[Ubuntu-BR] [HELP]Não enxergo micros da rede!!!

Raphael Menezes raphaelm em gmail.com
Quarta Junho 13 19:01:20 UTC 2007


Engracado. Tenho o mesmo problema a empresa.
Porem aqui estou usando suse ( :((((( ) . Nao consigo autenticar na intranet
do banco com linux e nem ver as outras maquinas. Acontece o msm, can't
display all contents! Estarei atento a este topico :)

On 6/13/07, Alan <alanfrank69 em gmail.com> wrote:
>
> Fala, bacana! E aí?
> Bom, achei estranho pq não tava achando nenhum dos micros em windows,
> dae iniciei o outro no linux e consegui encontrá-lo pelo findsmb, o
> mais estranho eh q o resultado do findsmb executado no outro pc com
> linux também não enxerga o windows, mas indo em Locais>Rede o windows
> aparece!
>
> resultado do findsmb:
>
>                                 *=DMB
>                                 +=LMB
> IP ADDR         NETBIOS NAME     WORKGROUP/OS/VERSION
> ---------------------------------------------------------------------
> 192.168.1.8     ALAN-PC       +[MSHOME] [Unix] [Samba 3.0.24]
> 192.168.1.69    GUSTAVO-PC     [MSHOME] [Unix] [Samba 3.0.24]
>
>
> brigadão ae pela atenção!
> 2007/6/13, Eduardo Gomes Jr. <eduardo em rio-tech.com.br>:
> > Fala Sr Alan, tudo tranquilo?
> >
> > Vc, provavelmente está em um rede NetBIOS, certo?
> > Vc consegue enxergar a galera usando o comando findsmb?
> >
> > # findsmb
> >
> > Se não aparecer o pessoal, verifique o firewall e o serviço mensageiro
> nos
> > rWindow$ da vida...
> > Normalmente é só isso.
> >
> > Outro detalhe: Vc consegue montar os dispositivos deles em sua máquina?
> >
> > #mount //<IP>/<compartilhamento> /mnt/<pasta> -t smbfs
> >
> > Vamo vê se a gente consegue matar o problema...
> >
> > Atenciosamente
> >
> > Eduardo Gomes Junior - Tecnologia da Informação
> > Rio-Tech Engenharia Eletrometalurgia e Projetos ltda
> >
> > ----- Original Message -----
> > From: "Alan" <alanfrank69 em gmail.com>
> > To: <ubuntu-br em lists.ubuntu.com>
> > Sent: Wednesday, June 13, 2007 12:44 AM
> > Subject: [Ubuntu-BR] [HELP]Não enxergo micros da rede!!!
> >
> >
> > Não consigo enxergar nenhum pc da rede!
> >
> > Minha rede é assim:
> > ALAN-PC => Meu PC soh com UBUNTU
> > GUSTAVO-PC => PC com Windows VISTA e UBUNTU
> > MANEH-PC => PC com Windows XP e Windows VISTA
> >
> > Todos micros se enxergam e comunicam entre si, inclusive com minha
> > máquina!!! Mas não enxergo nenhum deles indo em Locais>Rede também não
> > consegui também digitando "smb://nomedopc" no nautilus.
> >
> > Muito estranho, já que todos me acessam, em todos sistemas
> > operacionais e conseguem, inclusive, leitura e escrita das minhas
> > pastas compartilhadas, somente eu não vejo nada, não importa qual SO
> > seja!
> >
> > Alguém tem idéia do que está faltando?
> >
> > Vou postar o conteúdo do meu smb.conf e o resultado do comando smbtree
> > logo abaixo:
> >
> >
> ============================================================================
> > Conteúdo do meu smb.conf:
> > #
> > # Sample configuration file for the Samba suite for Debian GNU/Linux.
> > #
> > #
> > # This is the main Samba configuration file. You should read the
> > # smb.conf(5) manual page in order to understand the options listed
> > # here. Samba has a huge number of configurable options most of which
> > # are not shown in this example
> > #
> > # Any line which starts with a ; (semi-colon) or a # (hash)
> > # is a comment and is ignored. In this example we will use a #
> > # for commentary and a ; for parts of the config file that you
> > # may wish to enable
> > #
> > # NOTE: Whenever you modify this file you should run the command
> > # "testparm" to check that you have not made any basic syntactic
> > # errors.
