[Bug 465035] Re: ISO burn silently causes input/output error and end of medium

Fri Oct 30 17:39:14 GMT 2009

A bit of investigation and the sacrifice of one blank CD for the greater
ubuntu good later, it looks a lot like the errors are being caused by
the default burn mode:

cdrecord defaults to SAO mode: Works.
wodim defaults to TAO mode: Fails.
wodim forced to use SAO mode: Works.

The behaviour is described here:

http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=427771
http://lists.alioth.debian.org/pipermail/debburn-devel/2009-July/000661.html

Looks like the consensus is that it just happens with TAO mode and these
disks have some bad blocks at the end, so they should be padded (are the
ubuntu isos?!) and we have to live with it. I'd rather be able to copy
the image back to hd and do an md5 of the drive, however.

Further logs attached to show the modes (I leave out the probable fail
case of cdrecord running in TAO):

Wodim, by default, seems to run in TAO mode and fails
-----------------------------------------------------

rich at neon:~/Source/cdrtools-2.01.01$ wodim -scanbus
scsibus3:
	3,0,0	300) 'ATAPI   ' 'DVD A  DH20A1S  ' 'UX14' Removable CD-ROM
	3,1,0	301) *
	3,2,0	302) *
	3,3,0	303) *
	3,4,0	304) *
	3,5,0	305) *
	3,6,0	306) *
	3,7,0	307) *
scsibus6:
	6,0,0	600) *
	6,1,0	601) 'TOSHIBA ' 'DVD-ROM SD-R5002' '1031' Removable CD-ROM
	6,2,0	602) *
	6,3,0	603) *
	6,4,0	604) *
	6,5,0	605) *
	6,6,0	606) *
	6,7,0	607) *
rich at neon:~/Source/cdrtools-2.01.01$ wodim -v speed=1 dev=3,0,0 /home/rich/Downloads/ubuntu-9.10-desktop-i386.iso 
wodim: No write mode specified.
wodim: Asuming -tao mode.
wodim: Future versions of wodim may have different drive dependent defaults.
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '3,0,0'
scsibus: 3 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'ATAPI   '
Identification : 'DVD A  DH20A1S  '
Revision       : 'UX14'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 988416 = 965 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size      : 12582912 = 12288 KB
Track 01: data   689 MB        
Total size:      792 MB (78:30.24) = 353268 sectors
Lout start:      792 MB (78:32/18) = 353268 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 6578
Forcespeed is OFF.
Speed set to 2822 KB/s
Starting to write CD/DVD at speed  16.0 in real TAO mode for single session.
Last chance to quit, starting real write in    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:  689 of  689 MB written (fifo 100%) [buf  99%]  16.9x.
Track 01: Total bytes read/written: 723488768/723488768 (353266 sectors).
Writing  time:  310.504s
Average write speed  15.8x.
Min drive buffer fill was 98%
Fixating...
Fixating time:   19.522s
BURN-Free was never needed.
wodim: fifo had 11396 puts and 11396 gets.
wodim: fifo was 0 times empty and 11188 times full, min fill was 97%.
rich at neon:~/Source/cdrtools-2.01.01$ md5sum /dev/scd0 
md5sum: /dev/scd0: Input/output error
rich at neon:~/Source/cdrtools-2.01.01$ dd if=/dev/scd0 of=/home/rich/test.iso
dd: Lesen von ‚Äû/dev/scd0‚Äú: Input/output error
1412832+0 Datens√§tze ein
1412832+0 Datens√§tze aus
723369984 Bytes (723 MB) kopiert, 152,204 s, 4,8 MB/s

Now we specify to use SAO mode and suddenly things start working
----------------------------------------------------------------

rich at neon:~/Source/cdrtools-2.01.01$ wodim -v -sao speed=1 dev=3,0,0 /home/rich/Downloads/ubuntu-9.10-desktop-i386.iso 
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '3,0,0'
scsibus: 3 target: 0 lun: 0
WARNING: the deprecated pseudo SCSI syntax found as device specification.
Support for that may cease in the future versions of wodim. For now,
the device will be mapped to a block device file where possible.
Run "wodim --devices" for details.
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'ATAPI   '
Identification : 'DVD A  DH20A1S  '
Revision       : 'UX14'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0012 (DVD-RAM) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 988416 = 965 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
FIFO size      : 12582912 = 12288 KB
Track 01: data   689 MB        
Total size:      792 MB (78:30.21) = 353266 sectors
Lout start:      792 MB (78:32/16) = 353266 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type A, high Beta category (A+) (3)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359846 (79:59/71)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359846 Blocks current: 359846 Blocks remaining: 6580
Forcespeed is OFF.
Speed set to 2822 KB/s
Starting to write CD/DVD at speed  16.0 in real SAO mode for single session.
Last chance to quit, starting real write in    0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:  689 of  689 MB written (fifo 100%) [buf  99%]  16.9x.
Track 01: Total bytes read/written: 723488768/723488768 (353266 sectors).
Writing  time:  315.241s
Average write speed  15.5x.
Min drive buffer fill was 99%
Fixating...
Fixating time:    6.819s
BURN-Free was never needed.
wodim: fifo had 11396 puts and 11396 gets.
wodim: fifo was 0 times empty and 11198 times full, min fill was 97%.

rich at neon:~/Source/cdrtools-2.01.01$ dd if=/dev/scd0 of=/home/rich/test.iso
1413064+0 Datens√§tze ein
1413064+0 Datens√§tze aus
723488768 Bytes (723 MB) kopiert, 135,412 s, 5,3 MB/s
rich at neon:~/Source/cdrtools-2.01.01$ md5sum /dev/scd0 8790491bfa9d00f283ed9dd2d77b3906  /dev/scd0
rich at neon:~/Source/cdrtools-2.01.01$ 

** Bug watch added: Debian Bug tracker #427771
   http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=427771

-- 
ISO burn silently causes input/output error and end of medium
https://bugs.launchpad.net/bugs/465035
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to cdrkit in ubuntu.