[Ubuntu-BR] Feisty ainda com problemas
antonio martins
acmartinsjr em gmail.com
Sábado Abril 21 00:36:14 UTC 2007
O cdrom é sony, já com cinco anos de bons serviços prestados mas
funcionando bem nos outros sistemas instalados. Segue o dmesg:
martins em martins-desktop:~$ dmesg
[ 0.000000] Linux version 2.6.20-15-generic (root em palmer) (gcc version
4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Sun Apr 15 07:36:31 UTC 2007 (Ubuntu
2.6.20-15.27-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size:
000000000008f000 end: 000000000008f000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000008f000 size:
0000000000011000 end: 00000000000a0000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e0000 size:
0000000000020000 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size:
000000003e555000 end: 000000003e655000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003e655000 size:
0000000000111000 end: 000000003e766000 type: 4
[ 0.000000] copy_e820_map() start: 000000003e766000 size:
0000000000e17000 end: 000000003f57d000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f57d000 size:
0000000000008000 end: 000000003f585000 type: 2
[ 0.000000] copy_e820_map() start: 000000003f585000 size:
00000000000a8000 end: 000000003f62d000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f62d000 size:
0000000000004000 end: 000000003f631000 type: 2
[ 0.000000] copy_e820_map() start: 000000003f631000 size:
0000000000077000 end: 000000003f6a8000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f6a8000 size:
0000000000041000 end: 000000003f6e9000 type: 4
[ 0.000000] copy_e820_map() start: 000000003f6e9000 size:
0000000000009000 end: 000000003f6f2000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f6f2000 size:
000000000000d000 end: 000000003f6ff000 type: 3
[ 0.000000] copy_e820_map() start: 000000003f6ff000 size:
0000000000001000 end: 000000003f700000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000003f700000 size:
0000000000900000 end: 0000000040000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fff80000 size:
0000000000080000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000008f000 (usable)
[ 0.000000] BIOS-e820: 000000000008f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000003e655000 (usable)
[ 0.000000] BIOS-e820: 000000003e655000 - 000000003e766000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003e766000 - 000000003f57d000 (usable)
[ 0.000000] BIOS-e820: 000000003f57d000 - 000000003f585000 (reserved)
[ 0.000000] BIOS-e820: 000000003f585000 - 000000003f62d000 (usable)
[ 0.000000] BIOS-e820: 000000003f62d000 - 000000003f631000 (reserved)
[ 0.000000] BIOS-e820: 000000003f631000 - 000000003f6a8000 (usable)
[ 0.000000] BIOS-e820: 000000003f6a8000 - 000000003f6e9000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000003f6e9000 - 000000003f6f2000 (usable)
[ 0.000000] BIOS-e820: 000000003f6f2000 - 000000003f6ff000 (ACPI data)
[ 0.000000] BIOS-e820: 000000003f6ff000 - 000000003f700000 (usable)
[ 0.000000] BIOS-e820: 000000003f700000 - 0000000040000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
[ 0.000000] 119MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000fe200
[ 0.000000] Entering add_active_range(0, 0, 259840) 0 entries of 256
used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 259840
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 259840
[ 0.000000] On node 0 totalpages: 259840
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 238 pages used for memmap
[ 0.000000] HighMem zone: 30226 pages, LIFO batch:7
[ 0.000000] DMI 2.4 present.
[ 0.000000] ACPI: RSDP (v000 INTEL ) @
0x000fe020
[ 0.000000] ACPI: RSDT (v001 INTEL D946GZIS 0x0000002f
0x01000013) @ 0x3f6fd038
[ 0.000000] ACPI: FADT (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6fc000
[ 0.000000] ACPI: MADT (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6f6000
[ 0.000000] ACPI: WDDT (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6f5000
[ 0.000000] ACPI: MCFG (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6f4000
[ 0.000000] ACPI: ASF! (v032 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6f3000
[ 0.000000] ACPI: HPET (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x3f6f2000
[ 0.000000] ACPI: DSDT (v001 INTEL D946GZIS 0x0000002f MSFT
0x01000013) @ 0x00000000
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:4 APIC version 20
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI
0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] ACPI: HPET id: 0x0 base: 0xfed00000
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 50000000 (gap:
40000000:bff80000)
[ 0.000000] Detected 3063.823 MHz processor.
