim stdout: Profile: 0x0010 (DVD-ROM) 
BraseroWodim stdout: Profile: 0x000A (CD-RW) 
BraseroWodim stdout: Profile: 0x0009 (CD-R) (current)
BraseroWodim stdout: Profile: 0x0008 (CD-ROM) 
BraseroWodim stdout: Profile: 0x0002 (Removable disk) 
BraseroWodim stdout: Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
BraseroWodim stdout: Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
BraseroWodim stdout: Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
BraseroWodim stdout: Drive buf size : 1867008 = 1823 KB
BraseroWodim stdout: FIFO size      : 16777216 = 16384 KB
BraseroWodim stderr: Speed set to 2823 KB/s
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: data   693 MB        
BraseroWodim stdout: Total size:      796 MB (78:57.49) = 355312 sectors
BraseroWodim stdout: Lout start:      797 MB (78:59/37) = 355312 sectors
BraseroWodim stdout: Current Secsize: 2048
BraseroWodim stdout: ATIP info from disk:
BraseroWodim stdout:   Indicated writing power: 7
BraseroWodim stdout:   Is not unrestricted
BraseroWodim stdout:   Is not erasable
BraseroWodim stdout:   ATIP start of lead in:  -11597 (97:27/28)
BraseroWodim stdout:   ATIP start of lead out: 359849 (79:59/74)
BraseroWodim stdout: Disk type:    Short strategy type (Phthalocyanine or similar)
BraseroWodim stdout: Manuf. index: 20
BraseroWodim stdout: Manufacturer: Princo Corporation
BraseroWodim stdout: Blocks total: 359849 Blocks current: 359849 Blocks remaining: 4537
BraseroWodim stdout: Forcespeed is OFF.
BraseroWodim stdout: Starting to write CD/DVD at speed  16.0 in dummy SAO mode for single session.
BraseroWodim stdout: Last chance to quit, starting dummy write in    4 seconds.
BraseroWodim called brasero_job_set_dangerous
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    3 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    2 seconds.
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout: 
BraseroWodim stdout:    1 seconds.   0 seconds. Operation starts.
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stderr: wodim: CUE sheet not accepted. Retrying with minimum pregapsize = 1.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Sending CUE sheet...
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_set_current_action
BraseroWodim stderr: Errno: 5 (Input/output error), send_cue_sheet scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB:  5D 00 00 00 00 00 00 00 20 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Writing  time:    0.040s
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: BURN-Free was never needed.
BraseroWodim stderr: Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: HUP
BraseroWodim stderr: Sense Key: 0x5 Illegal Request, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid) 
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 0.002s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: CUE sheet still not accepted. Please try to write in RAW (-raw96r) mode.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Cannot send CUE sheet.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Could not write Lead-in.
BraseroWodim called brasero_job_get_flags
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
	error		= 12
	message	= "Възникна грешка при записването на диска"
BraseroWodim stopping
BraseroWodim got killed
Session error : Възникна грешка при записването на диска (brasero_burn_record burn.c:2599)

ProblemType: Bug
Architecture: i386
DistroRelease: Ubuntu 9.04
ExecutablePath: /usr/bin/brasero
Package: brasero 2.26.1-0ubuntu1
ProcEnviron:
 LANG=bg_BG.UTF-8
 SHELL=/bin/bash
SourcePackage: brasero
Uname: Linux 2.6.28-15-generic i686

** Affects: brasero (Ubuntu)
     Importance: Undecided
         Status: New


** Tags: apport-bug i386

-- 
BraseroWodim asked to stop because of an error 	error		= 12
https://bugs.launchpad.net/bugs/432644
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to brasero in ubuntu.

More information about the Ubuntu-burning mailing list