Log for failed build of openipmi_2.0.13-1ubuntu1 (dist=intrepid-autotest)
Build Daemon user
noreply at buildd.ubuntu.com
Sun Jul 6 17:42:06 BST 2008
Automatic build of openipmi_2.0.13-1ubuntu1 on royal by sbuild/powerpc 1.170.5
Build started at 20080706-1738
******************************************************************************
Checking available source versions...
Fetching source files...
Reading package lists...
Building dependency tree...
Reading state information...
Need to get 2933kB of source archives.
Get:1 http://archive.internal intrepid-autotest/main openipmi 2.0.13-1ubuntu1 (dsc) [1130B]
Get:2 http://archive.internal intrepid-autotest/main openipmi 2.0.13-1ubuntu1 (tar) [2918kB]
Get:3 http://archive.internal intrepid-autotest/main openipmi 2.0.13-1ubuntu1 (diff) [13.8kB]
Fetched 2933kB in 0s (19.9MB/s)
Download complete and in download only mode
** Using build dependencies supplied by package:
Build-Depends: debhelper, libsnmp-dev, libpopt-dev, libncurses5-dev
Checking for already installed source dependencies...
debhelper: missing
libsnmp-dev: missing
libpopt-dev: missing
libncurses5-dev: missing
Checking for source dependency conflicts...
/usr/bin/sudo /usr/bin/apt-get --purge $CHROOT_OPTIONS -q -y install debhelper libsnmp-dev libpopt-dev libncurses5-dev
Reading package lists...
Building dependency tree...
Reading state information...
The following packages were automatically installed and are no longer required:
upstart-compat-sysv startup-tasks system-services sysvutils upstart
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
bsdmainutils file gettext gettext-base groff-base html2text intltool-debian
libmagic1 libperl5.10 libpopt0 libsensors-dev libsensors3 libsnmp-base
libsnmp-perl libsnmp15 libssl-dev libssl0.9.8 libsysfs2 libwrap0
libwrap0-dev man-db po-debconf procps zlib1g-dev
Suggested packages:
vacation wamerican wordlist whois dh-make cvs gettext-doc groff lm-sensors
less www-browser
Recommended packages:
curl wget lynx tcpd libmail-sendmail-perl libcompress-zlib-perl
libmail-box-perl psmisc
The following NEW packages will be installed:
bsdmainutils debhelper file gettext gettext-base groff-base html2text
intltool-debian libmagic1 libncurses5-dev libperl5.10 libpopt-dev libpopt0
libsensors-dev libsensors3 libsnmp-base libsnmp-dev libsnmp-perl libsnmp15
libssl-dev libssl0.9.8 libsysfs2 libwrap0 libwrap0-dev man-db po-debconf
procps zlib1g-dev
0 upgraded, 28 newly installed, 0 to remove and 0 not upgraded.
Need to get 0B/15.6MB of archives.
After unpacking 52.2MB of additional disk space will be used.
WARNING: The following packages cannot be authenticated!
gettext-base libpopt0 libssl0.9.8 libsysfs2 libwrap0 procps bsdmainutils
libmagic1 file groff-base man-db html2text gettext intltool-debian
po-debconf debhelper libncurses5-dev libperl5.10 libpopt-dev libsensors3
libsnmp-base libsnmp15 libsnmp-perl libwrap0-dev zlib1g-dev libssl-dev
libsensors-dev libsnmp-dev
Authentication warning overridden.
Selecting previously deselected package gettext-base.
(Reading database ... 10619 files and directories currently installed.)
Unpacking gettext-base (from .../gettext-base_0.17-3ubuntu1_powerpc.deb) ...
Selecting previously deselected package libpopt0.
Unpacking libpopt0 (from .../libpopt0_1.14-4_powerpc.deb) ...
Selecting previously deselected package libssl0.9.8.
Unpacking libssl0.9.8 (from .../libssl0.9.8_0.9.8g-10.1ubuntu1_powerpc.deb) ...