[ 23.394605] Built 1 zonelists. Total pages: 257810
[ 23.394609] Kernel command line:
root=UUID=21352940-40e3-4e23-b3bd-6bbc6ba3cc36 ro single pci=routeirq
[ 23.394767] mapped APIC to ffffd000 (fee00000)
[ 23.394770] mapped IOAPIC to ffffc000 (fec00000)
[ 23.394773] Enabling fast FPU save and restore... done.
[ 23.394776] Enabling unmasked SIMD FPU exception support... done.
[ 23.394785] Initializing CPU#0
[ 23.394851] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 23.396688] Console: colour VGA+ 80x25
[ 23.402460] Dentry cache hash table entries: 131072 (order: 7, 524288
bytes)
[ 23.403137] Inode-cache hash table entries: 65536 (order: 6, 262144
bytes)
[ 23.423027] Memory: 1017668k/1039360k available (1992k kernel code,
19376k reserved, 893k data, 328k init, 120404k highmem)
[ 23.423155] virtual kernel memory layout:
[ 23.423156] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 23.423157] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 23.423158] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 23.423159] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 23.423160] .init : 0xc03d7000 - 0xc0429000 ( 328 kB)
[ 23.423161] .data : 0xc02f2264 - 0xc03d16d4 ( 893 kB)
[ 23.423162] .text : 0xc0100000 - 0xc02f2264 (1992 kB)
[ 23.423709] Checking if this processor honours the WP bit even in
supervisor mode... Ok.
[ 23.423988] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 23.424157] hpet0: 3 64-bit timers, 14318180 Hz
[ 23.425225] Using HPET for base-timer
[ 23.503933] Calibrating delay using timer specific routine.. 6132.94
BogoMIPS (lpj=12265892)
[ 23.504106] Security Framework v1.0.0 initialized
[ 23.504179] SELinux: Disabled at boot.
[ 23.504257] Mount-cache hash table entries: 512
[ 23.504471] CPU: After generic identify, caps: bfebfbff 20100000
00000000 00000000 0000651d 00000000 00000001
[ 23.504481] monitor/mwait feature present.
[ 23.504547] using mwait in idle threads.
[ 23.504616] CPU: Trace cache: 12K uops, L1 D cache: 16K
[ 23.504709] CPU: L2 cache: 256K
[ 23.504771] CPU: Hyper-Threading is disabled
[ 23.504836] CPU: After all inits, caps: bfebfbff 20100000 00000000
00003180 0000651d 00000000 00000001
[ 23.504847] Compat vDSO mapped to ffffe000.
[ 23.504914] Remapping vsyscall page to ffffe000
[ 23.504994] Checking 'hlt' instruction... OK.
[ 23.520066] SMP alternatives: switching to UP code
[ 23.520337] Freeing SMP alternatives: 11k freed
[ 23.520616] Early unpacking initramfs... done
[ 23.791513] ACPI: Core revision 20060707
[ 23.793213] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not
found, using machine DSDT.
[ 23.795815] CPU0: Intel(R) Celeron(R) CPU 3.06GHz stepping 09
[ 23.795974] Total of 1 processors activated (6132.94 BogoMIPS).
[ 23.796198] ENABLING IO-APIC IRQs
[ 23.796438] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 23.943651] Brought up 1 CPUs
[ 23.943970] Booting paravirtualized kernel on bare hardware
[ 23.944138] Time: 21:21:51 Date: 03/20/107
[ 23.944230] NET: Registered protocol family 16
[ 23.944409] EISA bus registered
[ 23.944477] ACPI: bus type pci registered
[ 23.947659] PCI: Using configuration type 1
[ 23.947724] Setting up standard PCI resources
[ 23.959819] ACPI: Interpreter enabled
[ 23.959889] ACPI: Using IOAPIC for interrupt routing
[ 23.960583] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 23.960663] PCI: Probing PCI hardware (bus 00)
[ 23.960687] ACPI: Assume root bridge [\_SB_.PCI0] bus is 0
[ 23.961989] Boot video device is 0000:00:02.0
[ 23.962501] PCI quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 23.962579] PCI quirk: region 0500-053f claimed by ICH6 GPIO
[ 23.963260] PCI: Transparent bridge - 0000:00:1e.0
[ 23.963395] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 23.967638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P32_._PRT]
[ 23.968546] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12)
[ 23.969145] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 9 10 11 12)
*0, disabled.
