[Ubuntu-BR] Compartilhamento com partição fat32 não funciona no samba

[Ronan]

Obrigado Thomas e demais confrades que me ajudaram a resolver o problema 
do compartilhmento das pastas.
Deu tudo certo.
Ronan


Thomas Gustavo Dietrich escreveu:
> Ok, vamos lá:
>
> Se você quiser que o samba não peça senha, altere essa opção:
>
> # in the samba-doc package for details.
> ;   security = users
>
> para
>
> # in the samba-doc package for details.
> security = share
>
> Nao esqueça de remover o ponto-e-virgula da frente da linha.
> Outra opção que você deve mudar é:
>
> ;   guest account = nobody
>
> para
>
> guest account = usuario_qualquer
>
> onde usuario_qualquer é o usuario do seu sistema que tem permissão de
> leitura e escrita nos diretórios que você deseja compartilhar.
> Do mesmo modo, remova o ponto-e-virgula da frente da linha.
> Abraço!
>
> On 11/12/06, Ronan <mestrado em antares.pro.br> wrote:
>   
>> Tenho quatro partições, duas fat32, uma ext3 e uma swap. Muito bem,
>> quando compartilho pastas que estão na ext3, o samba reconhece a pasta e
>> me deixa ver o conteúdo, mas, quando compartilho pastas que estão na
>> fat32, o samba reconhece, pois, quando entro em servidores de rede, rede
>> windows, etc... as pastas que foram compartilhadas estão lá mas quando
>> clico nelas aparece a seguinte mensagem: O conteúdo da pasta não pode
>> ser exibido -> a pasta não pode ser encontrada.
>> Também não consigo compatilhar uma partição inteira... tentei entrar em
>> media/hdb5 e compartilhar o hdb5,  mas não deu certo.  Quando clico no
>> icone da partição, abre uma janela de login e ele me pede usuario,
>> dominio e senha. Já tentei de tudo mas não aceita nada para logar.
>> Alguém pode me ajudar. Uso ubuntu 6.06
>>
>> Abaixo vou postar o smb.conf
>>
>>
>> # Sample configuration file for the Samba suite for Debian GNU/Linux.
>> #
>> #
>> # This is the main Samba configuration file. You should read the
>> # smb.conf(5) manual page in order to understand the options listed
>> # here. Samba has a huge number of configurable options most of which
>> # are not shown in this example
>> #
>> # Any line which starts with a ; (semi-colon) or a # (hash)
>> # is a comment and is ignored. In this example we will use a #
>> # for commentary and a ; for parts of the config file that you
>> # may wish to enable
>> #
>> # NOTE: Whenever you modify this file you should run the command
>> # "testparm" to check that you have not made any basic syntactic
>> # errors.
>> #
>>
>> #======================= Global Settings =======================
>>
>> [global]
>>
>> ## Browsing/Identification ###
>>
>> # Change this to the workgroup/NT-domain name your Samba server will
>> part of
>>   workgroup = rd
>>
>> # server string is the equivalent of the NT Description field
>>   server string = %h server (Samba, Ubuntu)
>>
>> # Windows Internet Name Serving Support Section:
>> # WINS Support - Tells the NMBD component of Samba to enable its WINS
>> Server
>> ;   wins support = no
>>
>> # WINS Server - Tells the NMBD components of Samba to be a WINS Client
>> # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
>> ;   wins server = w.x.y.z
>>
>> # This will prevent nmbd to search for NetBIOS names through DNS.
>>   dns proxy = no
>>
>> # What naming service and in what order should we use to resolve host names
>> # to IP addresses
>> ;   name resolve order = lmhosts host wins bcast
>>
>> #### Networking ####
>>
>> # The specific set of interfaces / networks to bind to
>> # This can be either the interface name or an IP address/netmask;
>> # interface names are normally preferred
>> ;   interfaces = 127.0.0.0/8 eth0
>>
>> # Only bind to the named interfaces and/or networks; you must use the
>> # 'interfaces' option above to use this.
>> # It is recommended that you enable this feature if your Samba machine is
>> # not protected by a firewall or is a firewall itself.  However, this
>> # option cannot handle dynamic or non-broadcast interfaces correctly.
>> ;   bind interfaces only = true
>>
>>
>>
>> #### Debugging/Accounting ####
>>
>> # This tells Samba to use a separate log file for each machine
>> # that connects
>>   log file = /var/log/samba/log.%m
>>
>> # Put a capping on the size of the log files (in Kb).
