[Bug 135283] Re: image doesnt burn

[flebber]

Maybe a bit more information would be helpful. Not sure id this is a K3b
error or a CDrecord error. Cannot burn iso images to any medium CD-R or
CD-RW on either of my 2 burner drives and have used multiple iso images.
Here is the last output from k3b when erroring on verification. Saved
full log and added as attachment.

System
-----------------------
K3b Version: 1.0.3

KDE Version: 3.5.8
QT Version:  3.3.7
Kernel:      2.6.22-14-generic
Devices
-----------------------
IOMEGA CDRW64896INT-B 6OS2 (/dev/scd1, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]

HL-DT-ST DVDRAM GSA-H10A JL03 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-R Dual Layer Sequential, DVD-R Dual Layer Jump, DVD-RAM, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]
K3bDataTrackReader
-----------------------
reading sectors 0 to 346644 with sector size 2048. Length: 346645 sectors, 709928960 bytes.
using buffer size of 64 blocks.
Problem while reading. Retrying from sector 2112.
Read error in sector 2126.
Read a total of 2112 sectors (4325376 bytes)

Used versions
-----------------------
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/scd1'
devname: '/dev/scd1'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'IOMEGA  '
Identification : 'CDRW64896INT-B  '
Revision       : '6OS2'
Device seems to be: Generic mmc CD-RW.
Current: 0x000A (CD-RW)
Profile: 0x000A (CD-RW) (current)
Profile: 0x0009 (CD-R) 
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1422080 = 1388 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 2112 KB/s
Track 01: data   677 MB        
Total size:      777 MB (77:01.93) = 346645 sectors
Lout start:      777 MB (77:03/70) = 346645 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 3
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11635 (97:26/65)
  ATIP start of lead out: 359849 (79:59/74)
  1T speed low:  4 1T speed high: 10
  2T speed low:  4 2T speed high:  0 (reserved val  6)
  power mult factor: 1 5
  recommended erase/write power: 3
  A1 values: 24 1A BC
  A2 values: 26 B2 26
Disk type:    Phase change
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 13204
Forcespeed is OFF.
Starting to write CD/DVD at speed  12.0 in real SAO mode for single session.



** Attachment added: "isoerror.txt"
   http://launchpadlibrarian.net/11852934/isoerror.txt

-- 
image doesnt burn
https://bugs.launchpad.net/bugs/135283
You received this bug notification because you are a member of Ubuntu
Burning Team, which is a bug contact for k3b in ubuntu.