[ 23.969812] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 7 9 10 *11 12)
[ 23.970401] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 10 *11 12)
[ 23.971001] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 11 12)
*0, disabled.
[ 23.971725] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 9 10 *11 12)
[ 23.972328] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12)
[ 23.972918] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 7 9 *10 11 12)
[ 23.975072] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT]
[ 23.975457] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 23.975792] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT]
[ 23.977546] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 23.977633] pnp: PnP ACPI init
[ 23.981610] pnp: PnP ACPI: found 13 devices
[ 23.981684] PnPBIOS: Disabled by ACPI PNP
[ 23.981815] PCI: Using ACPI for IRQ routing
[ 23.981883] PCI: Routing PCI interrupts for all devices because
"pci=routeirq" specified
[ 23.981994] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 23.982122] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
-> IRQ 17
[ 23.982251] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low)
-> IRQ 18
[ 23.982378] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low)
-> IRQ 19
[ 23.982505] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low)
-> IRQ 20
[ 23.982632] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
-> IRQ 21
[ 23.982758] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
-> IRQ 20
[ 23.982885] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 19
[ 23.983012] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low)
-> IRQ 16
[ 23.983139] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
-> IRQ 21
[ 23.983267] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)
-> IRQ 19
[ 23.983393] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
-> IRQ 20
[ 23.983518] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low)
-> IRQ 20
[ 23.983696] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low)
-> IRQ 22
[ 23.983913] NET: Registered protocol family 8
[ 23.983979] NET: Registered protocol family 20
[ 23.984192] pnp: 00:06: ioport range 0x500-0x53f has been reserved
[ 23.984268] pnp: 00:06: ioport range 0x400-0x47f could not be reserved
[ 23.984342] pnp: 00:06: ioport range 0x680-0x6ff has been reserved
[ 23.984815] PCI: Ignore bogus resource 6 [0:0] of 0000:00:02.0
[ 23.985859] PCI: Bridge: 0000:00:1c.0
[ 23.985922] IO window: disabled.
[ 23.985987] MEM window: 50300000-503fffff
[ 23.986053] PREFETCH window: disabled.
[ 23.986119] PCI: Bridge: 0000:00:1c.2
[ 23.986182] IO window: disabled.
[ 23.986246] MEM window: 50400000-504fffff
[ 23.986312] PREFETCH window: disabled.
[ 23.986379] PCI: Bridge: 0000:00:1c.3
[ 23.986441] IO window: disabled.
[ 23.986506] MEM window: 50500000-505fffff
[ 23.986572] PREFETCH window: disabled.
[ 23.986639] PCI: Bridge: 0000:00:1e.0
[ 23.986702] IO window: 1000-1fff
[ 23.986767] MEM window: 50000000-500fffff
[ 23.986834] PREFETCH window: 50600000-506fffff
[ 23.986926] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low)
-> IRQ 18
[ 23.987054] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 23.987073] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low)
-> IRQ 19
[ 23.987201] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 23.987219] ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low)
-> IRQ 20
[ 23.987346] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 23.987358] PCI: Setting latency timer of device 0000:00:1e.0 to 64
[ 23.987389] NET: Registered protocol family 2
[ 24.023621] IP route cache hash table entries: 32768 (order: 5, 131072
bytes)
[ 24.023871] TCP established hash table entries: 131072 (order: 8,
1048576 bytes)
[ 24.024770] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 24.025273] TCP: Hash tables configured (established 131072 bind 65536)
[ 24.025356] TCP reno registered
[ 24.035697] checking if image is initramfs... it is
[ 24.561438] Freeing initrd memory: 6758k freed
[ 24.562070] audit: initializing netlink socket (disabled)
[ 24.562157] audit(1177104112.220:1): initialized
[ 24.562299] highmem bounce pool size: 64 pages
[ 24.562436] VFS: Disk quotas dquot_6.5.1
[ 24.562519] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 24.562644] io scheduler noop registered
[ 24.562733] io scheduler anticipatory registered
[ 24.562824] io scheduler deadline registered
[ 24.562920] io scheduler cfq registered (default)
[ 24.563399] PCI: Setting latency timer of device 0000:00:1c.0 to 64
[ 24.563447] assign_interrupt_mode Found MSI capability
[ 24.563519] Allocate Port Service[0000:00:1c.0:pcie00]
[ 24.563569] Allocate Port Service[0000:00:1c.0:pcie02]
[ 24.563685] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 24.563732] assign_interrupt_mode Found MSI capability
[ 24.563802] Allocate Port Service[0000:00:1c.2:pcie00]
[ 24.563845] Allocate Port Service[0000:00:1c.2:pcie02]
[ 24.563963] PCI: Setting latency timer of device 0000:00:1c.3 to 64
[ 24.564009] assign_interrupt_mode Found MSI capability
[ 24.564080] Allocate Port Service[0000:00:1c.3:pcie00]
[ 24.564125] Allocate Port Service[0000:00:1c.3:pcie02]
[ 24.564329] isapnp: Scanning for PnP cards...
