[Ubuntu-BR] Sem som na HP Pavilion br2024br
Mauro Matos
maurohc.matos em gmail.com
Sábado Abril 21 04:46:10 UTC 2007
2007/4/20, Mauro Matos <maurohc.matos em gmail.com>:
> Pessoal, obrigado pelas respostas.
>
> Acabei de instalar a versão final do Kubuntu 7.04, fiz uma nova
> instalação sem formatar a partição com o /home. Mas ainda nada de som.
> Segue mais detalhes de configuração:
>
>
> $ cat /etc/modprobe.d/alsa-base
> # autoloader aliases
> install sound-slot-0 /sbin/modprobe snd-card-0
> install sound-slot-1 /sbin/modprobe snd-card-1
> install sound-slot-2 /sbin/modprobe snd-card-2
> install sound-slot-3 /sbin/modprobe snd-card-3
> install sound-slot-4 /sbin/modprobe snd-card-4
> install sound-slot-5 /sbin/modprobe snd-card-5
> install sound-slot-6 /sbin/modprobe snd-card-6
> install sound-slot-7 /sbin/modprobe snd-card-7
>
> # Cause optional modules to be loaded above generic modules
> install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && {
> /sbin/modprobe -Qb snd-ioctl32 ; : ; }
> install snd-pcm /sbin/modprobe --ignore-install snd-pcm $CMDLINE_OPTS
> && { /sbin/modprobe -Qb snd-pcm-oss ; : ; }
> install snd-mixer /sbin/modprobe --ignore-install snd-mixer
> $CMDLINE_OPTS && { /sbin/modprobe --Qb snd-mixer-oss ; : ; }
> install snd-seq /sbin/modprobe --ignore-install snd-seq $CMDLINE_OPTS
> && { /sbin/modprobe -Qb snd-seq-midi ; /sbin/modprobe --quiet
> snd-seq-oss ; : ; }
>
> # Cause optional modules to be loaded above sound card driver modules
> install snd-emu10k1 /sbin/modprobe --ignore-install snd-emu10k1
> $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-emu10k1-synth ; }
> install snd-via82xx /sbin/modprobe --ignore-install snd-via82xx
> $CMDLINE_OPTS && { /sbin/modprobe -Qb snd-seq ; }
>
> # Load saa7134-alsa instead of saa7134 (which gets dragged in by it anyway)
> install saa7134 /sbin/modprobe --ignore-install saa7134 $CMDLINE_OPTS
> && { /sbin/modprobe -Qb saa7134-alsa ; : ; }
>
> # Load snd-seq for devices that don't have hardware midi;
> # Ubuntu #26283, #43682, #56005; works around Ubuntu #34831 for
> # non-Creative Labs PCI hardware
> install snd /sbin/modprobe --ignore-install snd $CMDLINE_OPTS && {
> /sbin/modprobe -Qb snd-seq ; }
> # Prevent abnormal drivers from grabbing index 0
> options snd-bt87x index=-2
> options cx88-alsa index=-2
> options saa7134-alsa index=-2
> options snd-atiixp-modem index=-2
> options snd-intel8x0m index=-2
> options snd-via82xx-modem index=-2
> options snd-usb-audio index=-2
> options snd-usb-usx2y index=-2
> # Ubuntu #62691, enable MPU for snd-cmipci
> options snd-cmipci mpu_port=0x330 fm_port=0x388
>
> options snd-hda-intel model=auto
>
>
> $ lsmod | grep snd
> snd_hda_intel 21912 1
> snd_hda_codec 205440 1 snd_hda_intel
> snd_pcm_oss 44544 0
> snd_mixer_oss 17408 1 snd_pcm_oss
> snd_pcm 79876 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
> snd_seq_dummy 4740 0
> snd_seq_oss 32896 0
> snd_seq_midi 9600 0
> snd_rawmidi 25472 1 snd_seq_midi
> snd_seq_midi_event 8448 2 snd_seq_oss,snd_seq_midi
> snd_seq 52592 6
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_seq_midi_event
> snd_timer 23684 2 snd_pcm,snd_seq
> snd_seq_device 9100 5
> snd_seq_dummy,snd_seq_oss,snd_seq_midi,snd_rawmidi,snd_seq
> snd 54020 12
> snd_hda_intel,snd_hda_codec,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_seq_oss,snd_rawmidi,snd_seq,snd_timer,snd_seq_device
> soundcore 8672 1 snd
> snd_page_alloc 10888 2 snd_hda_intel,snd_pcm
>
> $ lspci -vv
> 00:00.0 Host bridge: ATI Technologies Inc Radeon Xpress 200 Host Bridge (rev 01)
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ >SERR- <PERR-
> Latency: 64
> Region 3: Memory at <ignored> (64-bit, non-prefetchable)
>
> 00:01.0 PCI bridge: ATI Technologies Inc RS480 PCI Bridge (prog-if 00
> [Normal decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 99
> Bus: primary=00, secondary=01, subordinate=01, sec-latency=68
> I/O behind bridge: 0000e000-0000efff
> Memory behind bridge: fde00000-fdefffff
> Prefetchable memory behind bridge: d0000000-dfffffff
> Secondary status: 66MHz+ FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B-
> Capabilities: <access denied>
>
> 00:12.0 IDE interface: ATI Technologies Inc ATI 4379 Serial ATA
