[Ubuntu-BR] Configurar a placa de captura tv

[Jussara&Afonso]

Ola a todos.

Instalei o Ubuntu 8.10 amd64 e não estou conseguindo fazer a minha placa
pixel View funcionar.

Eu utilizava ela no Fedora com o comando modprobe bttv card=37  tuner=2
radio=1 e funcionava de primeira.


No ubuntu, configurando o arquivo /etc/modprobe/bttv, o sistema
reconhece a placa:

lspci:

05:02.0 Multimedia video controller: Brooktree Corporation Bt878 Video
Capture (rev 11)
    Flags: bus master, medium devsel, latency 64, IRQ 18
    Memory at f8ffe000 (32-bit, prefetchable) [size=4K]
    Capabilities: <access denied>
    Kernel driver in use: bttv
    Kernel modules: bttv

05:02.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture
(rev 11)
    Flags: bus master, medium devsel, latency 64, IRQ 5
    Memory at f8fff000 (32-bit, prefetchable) [size=4K]
    Capabilities: <access denied>


/etc/modprobe.d$ dmesg | grep bttv
[   12.264687] bttv: driver version 0.9.17 loaded
[   12.264690] bttv: using 8 buffers with 2080k (520 pages) each for capture
[   12.283481] bttv: Bt8xx card found (0).
[   12.283494] bttv 0000:05:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[   12.283502] bttv0: Bt878 (rev 17) at 0000:05:02.0, irq: 18, latency:
64, mmio: 0xf8ffe000
[   12.283511] bttv0: using: Prolink PixelView PlayTV pro
[card=37,insmod option]
[   12.283536] bttv0: gpio: en=00000000, out=00000000 in=00ffc0ff [init]
[   12.283586] bttv0: tuner type=2
[   12.283588] bttv0: i2c: checking for TDA9875 @ 0xb0... not found
[   12.284198] bttv0: i2c: checking for TDA7432 @ 0x8a... not found
[   12.530063] bttv0: registered device video0
[   12.530084] bttv0: registered device vbi0
[   12.530104] bttv0: registered device radio0
[   12.530123] bttv0: PLL: 28636363 => 35468950 .. ok
[  259.263365] bttv0: PLL can sleep, using XTAL (28636363).

Mas o sistema não cria o /dev/radio0 e o /dev/video0

O comando ./MAKEDEV
root em Cerberus:/dev# ./MAKEDEV /dev/radio radio
udev active, devices will be created in /dev/.static/dev/
./MAKEDEV: don't know how to make device "/dev/radio"

Como devo proceder?
Grato Afonso.