> > #
> >
> > #======================= Global Settings =======================
> >
> > [global]
> >
> > ## Browsing/Identification ###
> >
> > # Change this to the workgroup/NT-domain name your Samba server will
> part of
> >    workgroup = MSHOME
> >
> > # server string is the equivalent of the NT Description field
> >    server string = %h server (Samba, Ubuntu)
> >
> > # Windows Internet Name Serving Support Section:
> > # WINS Support - Tells the NMBD component of Samba to enable its WINS
> Server
> > ;   wins support = no
> >
> > # WINS Server - Tells the NMBD components of Samba to be a WINS Client
> > # Note: Samba can be either a WINS Server, or a WINS Client, but NOT
> both
> > ;   wins server = w.x.y.z
> >
> > # This will prevent nmbd to search for NetBIOS names through DNS.
> >    dns proxy = no
> >
> > # What naming service and in what order should we use to resolve host
> names
> > # to IP addresses
> > ;   name resolve order = lmhosts host wins bcast
> >
> > #### Networking ####
> >
> > # The specific set of interfaces / networks to bind to
> > # This can be either the interface name or an IP address/netmask;
> > # interface names are normally preferred
> > ;   interfaces = 127.0.0.0/8 eth0
> >
> > # Only bind to the named interfaces and/or networks; you must use the
> > # 'interfaces' option above to use this.
> > # It is recommended that you enable this feature if your Samba machine
> is
> > # not protected by a firewall or is a firewall itself.  However, this
> > # option cannot handle dynamic or non-broadcast interfaces correctly.
> > ;   bind interfaces only = true
> >
> >
> >
> > #### Debugging/Accounting ####
> >
> > # This tells Samba to use a separate log file for each machine
> > # that connects
> >    log file = /var/log/samba/log.%m
> >
> > # Put a capping on the size of the log files (in Kb).
> >    max log size = 1000
> >
> > # If you want Samba to only log through syslog then set the following
> > # parameter to 'yes'.
> > ;   syslog only = no
> >
> > # We want Samba to log a minimum amount of information to syslog.
> Everything
> > # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to
> log
> > # through syslog you should set the following parameter to something
> higher.
> >    syslog = 0
> >
> > # Do something sensible when Samba crashes: mail the admin a backtrace
> >    panic action = /usr/share/samba/panic-action %d
> >
> >
> > ####### Authentication #######
> >
> > # "security = user" is always a good idea. This will require a Unix
> account
> > # in this server for every user accessing the server. See
> > # /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
> > # in the samba-doc package for details.
> > security = share
> >
> > # You may wish to use password encryption.  See the section on
> > # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
> >    encrypt passwords = true
> >
> > # If you are using encrypted passwords, Samba will need to know what
> > # password database type you are using.
> >    passdb backend = tdbsam
> >
> >    obey pam restrictions = yes
> >
> > ;   guest account = nobody
> >    invalid users = root
> >
> > # This boolean parameter controls whether Samba attempts to sync the
> Unix
> > # password with the SMB password when the encrypted SMB password in the
> > # passdb is changed.
> > ;   unix password sync = no
> >
> > # For Unix password sync to work on a Debian GNU/Linux system, the
> following
> > # parameters must be set (thanks to Ian Kahan
> > <<kahan em informatik.tu-muenchen.de> for
> > # sending the correct chat script for the passwd program in Debian
> Sarge).
> >    passwd program = /usr/bin/passwd %u
> >    passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
> > *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully*
> > .
> >
> > # This boolean controls whether PAM will be used for password changes
> > # when requested by an SMB client instead of the program listed in
> > # 'passwd program'. The default is 'no'.
