[Bug 314476] [NEW] Apple Wireless Keyboard does not work

[Miroslav Prašil /cezz/]

Public bug reported:

Binary package hint: bluez-gnome

I'm using Ubuntu 8.10 on Sony PS3 and i have successfully  paired my
apple wireless keyboard via the Bluetooth Applet (v. 1.8) The device is
marked as trusted and it even appear as connected:

$ hcitool con 
Connections:
	> ACL 00:1E:52:6D:28:C8 handle 43 state 1 lm MASTER AUTH 

$ hciconfig 
hci0:	Type: USB
	BD Address: 00:1D:BA:12:6F:1C ACL MTU: 384:8 SCO MTU: 64:8
	UP RUNNING PSCAN ISCAN 
	RX bytes:1166775 acl:5387 sco:0 events:1073 errors:0
	TX bytes:17841 acl:730 sco:0 commands:124 errors:0

But the keyboard does not work at all. It just connects automatically
when I start typing on it, but then it does nothing.. (No key press is
detected - tried by xev ) This is the only output i found in logs
(daemon.log):

Jan  6 19:37:02 dm6 bluetoothd[4217]: link_key_request
(sba=00:1D:BA:12:6F:1C, dba=00:1E:52:6D:28:C8)

00:1E:52:6D:28:C8 is Apple wireless keyboard

Keyboard is working fine with MacBook using macos X, and using other
bluetooth devices on my Ubuntu PS3 system (like mobile phone) works out
of the box without problems so I hope it's not an hardware related
problem..

Few others (hopefully useful) console outputs:

$ hcitool info 00:1E:52:6D:28:C8
Requesting information ...
	BD Address:  00:1E:52:6D:28:C8
	Device Name: cezzskb
	LMP Version: 2.0 (0x3) LMP Subversion: 0x31e
	Manufacturer: Broadcom Corporation (15)
	Features: 0xbc 0x02 0x04 0x38 0x08 0x00 0x00 0x00
		<encryption> <slot offset> <timing accuracy> <role switch> 
		<sniff mode> <RSSI> <power control> <enhanced iscan> 
		<interlaced iscan> <interlaced pscan> <AFH cap. slave> 

$ hciconfig hci0 features 
hci0:	Type: USB
	BD Address: 00:1D:BA:12:6F:1C ACL MTU: 384:8 SCO MTU: 64:8
	Features: 0xff 0xff 0x8f 0xfe 0x9b 0xf9 0x00 0x80
		<3-slot packets> <5-slot packets> <encryption> <slot offset> 
		<timing accuracy> <role switch> <hold mode> <sniff mode> 
		<park state> <RSSI> <channel quality> <SCO link> <HV2 packets> 
		<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme> 
		<power control> <transparent SCO> <broadcast encrypt> 
		<EDR ACL 2 Mbps> <EDR ACL 3 Mbps> <enhanced iscan> 
		<interlaced iscan> <interlaced pscan> <inquiry with RSSI> 
		<extended SCO> <EV4 packets> <EV5 packets> <AFH cap. slave> 
		<AFH class. slave> <3-slot EDR ACL> <5-slot EDR ACL> 
		<AFH cap. master> <AFH class. master> <EDR eSCO 2 Mbps> 
		<EDR eSCO 3 Mbps> <3-slot EDR eSCO> <extended features> 

$ hciconfig hci0 version 
hci0:	Type: USB
	BD Address: 00:1D:BA:12:6F:1C ACL MTU: 384:8 SCO MTU: 64:8
	HCI Ver: 2.0 (0x3) HCI Rev: 0xe18 LMP Ver: 2.0 (0x3) LMP Subver: 0xe18
	Manufacturer: Cambridge Silicon Radio (10)

** Affects: bluez-gnome (Ubuntu)
     Importance: Undecided
         Status: New

-- 
Apple Wireless Keyboard does not work
https://bugs.launchpad.net/bugs/314476
You received this bug notification because you are a member of
Bluetooth, which is subscribed to bluez-gnome in ubuntu.