[ 24.916137] isapnp: No Plug & Play device found
[ 24.993422] Real Time Clock Driver v1.12ac
[ 24.993555] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ
sharing enabled
[ 24.993798] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.995485] 00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 24.995983] mice: PS/2 mouse device common for all mice
[ 24.996742] RAMDISK driver initialized: 16 RAM disks of 65536K size
1024 blocksize
[ 24.997142] input: Macintosh mouse button emulation as
/class/input/input0
[ 24.997269] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 24.997345] ide: Assuming 33MHz system bus speed for PIO modes;
override with idebus=xx
[ 24.997688] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at
0x60,0x64 irq 1,12
[ 25.001027] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 25.001104] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 25.001376] EISA: Probing bus 0 at eisa.0
[ 25.001449] Cannot allocate resource for EISA slot 1
[ 25.001516] Cannot allocate resource for EISA slot 2
[ 25.001602] EISA: Detected 0 cards.
[ 25.031730] TCP cubic registered
[ 25.031798] NET: Registered protocol family 1
[ 25.031887] Using IPI No-Shortcut mode
[ 25.032044] ACPI: (supports S0 S3 S4 S5)
[ 25.032274] Magic number: 3:541:399
[ 25.032722] Freeing unused kernel memory: 328k freed
[ 25.034812] Time: tsc clocksource has been installed.
[ 25.047864] input: AT Translated Set 2 keyboard as /class/input/input1
[ 25.278607] Capability LSM initialized
[ 25.329005] ACPI: Processor [CPU0] (supports 8 throttling states)
[ 25.329138] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND,
Processor Device is not present [20060707]
[ 25.329305] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND,
Processor Device is not present [20060707]
[ 25.329467] ACPI Exception (acpi_processor-0677): AE_NOT_FOUND,
Processor Device is not present [20060707]
[ 26.061450] usbcore: registered new interface driver usbfs
[ 26.061549] usbcore: registered new interface driver hub
[ 26.061649] usbcore: registered new device driver usb
[ 26.078203] USB Universal Host Controller Interface driver v3.0
[ 26.078333] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low)
-> IRQ 21
[ 26.078468] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[ 26.078473] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 26.078679] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus
number 1
[ 26.078815] uhci_hcd 0000:00:1d.0: irq 21, io base 0x00002080
[ 26.079022] usb usb1: configuration #1 chosen from 1 choice
[ 26.079123] hub 1-0:1.0: USB hub found
[ 26.079194] hub 1-0:1.0: 2 ports detected
[ 26.121234] SCSI subsystem initialized
[ 26.126816] libata version 2.20 loaded.