> > ;   pam password change = no
> >
> > ########## Domains ###########
> >
> > # Is this machine able to authenticate users. Both PDC and BDC
> > # must have this setting enabled. If you are the BDC you must
> > # change the 'domain master' setting to no
> > #
> > ;   domain logons = yes
> > #
> > # The following setting only takes effect if 'domain logons' is set
> > # It specifies the location of the user's profile directory
> > # from the client point of view)
> > # The following required a [profiles] share to be setup on the
> > # samba server (see below)
> > ;   logon path = \\%N\profiles\%U
> > # Another common choice is storing the profile in the user's home
> directory
> > ;   logon path = \\%N\%U\profile
> >
> > # The following setting only takes effect if 'domain logons' is set
> > # It specifies the location of a user's home directory (from the client
> > # point of view)
> > ;   logon drive = H:
> > ;   logon home = \\%N\%U
> >
> > # The following setting only takes effect if 'domain logons' is set
> > # It specifies the script to run during logon. The script must be stored
> > # in the [netlogon] share
> > # NOTE: Must be store in 'DOS' file format convention
> > ;   logon script = logon.cmd
> >
> > # This allows Unix users to be created on the domain controller via the
> SAMR
> > # RPC pipe.  The example command creates a user account with a disabled
> Unix
> > # password; please adapt to your needs
> > ; add user script = /usr/sbin/adduser --quiet --disabled-password
> --gecos ""
> > %u
> >
> > ########## Printing ##########
> >
> > # If you want to automatically load your printer list rather
> > # than setting them up individually then you'll need this
> > ;   load printers = yes
> >
> > # lpr(ng) printing. You may wish to override the location of the
> > # printcap file
> > ;   printing = bsd
> > ;   printcap name = /etc/printcap
> >
> > # CUPS printing.  See also the cupsaddsmb(8) manpage in the
> > # cupsys-client package.
> > ;   printing = cups
> > ;   printcap name = cups
> >
> > # When using [print$], root is implicitly a 'printer admin', but you can
> > # also give this right to other users to add drivers and set printer
> > # properties
> > ;   printer admin = @lpadmin
> >
> >
> > ############ Misc ############
> >
> > # Using the following line enables you to customise your configuration
> > # on a per machine basis. The %m gets replaced with the netbios name
> > # of the machine that is connecting
> > ;   include = /home/samba/etc/smb.conf.%m
> >
> > # Most people will find that this option gives better performance.
> > # See smb.conf(5) and
> > /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
> > # for details
> > # You may want to add the following on a Linux system:
> > #         SO_RCVBUF=8192 SO_SNDBUF=8192
> >    socket options = TCP_NODELAY
> >
> > # The following parameter is useful only if you have the linpopup
> package
> > # installed. The samba maintainer and the linpopup maintainer are
> > # working to ease installation and configuration of linpopup and samba.
> > ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s'
> &
> >
> > # Domain Master specifies Samba to be the Domain Master Browser. If this
> > # machine will be configured as a BDC (a secondary logon server), you
> > # must set this to 'no'; otherwise, the default behavior is recommended.
> > ;   domain master = auto
> >
> > # Some defaults for winbind (make sure you're not using the ranges
> > # for something else.)
> > ;   idmap uid = 10000-20000
> > ;   idmap gid = 10000-20000
> > ;   template shell = /bin/bash
> >
> > #======================= Share Definitions =======================
> >
> > # Un-comment the following (and tweak the other settings below to suit)
> > # to enable the default home directory shares.  This will share each
> > # user's home directory as \\server\username
> > ;[homes]
> > ;   comment = Home Directories
> > ;   browseable = no
> >
> > # By default, \\server\username shares can be connected to by anyone
> > # with access to the samba server.  Un-comment the following parameter
> > # to make sure that only "username" can connect to \\server\username
> > ;   valid users = %S
> >
> > # By default, the home directories are exported read-only. Change next
> > # parameter to 'yes' if you want to be able to write to them.
> > ;   writable = no
> >
> > # File creation mask is set to 0600 for security reasons. If you want to
> > # create files with group=rw permissions, set next parameter to 0664.
> > ;   create mask = 0600
> >
> > # Directory creation mask is set to 0700 for security reasons. If you
> want
> > to
> > # create dirs. with group=rw permissions, set next parameter to 0775.
> > ;   directory mask = 0700
> >
> > # Un-comment the following and create the netlogon directory for Domain
> > Logons
> > # (you need to configure Samba to act as a domain controller too.)