>>   max log size = 1000
>>
>> # If you want Samba to only log through syslog then set the following
>> # parameter to 'yes'.
>> ;   syslog only = no
>>
>> # We want Samba to log a minimum amount of information to syslog.
>> Everything
>> # should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
>> # through syslog you should set the following parameter to something
>> higher.
>>   syslog = 0
>>
>> # Do something sensible when Samba crashes: mail the admin a backtrace
>>   panic action = /usr/share/samba/panic-action %d
>>
>>
>> ####### Authentication #######
>>
>> # "security = user" is always a good idea. This will require a Unix account
>> # in this server for every user accessing the server. See
>> # /usr/share/doc/samba-doc/htmldocs/Samba-HOWTO-Collection/ServerType.html
>> # in the samba-doc package for details.
>> ;   security = users
>>
>> # You may wish to use password encryption.  See the section on
>> # 'encrypt passwords' in the smb.conf(5) manpage before enabling.
>>   encrypt passwords = true
>>
>> # If you are using encrypted passwords, Samba will need to know what
>> # password database type you are using.   passdb backend = tdbsam
>>
>>   obey pam restrictions = yes
>>
>> ;   guest account = nobody
>>   invalid users = root
>>
>> # This boolean parameter controls whether Samba attempts to sync the Unix
>> # password with the SMB password when the encrypted SMB password in the
>> # passdb is changed.
>> ;   unix password sync = no
>>
>> # For Unix password sync to work on a Debian GNU/Linux system, the
>> following
>> # parameters must be set (thanks to Ian Kahan
>> <<kahan em informatik.tu-muenchen.de> for
>> # sending the correct chat script for the passwd program in Debian Sarge).
>>   passwd program = /usr/bin/passwd %u
>>   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n
>> *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .
>>
>> # This boolean controls whether PAM will be used for password changes
>> # when requested by an SMB client instead of the program listed in
>> # 'passwd program'. The default is 'no'.
>> ;   pam password change = no
>>
>> ########## Domains ###########
>>
>> # Is this machine able to authenticate users. Both PDC and BDC
>> # must have this setting enabled. If you are the BDC you must
>> # change the 'domain master' setting to no
>> #
>> ;   domain logons = yes
>>
>> #
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the location of the user's profile directory
>> # from the client point of view)
>> # The following required a [profiles] share to be setup on the
>> # samba server (see below)
>> ;   logon path = \\%N\profiles\%U
>> # Another common choice is storing the profile in the user's home directory
>> ;   logon path = \\%N\%U\profile
>>
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the location of a user's home directory (from the client
>> # point of view)
>> ;   logon drive = H:
>> ;   logon home = \\%N\%U
>>
>> # The following setting only takes effect if 'domain logons' is set
>> # It specifies the script to run during logon. The script must be stored
>> # in the [netlogon] share
>> # NOTE: Must be store in 'DOS' file format convention
>> ;   logon script = logon.cmd
>>
>> # This allows Unix users to be created on the domain controller via the
>> SAMR
>> # RPC pipe.  The example command creates a user account with a disabled
>> Unix
>> # password; please adapt to your needs
>> ; add user script = /usr/sbin/adduser --quiet --disabled-password
>> --gecos "" %u
>>
>> ########## Printing ##########
>>
>> # If you want to automatically load your printer list rather
>> # than setting them up individually then you'll need this
>> ;   load printers = yes
>>
>> # lpr(ng) printing. You may wish to override the location of the
>> # printcap file
>> ;   printing = bsd
>> ;   printcap name = /etc/printcap
>>
>> # CUPS printing.  See also the cupsaddsmb(8) manpage in the
>> # cupsys-client package.
>> ;   printing = cups
>> ;   printcap name = cups
>>
>> # When using [print$], root is implicitly a 'printer admin', but you can
>> # also give this right to other users to add drivers and set printer
>> # properties
>> ;   printer admin = @lpadmin
>>
>>
>> ############ Misc ############
>>
>> # Using the following line enables you to customise your configuration
>> # on a per machine basis. The %m gets replaced with the netbios name
>> # of the machine that is connecting
>> ;   include = /home/samba/etc/smb.conf.%m
>>
>> # Most people will find that this option gives better performance.
>> # See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/speed.html
>> # for details
>> # You may want to add the following on a Linux system:
>> #         SO_RCVBUF=8192 SO_SNDBUF=8192
>>   socket options = TCP_NODELAY
>>
>> # The following parameter is useful only if you have the linpopup package
>> # installed. The samba maintainer and the linpopup maintainer are
>> # working to ease installation and configuration of linpopup and samba.
