[Ubuntu-BD] EDGE Modem can't connect internet in Ubuntu

[ashif palash]

Actually i am not connected in linux. My wvdial.conf file is:
[Dialer Defaults]
Init1 = ATZ
Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
Init3 = AT+CGDCONT=1,"IP","internet"
Modem Type = USB Modem
Baud = 460800
New PPPD = yes
Modem = /dev/ttyACM0
ISDN = 0
Phone = *99***1#
Username = xyz
Password = xyz
Stupid Mode = 1
 
 
And the detailed command line and results are given below--
palash at ubuntu:~$ sudo apt-get install wvdial
[sudo] password for palash: 
Reading package lists... Done
Building dependency tree 
Reading state information... Done
wvdial is already the newest version.
0 upgraded, 0 newly installed, 0 to remove and 286 not upgraded.
palash at ubuntu:~$ sudo wvdialconf
Editing `/etc/wvdial.conf'.
Scanning your serial ports for a modem.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
Modem Port Scan<*1>: S1 S2 S3 
WvModem<*1>: Cannot get information for serial port.
ttyACM0<*1>: ATQ0 V1 E1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 Z -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 -- OK
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
ttyACM0<*1>: Modem Identifier: ATI -- 5209.T406.00.A4
ttyACM0<*1>: Speed 4800: AT -- OK
ttyACM0<*1>: Speed 9600: AT -- OK
ttyACM0<*1>: Speed 19200: AT -- OK
ttyACM0<*1>: Speed 38400: AT -- OK
ttyACM0<*1>: Speed 57600: AT -- OK
ttyACM0<*1>: Speed 115200: AT -- OK
ttyACM0<*1>: Speed 230400: AT -- OK
ttyACM0<*1>: Speed 460800: AT -- OK
ttyACM0<*1>: Max speed is 460800; that should be safe.
ttyACM0<*1>: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0 -- OK
Found an USB modem on /dev/ttyACM0.
Modem configuration written to /etc/wvdial.conf.
ttyACM0<Info>: Speed 460800; init "ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0"
palash at ubuntu:~$ sudo gedit /etc/wvdial.conf
palash at ubuntu:~$ sudo wvdial
--> WvDial: Internet dialer version 1.60
--> Cannot get information for serial port.
--> Initializing modem.
--> Sending: ATZ
ATZ
OK
--> Sending: ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
OK
--> Sending: AT+CGDCONT=1,"IP","internet"
AT+CGDCONT=1,"IP","internet"
OK
--> Modem initialized.
--> Sending: ATDT*99***1#
--> Waiting for carrier.
ATDT*99***1#
CONNECT
--> Carrier detected. Starting PPP immediately.
--> Starting pppd at Wed May 6 11:34:08 2009
--> Pid of pppd: 6089
--> Using interface ppp0
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> local IP address 10.80.87.100
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> remote IP address 192.200.1.21
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> primary DNS address 202.134.13.4
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
--> secondary DNS address 202.134.12.13
--> pppd: ��[1f][08]��[1f][08] �[1f][08]
 
 
 
Thanks
 
Ashif

--- On Tue, 5/5/09, shiplu <shiplu.net at gmail.com> wrote:
%0


      Get your new Email address!
Grab the Email name you&#39;ve always wanted before someone else does!
http://mail.promotions.yahoo.com/newdomains/aa/