Selecting previously deselected package libsysfs2.
Unpacking libsysfs2 (from .../libsysfs2_2.1.0-4_powerpc.deb) ...
Selecting previously deselected package libwrap0.
Unpacking libwrap0 (from .../libwrap0_7.6.q-15_powerpc.deb) ...
Selecting previously deselected package procps.
Unpacking procps (from .../procps_1%3a3.2.7-8ubuntu2_powerpc.deb) ...
Selecting previously deselected package bsdmainutils.
Unpacking bsdmainutils (from .../bsdmainutils_6.1.10ubuntu2_powerpc.deb) ...
Selecting previously deselected package libmagic1.
Unpacking libmagic1 (from .../libmagic1_4.24-2ubuntu1_powerpc.deb) ...
Selecting previously deselected package file.
Unpacking file (from .../file_4.24-2ubuntu1_powerpc.deb) ...
Selecting previously deselected package groff-base.
Unpacking groff-base (from .../groff-base_1.18.1.1-20_powerpc.deb) ...
Selecting previously deselected package man-db.
Unpacking man-db (from .../man-db_2.5.2-1_powerpc.deb) ...
Selecting previously deselected package html2text.
Unpacking html2text (from .../html2text_1.3.2a-3build2_powerpc.deb) ...
Selecting previously deselected package gettext.
Unpacking gettext (from .../gettext_0.17-3ubuntu1_powerpc.deb) ...
Selecting previously deselected package intltool-debian.
Unpacking intltool-debian (from .../intltool-debian_0.35.0+20060710.1_all.deb) ...
Selecting previously deselected package po-debconf.
Unpacking po-debconf (from .../po-debconf_1.0.15_all.deb) ...
Selecting previously deselected package debhelper.
Unpacking debhelper (from .../debhelper_7.0.13ubuntu1_all.deb) ...
Selecting previously deselected package libncurses5-dev.
Unpacking libncurses5-dev (from .../libncurses5-dev_5.6+20071124-1ubuntu2_powerpc.deb) ...
Selecting previously deselected package libperl5.10.
Unpacking libperl5.10 (from .../libperl5.10_5.10.0-11_powerpc.deb) ...
Selecting previously deselected package libpopt-dev.
Unpacking libpopt-dev (from .../libpopt-dev_1.14-4_powerpc.deb) ...
Selecting previously deselected package libsensors3.
Unpacking libsensors3 (from .../libsensors3_1%3a2.10.7-1_powerpc.deb) ...
Selecting previously deselected package libsnmp-base.
Unpacking libsnmp-base (from .../libsnmp-base_5.4.1~dfsg-7.1ubuntu2_all.deb) ...
Selecting previously deselected package libsnmp15.
Unpacking libsnmp15 (from .../libsnmp15_5.4.1~dfsg-7.1ubuntu2_powerpc.deb) ...
Selecting previously deselected package libsnmp-perl.
Unpacking libsnmp-perl (from .../libsnmp-perl_5.4.1~dfsg-7.1ubuntu2_powerpc.deb) ...
Selecting previously deselected package libwrap0-dev.
Unpacking libwrap0-dev (from .../libwrap0-dev_7.6.q-15_powerpc.deb) ...
Selecting previously deselected package zlib1g-dev.
Unpacking zlib1g-dev (from .../zlib1g-dev_1%3a1.2.3.3.dfsg-12ubuntu1_powerpc.deb) ...
Selecting previously deselected package libssl-dev.
Unpacking libssl-dev (from .../libssl-dev_0.9.8g-10.1ubuntu1_powerpc.deb) ...
Selecting previously deselected package libsensors-dev.
Unpacking libsensors-dev (from .../libsensors-dev_1%3a2.10.7-1_powerpc.deb) ...
Selecting previously deselected package libsnmp-dev.
Unpacking libsnmp-dev (from .../libsnmp-dev_5.4.1~dfsg-7.1ubuntu2_powerpc.deb) ...
