[Bug 487792] [NEW] Al comenzar la grabación cdrecord dió error 254

Tue Nov 24 20:00:53 GMT 2009

Public bug reported:

Binary package hint: k3b

Devices
-----------------------
HL-DT-ST DVD-RAM GSA-H22N 1.00 (/dev/sr0, CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL) [DVD-ROM, DVD-R secuencial, DVD-R Doble capa secuencial, DVD-R doble capa salteado, DVD-RAM, DVD-RW sobrescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobrescritura restringida, Salto de capa] [%7]

K3b::DataTrackReader
-----------------------
reading sectors 0 to 36144 with sector size 2056. Length: 36145 sectors, 74314120 bytes.
using buffer size of 32 blocks.
Read a total of 36145 sectors (74314120 bytes)
reading sectors 47547 to 61416 with sector size 2056. Length: 13870 sectors, 28516720 bytes.
using buffer size of 32 blocks.
Read a total of 13870 sectors (28516720 bytes)

System
-----------------------
K3b Version: 1.68.0
KDE Version: 4.3.2 (KDE 4.3.2)
QT Version:  4.5.2
Kernel:      2.6.31-15-generic

Used versions
-----------------------
cdrecord: 1.1.9

cdrecord
-----------------------
scsidev: '/dev/sr0'
devname: '/dev/sr0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.9
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 3 = CD-ROM XA mode 2
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'HL-DT-ST'
Identification : 'DVD-RAM GSA-H22N'
Revision       : '1.00'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0016 (DVD-R/DL layer jump recording) 
Profile: 0x0015 (DVD-R/DL sequential recording) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1114112 = 1088 KB
Drive DMA Speed: 81660 kB/s 463x CD 58x DVD
FIFO size      : 12582912 = 12288 KB
Speed set to 8468 KB/s
Track 01: data    70 MB        
Total size:       81 MB (08:01.96) = 36147 sectors
Lout start:       81 MB (08:03/72) = 36147 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 5
  Is not unrestricted
  Is not erasable
  Disk sub type: Medium Type B, low Beta category (B-) (4)
  ATIP start of lead in:  -11607 (97:27/18)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 18
Manufacturer: Plasmon Data systems Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 323702
Starting to write CD/DVD at speed  48.0 in real TAO mode for multi session.
Last chance to quit, starting real write in    2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01:    0 of   70 MB written.
Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
CDB:  2A 00 00 00 00 00 00 00 1F 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 00 00 00
Sense Key: 0x7 Data Protect, Segment 11
Sense Code: 0x00 Qual 0x00 (no additional sense information) Fru 0x0
Sense flags: Blk 0 (not valid) end of medium 
cmd finished after 7.586s timeout 40s
/usr/bin/wodim: A write error occured.
/usr/bin/wodim: Please properly read the error message above.
write track data: error after 0 bytes
Writing  time:   15.348s
Average write speed  31.5x.
Fixating...
Fixating time:   16.247s
/usr/bin/wodim: fifo had 191 puts and 1 gets.
/usr/bin/wodim: fifo was 0 times empty and 0 times full, min fill was 100%.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/sr0 speed=48 -tao driveropts=burnfree -multi -xa1 /tmp/kde-eduardo/050428_1338/Track01.iso

ProblemType: Bug
Architecture: amd64
Date: Tue Nov 24 16:57:00 2009
DistroRelease: Ubuntu 9.10
ExecutablePath: /usr/bin/k3b
NonfreeKernelModules: nvidia
Package: k3b 1.68.0~alpha3-0ubuntu1
ProcEnviron:
 LANG=es_AR.UTF-8
 SHELL=/bin/bash
ProcVersionSignature: Ubuntu 2.6.31-15.50-generic
SourcePackage: k3b
Uname: Linux 2.6.31-15-generic x86_64
XsessionErrors: (polkit-gnome-authentication-agent-1:1833): GLib-CRITICAL **: g_once_init_leave: assertion `initialization_value != 0' failed

** Affects: k3b (Ubuntu)
     Importance: Undecided
         Status: New

** Tags: amd64 apport-bug

-- 
Al comenzar la grabación cdrecord dió error 254
https://bugs.launchpad.net/bugs/487792
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to k3b in ubuntu.