[ 26.170278] Linux Tulip driver version 1.1.14 (December 15, 2004)
[ 26.186138] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low)
-> IRQ 20
[ 26.186278] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[ 26.186283] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 26.186377] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus
number 2
[ 26.186508] uhci_hcd 0000:00:1d.1: irq 20, io base 0x00002060
[ 26.186677] usb usb2: configuration #1 chosen from 1 choice
[ 26.186783] hub 2-0:1.0: USB hub found
[ 26.186854] hub 2-0:1.0: 2 ports detected
[ 26.271987] FDC 0 is a National Semiconductor PC87306
[ 26.294057] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low)
-> IRQ 19
[ 26.294199] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[ 26.294204] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 26.294299] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus
number 3
[ 26.294432] uhci_hcd 0000:00:1d.2: irq 19, io base 0x00002040
[ 26.294604] usb usb3: configuration #1 chosen from 1 choice
[ 26.294702] hub 3-0:1.0: USB hub found
[ 26.294773] hub 3-0:1.0: 2 ports detected
[ 26.401924] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low)
-> IRQ 16
[ 26.402064] PCI: Setting latency timer of device 0000:00:1d.3 to 64
[ 26.402069] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 26.402164] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus
number 4
[ 26.402293] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00002020
[ 26.402469] usb usb4: configuration #1 chosen from 1 choice
[ 26.402571] hub 4-0:1.0: USB hub found
[ 26.402639] hub 4-0:1.0: 2 ports detected
[ 26.512282] ata_piix 0000:00:1f.1: version 2.10ac1
[ 26.512306] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low)
-> IRQ 19
[ 26.512458] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[ 26.512531] ata1: PATA max UDMA/133 cmd 0x000101f0 ctl 0x000103f6 bmdma
0x000120b0 irq 14
[ 26.512669] ata2: PATA max UDMA/133 cmd 0x00010170 ctl 0x00010376 bmdma
0x000120b8 irq 15
[ 26.512795] scsi0 : ata_piix
[ 26.549721] usb 2-1: new full speed USB device using uhci_hcd and
address 2
[ 26.747292] usb 2-1: configuration #1 chosen from 1 choice
[ 26.859655] ATA: abnormal status 0x7F on port 0x000101f7
[ 26.869870] ATA: abnormal status 0x7F on port 0x000101f7
[ 27.001356] usb 3-2: new full speed USB device using uhci_hcd and
address 2
[ 27.041583] ata1.01: ATAPI, max UDMA/33
[ 27.186969] usb 3-2: configuration #1 chosen from 1 choice
[ 27.189939] hub 3-2:1.0: USB hub found
[ 27.192888] hub 3-2:1.0: 4 ports detected
[ 27.534622] usb 3-2.3: new full speed USB device using uhci_hcd and
address 3
[ 27.702587] usb 3-2.3: configuration #1 chosen from 1 choice
[ 57.023141] ata1.01: qc timeout (cmd 0xef)
[ 57.023218] ata1.01: failed to set xfermode (err_mask=0x4)
[ 57.023290] ata1: failed to recover some devices, retrying in 5 secs
[ 62.365356] ATA: abnormal status 0x7F on port 0x000101f7
[ 62.375571] ATA: abnormal status 0x7F on port 0x000101f7
[ 92.524856] ata1.01: qc timeout (cmd 0xef)
[ 92.524934] ata1.01: failed to set xfermode (err_mask=0x4)
[ 92.525007] ata1.01: limiting speed to UDMA/33:PIO3
[ 92.525074] ata1: failed to recover some devices, retrying in 5 secs
[ 97.863069] ATA: abnormal status 0x7F on port 0x000101f7
[ 97.873281] ATA: abnormal status 0x7F on port 0x000101f7
[ 128.014579] ata1.01: qc timeout (cmd 0xef)
[ 128.014655] ata1.01: failed to set xfermode (err_mask=0x4)
[ 128.014726] ata1.01: disabled
[ 128.518199] scsi1 : ata_piix
[ 128.518545] ata2: port disabled. ignoring.
[ 128.518679] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 128.518904] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low)
-> IRQ 20
[ 128.519047] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[ 128.519097] ata3: SATA max UDMA/133 cmd 0x000120c8 ctl 0x000120ee bmdma
0x000120a0 irq 20
[ 128.519228] ata4: SATA max UDMA/133 cmd 0x000120c0 ctl 0x000120ea bmdma
0x000120a8 irq 20
[ 128.519341] scsi2 : ata_piix
[ 128.686369] ata3.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors
= 156301488
[ 128.686480] ata3.00: ATA-7: SAMSUNG HD080HJ, ZH100-41, max UDMA7
[ 128.686552] ata3.00: 156301488 sectors, multi 16: LBA48 NCQ (depth 0/32)
[ 128.710355] ata3.00: ata_hpa_resize 1: sectors = 156301488, hpa_sectors
= 156301488
[ 128.711444] ata3.00: configured for UDMA/133
[ 128.711520] scsi3 : ata_piix
[ 128.880071] ATA: abnormal status 0x7F on port 0x000120c7
[ 128.880291] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD080HJ
ZH10 PQ: 0 ANSI: 5
[ 128.885954] ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 21 (level, low)
-> IRQ 22
[ 128.886871] tulip0: MII transceiver #1 config 1000 status 786d
advertising 05e1.
