[Bug 250206] Re: k3b after burning a DVD the drive fails to respond

sponix2ipfw sponix2ipfw at yahoo.com
Sun Jul 20 04:20:12 BST 2008


** Description changed:

  Binary package hint: k3b
  
  After Burning a DVD the drive fails to respond, the OS can no longer
  access the drive, to eject, read, etc. It is no longer listed in
  cdrecord -scanbus, and so forth. This does not happen when burning a DVD
- with Brasero...
+ with Brasero... Seems someone else had a similar problem
+ http://www.timhardy.net/wordpress/bytopic/howto/ and was able to
+ establish a work-a-round, I have not been able to verify this the
+ directions are a bit vague.
  
  Description:    Ubuntu 8.04.1
  
  k3b:
    Installed: 1.0.4-2ubuntu4
  
  Jul 19 22:38:30 sponix-desktop syslogd 1.5.0#1ubuntu1: restart.
  Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618030]          cdb 28 00 00 00 00 10 00 00  01 00 00 00 00 00 00 00
  Jul 19 22:55:11 sponix-desktop kernel: [ 8899.618031]          res 40/00:02:00:48:00/00:00:00:00:00/a0 Emask 0x4 (timeout)
  Jul 19 22:55:17 sponix-desktop kernel: [ 8902.163838] ata4: port is slow to respond, please be patient (Status 0xd0)
  Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402328] ata4: device not ready (errno=-16), forcing hardreset
  Jul 19 22:55:21 sponix-desktop kernel: [ 8904.402335] ata4: hard resetting link
  Jul 19 22:55:27 sponix-desktop kernel: [ 8907.026670] ata4: port is slow to respond, please be patient (Status 0x80)
  Jul 19 22:55:31 sponix-desktop kernel: [ 8909.184761] ata4: hard resetting link
  Jul 19 22:55:37 sponix-desktop kernel: [ 8911.809084] ata4: port is slow to respond, please be patient (Status 0x80)
  Jul 19 22:55:42 sponix-desktop kernel: [ 8913.966706] ata4: hard resetting link
  Jul 19 22:55:47 sponix-desktop kernel: [ 8916.591037] ata4: port is slow to respond, please be patient (Status 0x80)
  Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278603] ata4: limiting SATA link speed to 1.5 Gbps
  Jul 19 22:56:17 sponix-desktop kernel: [ 8931.278606] ata4: hard resetting link
  Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663156] ata4.00: disabled
  Jul 19 22:56:22 sponix-desktop kernel: [ 8933.663169] ata4: EH complete
  
  sudo lspci -v
  00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0
  	Capabilities: [44] HyperTransport: Slave or Primary Interface
  	Capabilities: [dc] HyperTransport: MSI Mapping
  
  00:01.0 ISA bridge: nVidia Corporation MCP61 LPC Bridge (rev a2)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0
  
  00:01.1 SMBus: nVidia Corporation MCP61 SMBus (rev a2)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: 66MHz, fast devsel, IRQ 255
  	I/O ports at fc00 [size=64]
  	I/O ports at 1c00 [size=64]
  	I/O ports at f400 [size=64]
  	Capabilities: [44] Power Management version 2
  
  00:01.2 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a2)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: 66MHz, fast devsel
  
  00:02.0 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 10 [OHCI])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
  	Memory at fe02f000 (32-bit, non-prefetchable) [size=4K]
  	Capabilities: [44] Power Management version 2
  
  00:02.1 USB Controller: nVidia Corporation MCP61 USB Controller (rev a3) (prog-if 20 [EHCI])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
  	Memory at fe02e000 (32-bit, non-prefetchable) [size=256]
  	Capabilities: [44] Debug port
  	Capabilities: [80] Power Management version 2
  
  00:04.0 PCI bridge: nVidia Corporation MCP61 PCI bridge (rev a1) (prog-if 01 [Subtractive decode])
  	Flags: bus master, 66MHz, fast devsel, latency 0
  	Bus: primary=00, secondary=01, subordinate=01, sec-latency=32
  	I/O behind bridge: 0000b000-0000bfff
  	Memory behind bridge: fd800000-fd8fffff
  	Prefetchable memory behind bridge: fdf00000-fdffffff
  	Capabilities: [b8] Subsystem: nVidia Corporation Unknown device cb84
  	Capabilities: [8c] HyperTransport: MSI Mapping
  
  00:05.0 Audio device: nVidia Corporation MCP61 High Definition Audio (rev a2)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 17
  	Memory at fe024000 (32-bit, non-prefetchable) [size=16K]
  	Capabilities: [44] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/0 Enable-
  	Capabilities: [6c] HyperTransport: MSI Mapping
  
  00:06.0 IDE interface: nVidia Corporation MCP61 IDE (rev a2) (prog-if 8a [Master SecP PriP])
  	Subsystem: Unknown device f03c:2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0
  	[virtual] Memory at 000001f0 (32-bit, non-prefetchable) [disabled] [size=8]
  	[virtual] Memory at 000003f0 (type 3, non-prefetchable) [disabled] [size=1]
  	[virtual] Memory at 00000170 (32-bit, non-prefetchable) [disabled] [size=8]
  	[virtual] Memory at 00000370 (type 3, non-prefetchable) [disabled] [size=1]
  	I/O ports at f000 [size=16]
  	Capabilities: [44] Power Management version 2
  
  00:07.0 Bridge: nVidia Corporation MCP61 Ethernet (rev a2)
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 220
  	Memory at fe02d000 (32-bit, non-prefetchable) [size=4K]
  	I/O ports at ec00 [size=8]
  	Capabilities: [44] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask+ 64bit+ Queue=0/3 Enable+
  	Capabilities: [6c] HyperTransport: MSI Mapping
  
