[Bug 714862] Re: Atheros AR3002 cannot be turned up/is not recognized.

[Marcus Sharp]

Thanks, but installing that did not solve the issue with either 10.04 (32
bit) or 11.04.


On Thu, Mar 17, 2011 at 2:20 AM, nexero <714862 at bugs.launchpad.net> wrote:

> This also works for me (on Ubuntu 10.10 x64)..
> Thanks!
>
> --
> You received this bug notification because you are a direct subscriber
> of the bug.
> https://bugs.launchpad.net/bugs/714862
>
> Title:
>  Atheros AR3002 cannot be turned up/is not recognized.
>
> Status in “bluez” package in Ubuntu:
>  New
>
> Bug description:
>  The key is the device by Atheros Communications, Inc, which is their
>  AR3002.
>
>  This is the device that Dell is putting into this Vostro V130, which Dell
> ships with Ubuntu 10.04 pre-loaded.
>   Atheros indicates that:
>
>  "As a proponent of open software, Atheros provides its own Bluetooth
>  stack for easy portability and also supports standard Bluetooth stacks
>  such as Blue Z on Linux, Chrome OS, and Android OS. All Bluetooth
>  profiles in Blue Z are supported, including headset and hands-free
>  profiles, A2DP, FTP, DUN, OPP, PAN, SPP and PBAP.."
>
>  So they say this device should support Bluez.
>
>  Go to the Bluez page, and search for "atheros," and you find this:
>
>  http://www.bluez.org/l2cap-extended-features-on-2-6-36/
>
>  Very briefly, it says "Support for the Atheros AR300x chip."
>
>  I would hope that "3002" is part of "300x," but I'm not sure. I went
>  ahead and added the natty packages to my repository, so that I could
>  effectively install the bluez 4.87 and related packages.
>
>  Well, this ends a lot of errors. Now, when I launch blueman, I get no
>  connection errors, or anything, but still no options to connect any
>  devices.
>
>  This still happens:
>
>  sudo hciconfig:
>
>  hci0: Type: BR/EDR Bus: USB
>  BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
>  DOWN
>  RX bytes:0 acl:0 sco:0 events:0 errors:0
>  TX bytes:24 acl:0 sco:0 commands:8 errors:0
>
>  Which tells me that the AR3002 is still not "seen."
>
>  sudo hciconfig hci0 up yields:
>  Can't init device hci0: Connection timed out (110)
>
>  Now, in a very rational sense, I believe I have hit the dead end. The
>  device is simply too new, I guess, to be supported(?)  Turning in bug
>  request in hope of future support, and as question has no activity on
>  it.  If this this is incorrect procedure, please forgive, as I'm new
>  here.
>
> To unsubscribe from this bug, go to:
> https://bugs.launchpad.net/ubuntu/+source/bluez/+bug/714862/+subscribe
>

-- 
You received this bug notification because you are a member of
Bluetooth, which is subscribed to bluez in ubuntu.
https://bugs.launchpad.net/bugs/714862

Title:
  Atheros AR3002 cannot be turned up/is not recognized.