[ 128.895247] eth0: ADMtek Comet rev 17 at Port 0x1000,
00:50:BF:AC:23:4B, IRQ 22.
[ 128.895668] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low)
-> IRQ 21
[ 128.895809] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[ 128.895813] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 128.896094] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus
number 5
[ 128.896236] ehci_hcd 0000:00:1d.7: debug port 1
[ 128.896308] PCI: cache line size of 128 is not supported by device
0000:00:1d.7
[ 128.896317] ehci_hcd 0000:00:1d.7: irq 21, io mem 0x50204400
[ 128.900267] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver
10 Dec 2004
[ 128.901063] usb usb5: configuration #1 chosen from 1 choice
[ 128.901414] hub 5-0:1.0: USB hub found
[ 128.901495] hub 5-0:1.0: 8 ports detected
[ 128.941889] usb 2-1: USB disconnect, address 2
[ 129.014336] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 129.014429] sda: Write Protect is off
[ 129.014493] sda: Mode Sense: 00 3a 00 00
[ 129.014511] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 129.014698] SCSI device sda: 156301488 512-byte hdwr sectors (80026 MB)
[ 129.014783] sda: Write Protect is off
[ 129.014847] sda: Mode Sense: 00 3a 00 00
[ 129.014864] SCSI device sda: write cache: enabled, read cache: enabled,
doesn't support DPO or FUA
[ 129.014971] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 >
[ 129.102136] sd 2:0:0:0: Attached scsi disk sda
[ 129.107468] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 129.109798] usb 3-2: USB disconnect, address 2
[ 129.109872] usb 3-2.3: USB disconnect, address 3
[ 129.400124] Attempting manual resume
[ 129.400190] swsusp: Resume From Partition 8:7
[ 129.400192] PM: Checking swsusp image.
[ 129.400414] PM: Resume from disk failed.
[ 129.442383] kjournald starting. Commit interval 5 seconds
[ 129.442473] EXT3-fs: mounted filesystem with ordered data mode.
[ 129.901173] usb 2-1: new full speed USB device using uhci_hcd and
address 3
[ 130.090140] usb 2-1: configuration #1 chosen from 1 choice
[ 130.332860] usb 3-2: new full speed USB device using uhci_hcd and
address 4
[ 130.509822] usb 3-2: configuration #1 chosen from 1 choice
[ 130.512772] hub 3-2:1.0: USB hub found
[ 130.515724] hub 3-2:1.0: 4 ports detected
[ 130.857479] usb 3-2.3: new full speed USB device using uhci_hcd and
address 5
[ 131.025441] usb 3-2.3: configuration #1 chosen from 1 choice
[ 138.586702] NET: Registered protocol family 17
[ 139.268756] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 139.270763] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 139.290498] iTCO_vendor_support: vendor-support=0
[ 139.291777] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.01
(11-Nov-2006)
[ 139.291983] iTCO_wdt: Found a ICH7 or ICH7R TCO device (Version=2,
TCOBASE=0x0460)
[ 139.292141] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 139.303671] intel_rng: Firmware space is locked read-only. If you can't
or
[ 139.303674] intel_rng: don't want to disable this in firmware setup,
and if
[ 139.303675] intel_rng: you are certain that your system has a functional
[ 139.303677] intel_rng: RNG, try using the 'no_fwh_detect' option.
[ 139.738184] Linux agpgart interface v0.102 (c) Dave Jones
[ 139.740141] agpgart: Detected an Intel 946GZ Chipset.
[ 139.740374] agpgart: Unknown page table size, assuming 512KB
[ 139.740451] agpgart: Detected 7676K stolen memory.
[ 139.759975] agpgart: AGP aperture is 256M @ 0x40000000
[ 139.894838] input: PC Speaker as /class/input/input2
[ 140.235596] 0000:04:00.0: tulip_stop_rxtx() failed (CSR5 0xfc664010
CSR6 0xff972113)
[ 140.235609] eth0: Setting full-duplex based on MII#1 link partner
capability of 45e1.
[ 140.466263] Linux video capture interface: v2.00
[ 140.517531] input: ImPS/2 Generic Wheel Mouse as /class/input/input3
[ 140.717338] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low)
-> IRQ 17
[ 140.717492] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[ 140.756622] parport: PnPBIOS parport detected.
