[Bug 502035] Re: Please backport Bristol | current version on karmic (9.10) is bristol_0.40.1-0.1 | version required bristol_0.40.6-1 available on lucid.
salvoinzk
salvoinz at yahoo.it
Sat Jan 2 21:52:32 GMT 2010
Hi Ilya,
Thank you very much!
Now it works!!!
I have installed both package :
"bristol-data_0.40.6-1~karmic1~ppa1_all.deb" and
"bristol_0.40.6-1~karmic1~ppa1_amd64.deb".
Well here is some report:
when you start bristol alone, you have to type: startBristol -b3 ( -b3
is for the hammond b3 of course you know) and it goes, here is the
output:
salvo at piera-laptop:~$ startBristol -b3
checking availability of TCP port 5028
using port 5028
generate bandwidth limited waveforms(31, 12)
spawning midi thread
could not reschedule thread
parent going into idle loop
Init waiting for midi thread OK status
Fixing samplerate at 44100
midi sequencer: bristol
Opened listening control socket: 5028
midiOpen: 5028(100)
Client ID = 129
Queue ID = 0
Registered 129 0
Device name "bristol" did not parse, defaults 128.0
Got midi thread OK status
bristol version 0.40.6
connected to :0.0
display is 1366 by 768 pixels
Window is w 1366, h 768, d 24, 0 0 0
Using DirectColor display
Initialise the hammondB3 link to bristol: 20b5f60
hostname is localhost, bristol
TCP port: 5028
Accepted connection from 0 (3) onto 2 (5)
Connected to the bristol control socket: 4
bristolengine already active
created 32 voices: allocated 32 to synth
sid is 0
spawning audio thread
could not reschedule thread
init waiting for audio thread OK status
bristolAudioOpen(plughw:0,0, 44100, 256, 1a00008)
audioOpen(b09740c0, 0, 1024): plughw:0,0
opening device plughw:0,0, flags 0000000d
open playback on plughw:0,0, pre 8
Plug PCM: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
Its setup is:
stream : PLAYBACK
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 2048
period_size : 256
period_time : 5804
tstamp_mode : NONE
period_step : 1
avail_min : 256
period_event : 0
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
appl_ptr : 0
hw_ptr : 0
open capture on plughw:0,0: pre 8
Plug PCM: Hardware PCM card 0 'HDA NVidia' device 0 subdevice 0
Its setup is:
stream : CAPTURE
access : RW_INTERLEAVED
format : S16_LE
subformat : STD
channels : 2
rate : 44100
exact rate : 44100 (44100/1)
msbits : 16
buffer_size : 2048
period_size : 256
period_time : 5804
tstamp_mode : NONE
period_step : 1
avail_min : 256
period_event : 0
start_threshold : 2147483647
stop_threshold : 2048
silence_threshold: 0
silence_size : 0
boundary : 4611686018427387904
appl_ptr : 0
hw_ptr : 0
opened audio device with a fragment size of 1024, buffer 11fbc60, fd 8/9
setAudioStart2(0)
Start playback
Start capture
Midi read retry (2857)
initialising one hammond sound
No private microtonal mapping for hammond
veloc first 0.00 last 1.00
hostname is localhost, bristol
TCP port: 5028
Accepted connection from 0 (3) onto 3 (6)
Connected to the bristol control socket: 5
bristolengine already active
created 32 voices: allocated 32 to synth
sid is 1
initialising one hammond second manual
No private microtonal mapping for hammondB3
veloc first 1.00 last 1.00
user r 1000/1000, e 1000/1000
Client ID = 130
Queue ID = 1
Registered 130 0
Device name "brighton" did not parse, defaults 128.0
opened GUI midi handles: 2, -1
Read Configuration: hammondB3
brightonWorldChanged(765 400 10 10)
going operational: 20a3010, 20b5f60
then to go out type control c
If you want to use it with Ardour, for example, you should follow these
steps:
1) launch jack
2) start Ardour
3) now start jack
4) open a shell and type startBristol -jack -b3 (I mean you have to specify the jack driver, -b3 is always for hammon b3)
5) make the connection with jack and play.