> Controller (rev 80) (prog-if 8f [Master SecP SecO PriP PriO])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 20
> Region 0: I/O ports at ff00 [size=8]
> Region 1: I/O ports at fe00 [size=4]
> Region 2: I/O ports at fd00 [size=8]
> Region 3: I/O ports at fc00 [size=4]
> Region 4: I/O ports at fb00 [size=16]
> Region 5: Memory at fdfff000 (32-bit, non-prefetchable) [size=512]
> [virtual] Expansion ROM at 20000000 [disabled] [size=512K]
> Capabilities: <access denied>
>
> 00:13.0 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80) (prog-if 10 [OHCI])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 128 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at fdffe000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:13.1 USB Controller: ATI Technologies Inc IXP SB400 USB Host
> Controller (rev 80) (prog-if 10 [OHCI])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 128 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at fdffd000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:13.2 USB Controller: ATI Technologies Inc IXP SB400 USB2 Host
> Controller (rev 80) (prog-if 20 [EHCI])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 128 bytes
> Interrupt: pin A routed to IRQ 19
> Region 0: Memory at fdffc000 (32-bit, non-prefetchable) [size=4K]
> Capabilities: <access denied>
>
> 00:14.0 SMBus: ATI Technologies Inc IXP SB400 SMBus Controller (rev 82)
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Region 0: I/O ports at 0500 [size=16]
> Region 1: Memory at fdffb000 (32-bit, non-prefetchable) [size=1K]
>
> 00:14.1 IDE interface: ATI Technologies Inc Standard Dual Channel PCI
> IDE Controller ATI (rev 80) (prog-if 82 [Master PriP])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Interrupt: pin A routed to IRQ 18
> Region 0: I/O ports at 01f0 [size=8]
> Region 1: I/O ports at 03f4 [size=1]
> Region 2: I/O ports at 0170 [size=8]
> Region 3: I/O ports at 0374 [size=1]
> Region 4: I/O ports at f900 [size=16]
> Capabilities: <access denied>
>
> 00:14.2 Audio device: ATI Technologies Inc SB450 HDA Audio (rev 01)
> Subsystem: Micro-Star International Co., Ltd. Unknown device 725a
> Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort-
> <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64, Cache Line Size: 32 bytes
> Interrupt: pin ? routed to IRQ 18
> Region 0: Memory at fdff4000 (64-bit, non-prefetchable) [size=16K]
> Capabilities: <access denied>
>
> 00:14.3 ISA bridge: ATI Technologies Inc IXP SB400 PCI-ISA Bridge (rev 80)
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 0
>
> 00:14.4 PCI bridge: ATI Technologies Inc IXP SB400 PCI-PCI Bridge (rev
> 80) (prog-if 01 [Subtractive decode])
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop+
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap- 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64
> Bus: primary=00, secondary=02, subordinate=02, sec-latency=64
> I/O behind bridge: 0000d000-0000dfff
> Memory behind bridge: fdd00000-fddfffff
> Prefetchable memory behind bridge: fdc00000-fdcfffff
> Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort+ <SERR- <PERR-
> BridgeCtl: Parity- SERR- NoISA- VGA- MAbort- >Reset- FastB2B-
>
> 01:05.0 VGA compatible controller: ATI Technologies Inc RC410 [Radeon
> Xpress 200] (prog-if 00 [VGA])
> Subsystem: Micro-Star International Co., Ltd. Unknown device 7254
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (2000ns min), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 3
> Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M]
> Region 1: I/O ports at ee00 [size=256]
> Region 2: Memory at fdef0000 (32-bit, non-prefetchable) [size=64K]
> [virtual] Expansion ROM at fde00000 [disabled] [size=128K]
> Capabilities: <access denied>
>
> 02:01.0 Modem: Motorola Unknown device 3052 (rev 04) (prog-if 00 [Generic])
> Subsystem: Motorola Unknown device 3020
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping+ SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (250ns min, 15500ns max), Cache Line Size: 32 bytes
> Interrupt: pin A routed to IRQ 16
> Region 0: Memory at fddff000 (32-bit, non-prefetchable) [size=4K]
> Region 1: I/O ports at de00 [size=256]
> Capabilities: <access denied>
>
> 02:03.0 Ethernet controller: Realtek Semiconductor Co., Ltd.