Setting up gettext-base (0.17-3ubuntu1) ...
Setting up libpopt0 (1.14-4) ...
Setting up libssl0.9.8 (0.9.8g-10.1ubuntu1) ...
Setting up libsysfs2 (2.1.0-4) ...
Setting up libwrap0 (7.6.q-15) ...
Setting up procps (3.2.7-8ubuntu2) ...
* Setting kernel variables (/etc/sysctl.conf)...
error: "kernel.maps_protect" is an unknown key
error: "vm.mmap_min_addr" is an unknown key
error: "dev.mac_hid.mouse_button_emulation" is an unknown key
error: "dev.mac_hid.mouse_button2_keycode" is an unknown key
error: "dev.mac_hid.mouse_button3_keycode" is an unknown key
...fail!
Setting up bsdmainutils (6.1.10ubuntu2) ...
Setting up libmagic1 (4.24-2ubuntu1) ...
Setting up file (4.24-2ubuntu1) ...
Setting up groff-base (1.18.1.1-20) ...
Setting up man-db (2.5.2-1) ...
Building database of manual pages ...
Setting up html2text (1.3.2a-3build2) ...
Setting up gettext (0.17-3ubuntu1) ...
Setting up intltool-debian (0.35.0+20060710.1) ...
Setting up po-debconf (1.0.15) ...
Setting up debhelper (7.0.13ubuntu1) ...
Setting up libncurses5-dev (5.6+20071124-1ubuntu2) ...
Setting up libperl5.10 (5.10.0-11) ...
Setting up libpopt-dev (1.14-4) ...
Setting up libsensors3 (2.10.7-1) ...
Creating config file /etc/sensors.conf with new version
Setting up libsnmp-base (5.4.1~dfsg-7.1ubuntu2) ...
Setting up libsnmp15 (5.4.1~dfsg-7.1ubuntu2) ...
Setting up libsnmp-perl (5.4.1~dfsg-7.1ubuntu2) ...
Setting up libwrap0-dev (7.6.q-15) ...
Setting up zlib1g-dev (1.2.3.3.dfsg-12ubuntu1) ...
Setting up libssl-dev (0.9.8g-10.1ubuntu1) ...
Setting up libsensors-dev (2.10.7-1) ...
Setting up libsnmp-dev (5.4.1~dfsg-7.1ubuntu2) ...
modified:
sbuild.conf
Checking correctness of source dependencies...
Toolchain package versions: libc6-dev_2.8~20080505-0ubuntu5 make_3.81-5 dpkg-dev_1.14.20ubuntu1 linux-libc-dev_2.6.25-1.2 gcc-4.3_4.3.1-3ubuntu1 g++-4.3_4.3.1-3ubuntu1 binutils_2.18.50.20080610-0ubuntu1 libstdc++6_4.3.1-3ubuntu1 libstdc++6-4.3-dev_4.3.1-3ubuntu1
------------------------------------------------------------------------------
dpkg-source: extracting openipmi in openipmi-2.0.13
dpkg-source: unpacking openipmi_2.0.13.orig.tar.gz
dpkg-source: applying /srv/royal.buildd/home/buildd/build-intrepid-autotest/openipmi_2.0.13-1ubuntu1.diff.gz
dpkg-buildpackage: set CFLAGS to default value: -g -O2
dpkg-buildpackage: set CPPFLAGS to default value:
