[Bug 114758] Re: k3b error when writing and verifying DVDs using slimline drive

[pauls]

here's the debug output from a burn, fwiw:

System
-----------------------
K3b Version: 1.0.3

KDE Version: 3.5.8
QT Version:  3.3.7
Kernel:      2.6.22-14-generic
Devices
-----------------------
TSSTcorp DVD+-RW TS-L632D DE03 (/dev/scd0, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD-R DL, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R Sequential, DVD-RW Restricted Overwrite, DVD-RW Sequential, DVD+RW, DVD+R, DVD+R Dual Layer, CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Restricted Overwrite, Layer Jump]

Used versions
-----------------------
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'TSSTcorp'
Identification : 'DVD+-RW TS-L632D'
Revision       : 'DE03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Current: 0x0009 (CD-R)
Profile: 0x002B (DVD+R/DL) 
Profile: 0x001B (DVD+R) 
Profile: 0x001A (DVD+RW) 
Profile: 0x0014 (DVD-RW sequential recording) 
Profile: 0x0013 (DVD-RW restricted overwrite) 
Profile: 0x0011 (DVD-R sequential recording) 
Profile: 0x0010 (DVD-ROM) 
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1633280 = 1595 KB
FIFO size      : 12582912 = 12288 KB
Speed set to 4234 KB/s
Track 01: data   697 MB        
Total size:      800 MB (79:21.33) = 357100 sectors
Lout start:      801 MB (79:23/25) = 357100 sectors
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 4
  Is unrestricted
  Is not erasable
  Disk sub type: Medium Type A, low Beta category (A-) (2)
  ATIP start of lead in:  -11634 (97:26/66)
  ATIP start of lead out: 359849 (79:59/74)
Disk type:    Short strategy type (Phthalocyanine or similar)
Manuf. index: 3
Manufacturer: CMC Magnetics Corporation
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 2749
Starting to write CD/DVD at speed  24.0 in real SAO mode for single session.
Last chance to quit, starting real write in  2 seconds.
   1 seconds.
   0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Sending CUE sheet...
Writing pregap for track 1 at -150
Starting new track at sector: 0
Track 01:    0 of  697 MB written.
Track 01:    1 of  697 MB written (fifo 100%) [buf 100%]   0.4x.

< snipped >

Track 01:  697 of  697 MB written (fifo 100%) [buf 100%]  25.4x.
Track 01: Total bytes read/written: 731340800/731340800 (357100 sectors).
Writing  time:  285.183s
Average write speed  17.1x.
Min drive buffer fill was 97%
Fixating...
Fixating time:   24.706s
/usr/bin/wodim: fifo had 11520 puts and 11520 gets.
/usr/bin/wodim: fifo was 0 times empty and 10622 times full, min fill was 97%.
BURN-Free was never needed.

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=24 -dao driveropts=burnfree -overburn -data -tsize=357100s -

-- 
k3b error when writing and verifying DVDs using slimline drive
https://bugs.launchpad.net/bugs/114758
You received this bug notification because you are a member of Ubuntu
Burning Team, which is a bug contact for k3b in ubuntu.