  00:08.0 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
  	I/O ports at 09f0 [size=8]
  	I/O ports at 0bf0 [size=4]
  	I/O ports at 0970 [size=8]
  	I/O ports at 0b70 [size=4]
  	I/O ports at d800 [size=16]
  	Memory at fe02c000 (32-bit, non-prefetchable) [size=4K]
  	Capabilities: [44] Power Management version 2
  	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
  	Capabilities: [cc] HyperTransport: MSI Mapping
  
  00:08.1 IDE interface: nVidia Corporation MCP61 SATA Controller (rev a2) (prog-if 85 [Master SecO PriO])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 20
  	I/O ports at 09e0 [size=8]
  	I/O ports at 0be0 [size=4]
  	I/O ports at 0960 [size=8]
  	I/O ports at 0b60 [size=4]
  	I/O ports at c400 [size=16]
  	Memory at fe02b000 (32-bit, non-prefetchable) [size=4K]
  	Capabilities: [44] Power Management version 2
  	Capabilities: [b0] Message Signalled Interrupts: Mask- 64bit+ Queue=0/2 Enable-
  	Capabilities: [cc] HyperTransport: MSI Mapping
  
  00:09.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  	Flags: bus master, fast devsel, latency 0
  	Bus: primary=00, secondary=02, subordinate=02, sec-latency=0
  	I/O behind bridge: 0000a000-0000afff
  	Memory behind bridge: fde00000-fdefffff
  	Prefetchable memory behind bridge: 00000000fdd00000-00000000fddfffff
  	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
  	Capabilities: [48] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
  	Capabilities: [60] HyperTransport: MSI Mapping
  	Capabilities: [80] Express Root Port (Slot+) IRQ 0
  
  00:0b.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  	Flags: bus master, fast devsel, latency 0
  	Bus: primary=00, secondary=03, subordinate=03, sec-latency=0
  	I/O behind bridge: 00009000-00009fff
  	Memory behind bridge: fdc00000-fdcfffff
  	Prefetchable memory behind bridge: 00000000fdb00000-00000000fdbfffff
  	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
  	Capabilities: [48] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
  	Capabilities: [60] HyperTransport: MSI Mapping
  	Capabilities: [80] Express Root Port (Slot+) IRQ 0
  
  00:0c.0 PCI bridge: nVidia Corporation MCP61 PCI Express bridge (rev a2) (prog-if 00 [Normal decode])
  	Flags: bus master, fast devsel, latency 0
  	Bus: primary=00, secondary=04, subordinate=04, sec-latency=0
  	I/O behind bridge: 00008000-00008fff
  	Memory behind bridge: fda00000-fdafffff
  	Prefetchable memory behind bridge: 00000000fd900000-00000000fd9fffff
  	Capabilities: [40] Subsystem: nVidia Corporation Unknown device 0000
  	Capabilities: [48] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/1 Enable+
  	Capabilities: [60] HyperTransport: MSI Mapping
  	Capabilities: [80] Express Root Port (Slot+) IRQ 0
  
  00:0d.0 VGA compatible controller: nVidia Corporation GeForce 6100 nForce 430 (rev a2) (prog-if 00 [VGA controller])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, 66MHz, fast devsel, latency 0, IRQ 16
  	Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
  	Memory at e0000000 (64-bit, prefetchable) [size=256M]
  	Memory at fc000000 (64-bit, non-prefetchable) [size=16M]
  	[virtual] Expansion ROM at 88000000 [disabled] [size=128K]
  	Capabilities: [48] Power Management version 2
  	Capabilities: [50] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0 Enable-
  
  00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration
  	Flags: fast devsel
  	Capabilities: [80] HyperTransport: Host or Secondary Interface
  
  00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map
  	Flags: fast devsel
  
  00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller
  	Flags: fast devsel
  
  00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control
  	Flags: fast devsel
  	Capabilities: [f0] #0f [0010]
  
  01:05.0 Ethernet controller: ADMtek NC100 Network Everywhere Fast Ethernet 10/100 (rev 11)
  	Subsystem: ADMtek Unknown device 0574
  	Flags: bus master, medium devsel, latency 255, IRQ 19
  	I/O ports at bc00 [size=256]
  	Memory at fd8ff000 (32-bit, non-prefetchable) [size=1K]
  	[virtual] Expansion ROM at fdf00000 [disabled] [size=128K]
  	Capabilities: [c0] Power Management version 2
  
  01:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
  	Subsystem: Hewlett-Packard Company Unknown device 2a61
  	Flags: bus master, stepping, medium devsel, latency 64, IRQ 21
  	Memory at fd8fe000 (32-bit, non-prefetchable) [size=2K]
  	I/O ports at b800 [size=128]
  	Capabilities: [50] Power Management version 2
  
  
  ProblemType: Bug
  Architecture: i386
  Date: Sat Jul 19 22:24:51 2008
  DistroRelease: Ubuntu 8.04
  NonfreeKernelModules: nvidia
  Package: k3b 1.0.4-2ubuntu4
  PackageArchitecture: i386
  ProcEnviron:
   SHELL=/bin/bash
   PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games
   LANG=en_US.UTF-8
  SourcePackage: k3b
  Uname: Linux 2.6.24-19-generic i686

-- 
k3b after burning a DVD the drive fails to respond
https://bugs.launchpad.net/bugs/250206
You received this bug notification because you are a member of Ubuntu
Burning Team, which is subscribed to k3b in ubuntu.



More information about the Ubuntu-burning mailing list