[Bug 178808] (Gutsy) K3b won't burn - wodim error

[odin]

Public bug reported:

Binary package hint: k3b

Every time I try to burn a CD, the writing never starts and I get the
following error:  /usr/bin/wodim: Operation not permitted. Warning:
Cannot raise RLIMIT_MEMLOCK limits.  The CD won't unmount and I have to
reboot to get the CD Tray to open.

System
-----------------------
K3b Version: 1.0.3

KDE Version: 3.5.8
QT Version:  3.3.7
Kernel:      2.6.22-14-generic
Devices
-----------------------
CyberDrv CW078D CD-R/RW 150E (/dev/scd0, ) [CD-R, CD-RW, CD-ROM] [CD-ROM, CD-R, CD-RW] [SAO, TAO, RAW, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R]

HL-DT-ST DVD-ROM GDR8161B 0040 (/dev/scd1, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [None]
Used versions
-----------------------
cdrecord: 1.1.6

cdrecord
-----------------------
/usr/bin/wodim: Operation not permitted. Warning: Cannot raise RLIMIT_MEMLOCK limits.
scsidev: '/dev/scd0'
devname: '/dev/scd0'
scsibus: -2 target: -2 lun: -2
Linux sg driver version: 3.5.27
Wodim version: 1.1.6
SCSI buffer size: 64512
Beginning DMA speed test. Set CDR_NODMATEST environment variable if device
communication breaks or freezes immediately after that.
Errno: 5 (Input/output error), read buffer scsi sendcmd: no error
CDB:  3C 00 00 00 00 00 00 FC 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 72 0B 47 00 00 00 00 0E 09 0C 00 00 00 02 00 00
Sense Key: 0x7 Data Protect, Segment 11
Sense Code: 0x00 Qual 0x02 (end-of-partition/medium detected) Fru 0x0
Sense flags: Blk 0 (not valid) end of medium 
cmd finished after 154.067s timeout 200s
TOC Type: 1 = CD-ROM
Driveropts: 'burnfree'
Device type    : Removable CD-ROM
Version        : 5
Response Format: 2
Capabilities   : 
Vendor_info    : 'CyberDrv'
Identification : 'CW078D CD-R/RW  '
Revision       : '150E'
Device seems to be: Generic mmc CD-RW.
Current: 0x0009 (CD-R)
Profile: 0x000A (CD-RW) 
Profile: 0x0009 (CD-R) (current)
Profile: 0x0008 (CD-ROM) 
Profile: 0x0002 (Removable disk) 
Using generic SCSI-3/mmc   CD-R/CD-RW driver (mmc_cdr).
Driver flags   : MMC-2 SWABAUDIO BURNFREE 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
Drive buf size : 1806336 = 1764 KB
FIFO size      : 12582912 = 12288 KB
/usr/bin/wodim: Cannot load media.
/usr/bin/wodim: Cannot eject media.
Track 01: data   115 MB        
Total size:      132 MB (13:05.62) = 58922 sectors
Lout start:      132 MB (13:07/47) = 58922 sectors

cdrecord command:
-----------------------
/usr/bin/wodim -v gracetime=2 dev=/dev/scd0 speed=40 -dao driveropts=burnfree -eject -overburn -data -tsize=58922s -

** Affects: k3b (Ubuntu)
     Importance: Undecided
         Status: New

-- 
(Gutsy) K3b won't burn - wodim error
https://bugs.launchpad.net/bugs/178808
You received this bug notification because you are a member of Ubuntu
Burning Team, which is a bug contact for k3b in ubuntu.