[ 140.756777] parport0: PC-style at 0x378 (0x778), irq 7, using FIFO
[PCSPP,TRISTATE,COMPAT,ECP]
[ 140.938020] ubuntu/media/gspcav1/gspca_core.c: USB SPCA5XX camera
found.(ZC3XX)
[ 141.130215] usbcore: registered new interface driver gspca
[ 141.130302] ubuntu/media/gspcav1/gspca_core.c: gspca driver 01.00.12
registered
[ 141.151857] zc0301: V4L2 driver for ZC0301[P] Image Processor and
Control Chip v1:1.05
[ 141.152027] usbcore: registered new interface driver zc0301
[ 141.355414] fuse init (API version 7.8)
[ 141.393273] lp0: using parport0 (interrupt-driven).
[ 141.440058] Adding 2096440k swap on
/dev/disk/by-uuid/ae544248-9295-439a-a7fd-9b6b65f4b3f0. Priority:-1
extents:1 across:2096440k
[ 141.871974] EXT3 FS on sda11, internal journal
[ 142.034973] NET: Registered protocol family 10
[ 142.035075] lo: Disabled Privacy Extensions
[ 142.801789] kjournald starting. Commit interval 5 seconds
[ 142.802016] EXT3 FS on sda9, internal journal
[ 142.802022] EXT3-fs: mounted filesystem with ordered data mode.
[ 142.833773] NTFS driver 2.1.28 [Flags: R/O MODULE].
[ 142.899602] NTFS volume version 3.1.
[ 142.902738] kjournald starting. Commit interval 5 seconds
[ 142.903001] EXT3 FS on sda10, internal journal
[ 142.903008] EXT3-fs: mounted filesystem with ordered data mode.
[ 143.042191] kjournald starting. Commit interval 5 seconds
[ 143.042440] EXT3 FS on sda6, internal journal
[ 143.042446] EXT3-fs: mounted filesystem with ordered data mode.
[ 143.053188] kjournald starting. Commit interval 5 seconds
[ 143.053408] EXT3 FS on sda8, internal journal
[ 143.053414] EXT3-fs: mounted filesystem with ordered data mode.
[ 152.268597] eth0: no IPv6 routers present
[ 153.245685] No dock devices found.
[ 153.326051] input: Power Button (FF) as /class/input/input4
[ 153.330984] ACPI: Power Button (FF) [PWRF]
[ 153.363113] input: Sleep Button (CM) as /class/input/input5
[ 153.367998] ACPI: Sleep Button (CM) [SLPB]
[ 153.507559] Using specific hotkey driver
[ 153.542752] ibm_acpi: ec object not found
[ 153.620430] pcc_acpi: loading...
[ 157.707627] ppdev: user-space parallel port driver
[ 158.390005] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 158.390010] apm: overridden by ACPI.
[ 158.928724] Bluetooth: Core ver 2.11
[ 158.929185] NET: Registered protocol family 31
[ 158.929189] Bluetooth: HCI device and connection manager initialized
[ 158.929193] Bluetooth: HCI socket layer initialized
[ 158.961575] Bluetooth: L2CAP ver 2.8
[ 158.961580] Bluetooth: L2CAP socket layer initialized
[ 159.127445] Bluetooth: RFCOMM socket layer initialized
[ 159.127462] Bluetooth: RFCOMM TTY layer initialized
[ 159.127464] Bluetooth: RFCOMM ver 1.8
[ 160.045927] [drm] Initialized drm 1.1.0 20060810
[ 160.052095] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low)
-> IRQ 16
[ 160.055394] [drm] Initialized i915 1.6.0 20060119 on minor 0
[ 173.213089] eth0: no IPv6 routers present
martins em martins-desktop:~$
On Fri, 20 Apr 2007 17:57:29 -0300, Allison Almeida
<allison.almeida em gmail.com> wrote:
> Antonio.
>
>
> Qual a marca/modelo do seu cdrom? O que retorna o dmesg?
>
>
> []s
> Allison Almeida.
>
>
>> --
>> Interessado em aprender mais sobre o Ubuntu em português?
>> http://wiki.ubuntu-br.org/ComeceAqui -
>> ubuntu-br mailing list
>> ubuntu-br em lists.ubuntu.com
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>>
--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
More information about the ubuntu-br
mailing list