And here is the output
salvo at piera-laptop:~$ startBristol -jack -b3
jackstats found -rate 48000 -count 1024
checking availability of TCP port 5028
using port 5028
generate bandwidth limited waveforms(31, 12)
spawning midi thread
could not reschedule thread
parent going into idle loop
Init waiting for midi thread OK status
Fixing samplerate at 48000
midi sequencer: bristol
Opened listening control socket: 5028
midiOpen: 5028(100)
Client ID = 130
Queue ID = 0
Registered 130 0
Device name "bristol" did not parse, defaults 128.0
Got midi thread OK status
bristol version 0.40.6
connected to :0.0
display is 1366 by 768 pixels
Window is w 1366, h 768, d 24, 0 0 0
Using DirectColor display
Initialise the hammondB3 link to bristol: 1a32f60
hostname is localhost, bristol
TCP port: 5028
Accepted connection from 0 (3) onto 2 (5)
Connected to the bristol control socket: 4
bristolengine already active
created 32 voices: allocated 32 to synth
sid is 0
spawning audio thread
registering jack interface: bristol
could not reschedule thread
init waiting for audio thread OK status
SSE2 detected
initialising one hammond sound
No private microtonal mapping for hammond
veloc first 0.00 last 1.00
hostname is localhost, bristol
TCP port: 5028
Accepted connection from 0 (3) onto 3 (9)
Connected to the bristol control socket: 5
bristolengine already active
created 32 voices: allocated 32 to synth
sid is 1
initialising one hammond second manual
No private microtonal mapping for hammondB3
veloc first 1.00 last 1.00
Found port system:playback_1
Found port system:playback_2
Found port system:capture_1
Found port system:capture_2
user r 1000/1000, e 1000/1000
Client ID = 131
Queue ID = 1
Registered 131 0
Device name "brighton" did not parse, defaults 128.0
opened GUI midi handles: 2, -1
Read Configuration: hammondB3
brightonWorldChanged(765 400 10 10)
going operational: 10a6010, 10b8f60
I have also tested the miniMoog by typing : startBristol -jack -mini
here the output:
salvo at piera-laptop:~$ startBristol -jack -mini
jackstats found -rate 48000 -count 1024
checking availability of TCP port 5028
using port 5028
generate bandwidth limited waveforms(31, 12)
spawning midi thread
could not reschedule thread
parent going into idle loop
Init waiting for midi thread OK status
Fixing samplerate at 48000
midi sequencer: bristol
Opened listening control socket: 5028
midiOpen: 5028(100)
Client ID = 130
Queue ID = 0
Registered 130 0
Device name "bristol" did not parse, defaults 128.0
Got midi thread OK status
bristol version 0.40.6
connected to :0.0
display is 1366 by 768 pixels
Window is w 1366, h 768, d 24, 0 0 0
Using DirectColor display
Initialise the mini link to bristol: 202cf60
hostname is localhost, bristol
TCP port: 5028
Accepted connection from 0 (3) onto 2 (5)
Connected to the bristol control socket: 4
bristolengine already active
created 32 voices: allocated 32 to synth
sid is 0
spawning audio thread
could not reschedule thread
init waiting for audio thread OK status
registering jack interface: bristol
SSE2 detected
initialising one bristolmini
No private microtonal mapping for mini
veloc first 0.00 last 1.00
user r 1000/1000, e 1000/1000
Client ID = 131
Queue ID = 1
Registered 131 0
Device name "brighton" did not parse, defaults 128.0
opened GUI midi handles: 1, -1
Read Configuration: mini
brightonWorldChanged(700 400 10 10)
going operational: 201a010, 202cf60
Found port system:playback_1
Found port system:playback_2
Found port system:capture_1
Found port system:capture_2
M: going to display: 201a010, 202cf60
M: going to display: 201a010, 202cf60
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
Active count changed. Overriding
^Cclosedown on interrupt
cleanupBrighton(0)
empty audio list, cleaning up
return - no data in buffer for 0
socket closed
request acked: -1
salvo at piera-laptop:~$
perational: 1a20010, 1a32f60
So you made a very good job Ilia.
I would like to test bristol by a midi keyboard, but I have only checked
it by computer keyboard, (i have to by a midi keyboard!)
Unfortunately monoBristol still doesn't work, I tried every
configuration, if you could do something about it, you are very welcome!
monobristol _0.40.5-0ubuntu1
Thanks again
--
Please backport Bristol | current version on karmic (9.10) is bristol_0.40.1-0.1 | version required bristol_0.40.6-1 available on lucid.
https://bugs.launchpad.net/bugs/502035
You received this bug notification because you are a member of Ubuntu
Backporters, which is the registrant for Karmic Backports.
More information about the ubuntu-backports
mailing list