>> ;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &
>>
>> # Domain Master specifies Samba to be the Domain Master Browser. If this
>> # machine will be configured as a BDC (a secondary logon server), you
>> # must set this to 'no'; otherwise, the default behavior is recommended.
>> ;   domain master = auto
>>
>> # Some defaults for winbind (make sure you're not using the ranges
>> # for something else.)
>> ;   idmap uid = 10000-20000
>> ;   idmap gid = 10000-20000
>> ;   template shell = /bin/bash
>>
>> #======================= Share Definitions =======================
>>
>> # Un-comment the following (and tweak the other settings below to suit)
>> # to enable the default home directory shares.  This will share each
>> # user's home directory as \\server\username
>> ;[homes]
>> ;   comment = Home Directories
>> ;   browseable = no
>>
>> # By default, \\server\username shares can be connected to by anyone
>> # with access to the samba server.  Un-comment the following parameter
>> # to make sure that only "username" can connect to \\server\username
>> ;   valid users = %S
>>
>> # By default, the home directories are exported read-only. Change next
>> # parameter to 'yes' if you want to be able to write to them.
>> ;   writable = no
>>
>> # File creation mask is set to 0600 for security reasons. If you want to
>> # create files with group=rw permissions, set next parameter to 0664.
>> ;   create mask = 0600
>>
>> # Directory creation mask is set to 0700 for security reasons. If you
>> want to
>> # create dirs. with group=rw permissions, set next parameter to 0775.
>> ;   directory mask = 0700
>>
>> # Un-comment the following and create the netlogon directory for Domain
>> Logons
>> # (you need to configure Samba to act as a domain controller too.)
>> ;[netlogon]
>> ;   comment = Network Logon Service
>> ;   path = /home/samba/netlogon
>> ;   guest ok = yes
>> ;   writable = no
>> ;   share modes = no
>>
>> # Un-comment the following and create the profiles directory to store
>> # users profiles (see the "logon path" option above)
>> # (you need to configure Samba to act as a domain controller too.)
>> # The path below should be writable by all users so that their
>> # profile directory may be created the first time they log on
>> ;[profiles]
>> ;   comment = Users profiles
>> ;   path = /home/samba/profiles
>> ;   guest ok = no
>> ;   browseable = no
>> ;   create mask = 0600
>> ;   directory mask = 0700
>>
>> wins support = no
>> [printers]
>>   comment = All Printers
>>   browseable = no
>>   path = /tmp
>>   printable = yes
>>   public = no
>>   writable = no
>>   create mode = 0700
>>
>> # Windows clients look for this share name as a source of downloadable
>> # printer drivers
>> [print$]
>>   comment = Printer Drivers
>>   path = /var/lib/samba/printers
>>   browseable = yes
>>   read only = yes
>>   guest ok = no
>> # Uncomment to allow remote administration of Windows print drivers.
>> # Replace 'ntadmin' with the name of the group your admin users are
>> # members of.
>> ;   write list = root, @ntadmin
>>
>> # A sample share for sharing your CD-ROM with others.
>> ;[cdrom]
>> ;   comment = Samba server's CD-ROM
>> ;   writable = no
>> ;   locking = no
>> ;   path = /cdrom
>> ;   public = yes
>>
>> # The next two parameters show how to auto-mount a CD-ROM when the
>> #    cdrom share is accesed. For this to work /etc/fstab must contain
>> #    an entry like this:
>> #
>> #       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
>> #
>> # The CD-ROM gets unmounted automatically after the connection to the
>> #
>> # If you don't want to use auto-mounting/unmounting make sure the CD
>> #    is mounted on /cdrom
>> #
>> ;   preexec = /bin/mount /cdrom
>> ;   postexec = /bin/umount /cdrom
>>
>>
>>
>> [hd40]
>> path = /media/hdd5/HD40-Dados
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>> [teste]
>> path = /media/hdd5/HD40Dados/dados
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>> [ronan]
>> path = /home/ronan
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>> [tersrte]
>> path = /media/hdd5
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>> [laal]
>> path = /media/hdb7/lala
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>> [fotos]
>> path = /home/ronan/Desktop/fotos
>> available = yes
>> browseable = yes
>> public = yes
>> writable = yes
>>
>>
>>
>>
>> --
>> ubuntu-br mailing list
>> ubuntu-br em lists.ubuntu.com
>> www.ubuntubrasil.org
>> https://lists.ubuntu.com/mailman/listinfo/ubuntu-br
>>
>>     
>
>
>