Unable to mount location when on wireless

[Roderick Burkhardt]

The subnets are all the same, I have want through the router configuration
several times looking for anything that could be different from when it is
wired up. I have compared all the configurations to my wired desktop. ips
are good the subnets are the same.

Roderick

On Tue, Feb 8, 2011 at 6:43 AM, Mathieu Trudel-Lapierre <mathieu.tl@
gmail.com> wrote:

> On Tue, Feb 8, 2011 at 9:22 AM, Roderick Burkhardt <rburkhardt at gmail.com>
> wrote:
> [...]
> > I have restored the smb.conf files and many times after make many modes
> to
> > it, but it only seems to have this issue when we have the two computers
> on
> > wireless. On the wired network I had no problem getting this to come up
> > correctly, I can open up the windows network over a wired connection and
> see
> > every computer that is on in the house.
>
> I can't think of a reason why wireless would behave any differently
> than wired for samba, unless you have additional settings in place to
> shield wifi clients from each other, or if they end up on different
> subnets, or something like that. Bottom line is, the only way I can
> think of is that this is due to configuration on your wireless
> network, so you may want to check your router.
>
> You should also be able to tell this in different ways, such as if the
> IP is very different (subnet differs; like in 192.168.1.100 vs.
> 192.168.2.101), if the netmask (starts with 255 normally) is something
> "bigger" than 255.255.255.0 (e.g. 255.255.255.254 could be
> problematic).
>
> Anyone has better ideas?
>
> Mathieu Trudel-Lapierre <mathieu.tl at gmail.com>
> Freenode: cyphermox, Jabber: mathieu.tl at gmail.com
> 4096R/EE018C93 1967 8F7D 03A1 8F38 732E  FF82 C126 33E1 EE01 8C93
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/ubuntu-bugsquad/attachments/20110208/127d4ed2/attachment.html>