> RTL-8139/8139C/8139C+ (rev 10)
> Subsystem: Micro-Star International Co., Ltd. Unknown device 254c
> Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop-
> ParErr- Stepping- SERR- FastB2B-
> Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium
> >TAbort- <TAbort- <MAbort- >SERR- <PERR-
> Latency: 64 (8000ns min, 16000ns max)
> Interrupt: pin A routed to IRQ 17
> Region 0: I/O ports at dc00 [size=256]
> Region 1: Memory at fddfe000 (32-bit, non-prefetchable) [size=256]
> Capabilities: <access denied>
>
>
> Tela do alsamixer:
> -----------------------
> ┌─────────────────────────────────────────────────[AlsaMixer v1.0.13
> (Press Escape to
> quit)]─────────────────────────────────────────────────┐
> │ Card: HDA ATI SB
>
> │
> │ Chip: Realtek ALC861-VD
>
> │
> │ View: [Playback] Capture All
>
> │
> │ Item: Headphone
>
> │
> │
>
> │
> │
>
> │
> │
>
> │
> │
>
> │
> │
>
> │
> │
>
> │
> │ ┌──┐ ┌──┐ ┌──┐
> ┌──┐ ┌──┐ ┌──┐
> │
> │ │▒▒│ │ │ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │ │ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │ │ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│
> │
> │ │▒▒│ │▒▒│ │▒▒│
> │ │ │▒▒│ │▒▒│ Front Mi
> │
> │ ┌──┐ └──┘ ├──┤ ├──┤
> ├──┤ ├──┤ ├──┤
> │
> │ │OO│ │OO│ │OO│
> │OO│ │OO│ │OO│
> │
> │ └──┘ └──┘ └──┘
> └──┘ └──┘ └──┘
> │
> │ 100<>100 81<>81 100<>100
> 0<>0 100<>100 100<>100
> │
> │ <Headphon> PCM Front Front Mi
> Line CD Mic Input So
> │
> │
>
> │
> │
>
> │
> │
>
> │
> │
>
> │
> └────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
>
> Um detalhe, no alsamixer eu não consigo algerar o Headphon.
>
> --
> Mauro Matos
>
Obrigado ao Gustavo Lago, Flávio Pontes e Duda Nogueira pelas
participações e colaborações.
A solução que encontrei foi colocar a seguinte linha no final do
arquivo /etc/modprobe.d/alsa-base:
options snd-hda-intel model=3stack
Em seguida reiniciar a máquina.
No entanto o controle de volume do kmix (painel do KDE), está
associado ao PC Speak (informação obtida no alsamixer), não produz
nenhum efeito ao volume de som. Quando conseguir resolver isso, posto
aqui.
Se alguém souber como resolver o problema acima, por favor informe.
Maiores informações sobre outras opções vocês encontram no arquivo
/usr/share/doc/alsa-base/driver/ALSA-Configuration.txt.gz do pacote
alsa-base.
--
Mauro Matos
More information about the ubuntu-br
mailing list