> > ;[netlogon]
> > ;   comment = Network Logon Service
> > ;   path = /home/samba/netlogon
> > ;   guest ok = yes
> > ;   writable = no
> > ;   share modes = no
> >
> > # Un-comment the following and create the profiles directory to store
> > # users profiles (see the "logon path" option above)
> > # (you need to configure Samba to act as a domain controller too.)
> > # The path below should be writable by all users so that their
> > # profile directory may be created the first time they log on
> > ;[profiles]
> > ;   comment = Users profiles
> > ;   path = /home/samba/profiles
> > ;   guest ok = no
> > ;   browseable = no
> > ;   create mask = 0600
> > ;   directory mask = 0700
> >
> > wins support = no
> > [printers]
> >    comment = All Printers
> >    browseable = no
> >    path = /var/spool/samba
> >    printable = yes
> >    public = no
> >    writable = no
> >    create mode = 0700
> >
> > # Windows clients look for this share name as a source of downloadable
> > # printer drivers
> > [print$]
> >    comment = Printer Drivers
> >    path = /var/lib/samba/printers
> >    browseable = yes
> >    read only = yes
> >    guest ok = no
> > # Uncomment to allow remote administration of Windows print drivers.
> > # Replace 'ntadmin' with the name of the group your admin users are
> > # members of.
> > ;   write list = root, @ntadmin
> >
> > # A sample share for sharing your CD-ROM with others.
> > ;[cdrom]
> > ;   comment = Samba server's CD-ROM
> > ;   writable = no
> > ;   locking = no
> > ;   path = /cdrom
> > ;   public = yes
> >
> > # The next two parameters show how to auto-mount a CD-ROM when the
> > # cdrom share is accesed. For this to work /etc/fstab must contain
> > # an entry like this:
> > #
> > #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
> > #
> > # The CD-ROM gets unmounted automatically after the connection to the
> > #
> > # If you don't want to use auto-mounting/unmounting make sure the CD
> > # is mounted on /cdrom
> > #
> > ;   preexec = /bin/mount /cdrom
> > ;   postexec = /bin/umount /cdrom
> >
> >
> > [Arquivos Antigos]
> > path = /media/sdb1/Arquivos Antigos
> > available = yes
> > browsable = yes
> > public = yes
> > writable = yes
> >
> ==============================================================================
> >
> > Resultado de quando digito smbtree no terminal:
> > WORKGROUP
> > \\GUSTAVO-PC
> > \\GUSTAVO-PC\utorrent
> > \\GUSTAVO-PC\Users
> > \\GUSTAVO-PC\Public
> > \\GUSTAVO-PC\Músicas
> > \\GUSTAVO-PC\Jogos
> > \\GUSTAVO-PC\IPC$ IPC remoto
> > \\GUSTAVO-PC\Downloads
> > \\GUSTAVO-PC\D$ Recurso compartilhado padrão
> > \\GUSTAVO-PC\D
> > \\GUSTAVO-PC\Conversores
> > \\GUSTAVO-PC\C$ Recurso compartilhado padrão
> > \\GUSTAVO-PC\ADMIN$ Administração remota
> > MSHOME
> > \\MANEH-PC
> > cli_start_connection: failed to connect to MANEH-PC<20> (0.0.0.0)
> > \\ALAN-PC alan-pc server (Samba, Ubuntu)
> > \\ALAN-PC\IPC$ IPC Service (alan-pc server (Samba, Ubuntu))
> > \\ALAN-PC\Arquivos Antigos
> > \\ALAN-PC\print$ Printer Drivers
> >
> >
> ============================================================================
> >
> > Muito Obrigado!
> >
> > --
> > Interessado em aprender mais sobre o Ubuntu em português?
> > http://wiki.ubuntu-br.org/ComeceAqui  -
> > ubuntu-br mailing list
> > ubuntu-br em lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> >
> >
> > --
> > Interessado em aprender mais sobre o Ubuntu em português?
> > http://wiki.ubuntu-br.org/ComeceAqui  -
> > ubuntu-br mailing list
> > ubuntu-br em lists.ubuntu.com
> > https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
> >
>
> --
> Interessado em aprender mais sobre o Ubuntu em português?
> http://wiki.ubuntu-br.org/ComeceAqui  -
> ubuntu-br mailing list
> ubuntu-br em lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>



More information about the ubuntu-br mailing list