[Bug 290778] [NEW] 8.10: wodim not burning CD media (DVD is ok & cdrecord works)

[Robbie Williamson]

Public bug reported:

Binary package hint: wodim

When attempting to burn an iso image or blank a CD-RW on my Thinkpad X301 laptop, I receive the following error:
     wodim: Probably trying to use ultra high speed medium on improper writer.
-----------------------------------------------------------------------------------
$ wodim --version
Cdrecord-yelling-line-to-tell-frontends-to-use-it-like-version 2.01.01a03-dvd 
Wodim 1.1.8
Copyright (C) 2006 Cdrkit suite contributors
Based on works from Joerg Schilling, Copyright (C) 1995-2006, J. Schilling
-----------------------------------------------------------------------------------


Here is the verbose output from doing a 'sudo wodim -v blank=fast' on a CD-RW:
-----------------------------------------------------------------------------------
$ sudo wodim -v blank=fast
TOC Type: 1 = CD-ROM
wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.Device was not specified. Trying to find an appropriate drive...
Detected CD-R drive: /dev/cdrw
Using /dev/cdrom of unknown capabilities
scsidev: '/dev/cdrom'
devname: '/dev/cdrom'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.8
Driveropts: 'burnfree'
SCSI buffer size: 64512
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'MATSHITA'
Identification : 'DVD-RAM UJ-844  '
Revision       : 'RC02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x000A (CD-RW)
Profile: 0x0012 (DVD-RAM) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) (current)
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 1
  Reference speed: 0
  Is not unrestricted
  Is erasable
  Disk sub type: Ultra High speed Rewritable media (2)
  ATIP start of lead in:  -11076 (97:34/24)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low: 16 1T speed high: 16
  2T speed low:  8 2T speed high: 24
  power mult factor: 4 5
  recommended erase/write power: 1
  A1 values: 66 4A 99
  A2 values: 38 80 00
  A3 values: 04 C4 A0
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Speed set to 1764 KB/s
wodim: Probably trying to use ultra high speed medium on improper writer.
$ 
-----------------------------------------------------------------------------------

Here is the working output from the exact same command using the latest compiled version of 'cdrecord' from cdrtools-2.01.01/ :
-----------------------------------------------------------------------------------
$ sudo ./cdrecord -v blank=fast
[sudo] password for robbiew: 
Cdrecord-ProDVD-ProBD-Clone 2.01.01a53 (i686-pc-linux-gnu) Copyright (C) 1995-2008 J�rg Schilling
TOC Type: 1 = CD-ROM
Linux sg driver version: 3.5.34
Using libscg version 'schily-0.9'.
SCSI buffer size: 32768
No target specified, trying to find one...
Using dev=1,0,0.
atapi: 1
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'MATSHITA'
Identifikation : 'DVD-RAM UJ-844  '
Revision       : 'RC02'
Device seems to be: Generic mmc2 DVD-R/DVD-RW/DVD-RAM.
Current: CD-RW
Profile: DVD-RAM 
Profile: DVD+R 
Profile: DVD+RW 
Profile: DVD-RW restricted overwrite 
Profile: DVD-RW sequential recording 
Profile: DVD-R sequential recording 
Profile: DVD-ROM 
Profile: CD-RW (current)
Profile: CD-R 
Profile: CD-ROM (current)
Profile: Removable Disk 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO
Drive buf size : 1310720 = 1280 KB
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 1
  Reference speed: 0
Disk Is not unrestricted
Disk Is erasable
  Disk sub type: Ultra High speed Rewritable media (2)
  ATIP start of lead in:  -11076 (97:34/24)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low: 16 1T speed high: 16
  2T speed low:  8 2T speed high: 24
  power mult factor: 4 5
  recommended erase/write power: 1
  A1 values: 66 4A 99
  A2 values: 38 80 00
  A3 values: 04 C4 A0
Disk type:    Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation

    Capacity  Blklen/Sparesz.  Format-type  Type
      357796             2048         0x00  Formatted Media
      359849             2048         0x00  Reserved (0)
      359849              256         0x10  Reserved (0)
Starting to write CD/DVD/BD at speed 10 in real BLANK mode for single session.
Last chance to quit, starting real write    0 seconds. Operation starts.
Performing OPC...
Blanking PMA, TOC, pregap
Blanking time:   19.631s
$ 
------------------------------------------------------------------------------------------------------

Blanking and burning DVD-RWs work fine.

** Affects: cdrkit (Ubuntu)
     Importance: Undecided
         Status: New

-- 
8.10: wodim not burning CD media (DVD is ok & cdrecord works)
https://bugs.launchpad.net/bugs/290778
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to cdrkit in ubuntu.