dpkg-buildpackage: set LDFLAGS to default value: -Wl,-Bsymbolic-functions
dpkg-buildpackage: set FFLAGS to default value: -g -O2
dpkg-buildpackage: set CXXFLAGS to default value: -g -O2
dpkg-buildpackage: source package openipmi
dpkg-buildpackage: source version 2.0.13-1ubuntu1
dpkg-buildpackage: host architecture powerpc
/usr/bin/fakeroot debian/rules clean
dh_testdir
dh_testroot
rm -f build-arch-stamp #CONFIGURE-STAMP#
# Add here commands to clean up after the build process.
[ ! -f Makefile ] || /usr/bin/make distclean
dh_clean
debian/rules build
dh_testdir
# Add here commands to configure the package.
CFLAGS="-Wall -g -O2" ./configure --host=powerpc-linux-gnu \
--build=powerpc-linux-gnu \
--prefix=/usr \
--without-openssl \
--mandir=\${prefix}/share/man \
--infodir=\${prefix}/share/info \
--disable-rpath
checking build system type... powerpc-unknown-linux-gnu
checking host system type... powerpc-unknown-linux-gnu
checking target system type... powerpc-unknown-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... no
checking for mawk... mawk
checking whether make sets $(MAKE)... yes
checking for style of include used by make... GNU
checking for powerpc-linux-gnu-gcc... powerpc-linux-gnu-gcc
checking for C compiler default output file name... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C compiler... yes
checking whether powerpc-linux-gnu-gcc accepts -g... yes
checking for powerpc-linux-gnu-gcc option to accept ISO C89... none needed
checking dependency style of powerpc-linux-gnu-gcc... gcc3
checking how to run the C preprocessor... powerpc-linux-gnu-gcc -E
checking for grep that handles long lines and -e... /bin/grep
checking for egrep... /bin/grep -E
checking for ANSI C header files... yes
checking for sys/types.h... yes
checking for sys/stat.h... yes
checking for stdlib.h... yes
checking for string.h... yes
checking for memory.h... yes
checking for strings.h... yes
checking for inttypes.h... yes
checking for stdint.h... yes
checking for unistd.h... yes
checking execinfo.h usability... yes
checking execinfo.h presence... yes
checking for execinfo.h... yes
checking for powerpc-linux-gnu-gcc... (cached) powerpc-linux-gnu-gcc
checking whether we are using the GNU C compiler... (cached) yes
checking whether powerpc-linux-gnu-gcc accepts -g... (cached) yes
checking for powerpc-linux-gnu-gcc option to accept ISO C89... (cached) none needed
checking dependency style of powerpc-linux-gnu-gcc... (cached) gcc3
checking for a sed that does not truncate output... /bin/sed
checking for ld used by powerpc-linux-gnu-gcc... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking for /usr/bin/ld option to reload object files... -r
checking for BSD-compatible nm... /usr/bin/nm -B
checking whether ln -s works... yes
checking how to recognise dependent libraries... pass_all
checking dlfcn.h usability... yes
checking dlfcn.h presence... yes
checking for dlfcn.h... yes
checking for powerpc-linux-gnu-g++... powerpc-linux-gnu-g++
checking whether we are using the GNU C++ compiler... yes
checking whether powerpc-linux-gnu-g++ accepts -g... yes
checking dependency style of powerpc-linux-gnu-g++... gcc3
checking how to run the C++ preprocessor... powerpc-linux-gnu-g++ -E
checking for powerpc-linux-gnu-g77... no
checking for powerpc-linux-gnu-xlf... no
checking for powerpc-linux-gnu-f77... no
checking for powerpc-linux-gnu-frt... no
checking for powerpc-linux-gnu-pgf77... no
checking for powerpc-linux-gnu-cf77... no
checking for powerpc-linux-gnu-fort77... no
checking for powerpc-linux-gnu-fl32... no
checking for powerpc-linux-gnu-af77... no
checking for powerpc-linux-gnu-xlf90... no
checking for powerpc-linux-gnu-f90... no
checking for powerpc-linux-gnu-pgf90... no
checking for powerpc-linux-gnu-pghpf... no
checking for powerpc-linux-gnu-epcf90... no
checking for powerpc-linux-gnu-gfortran... no
checking for powerpc-linux-gnu-g95... no
checking for powerpc-linux-gnu-xlf95... no
checking for powerpc-linux-gnu-f95... no
checking for powerpc-linux-gnu-fort... no
checking for powerpc-linux-gnu-ifort... no
checking for powerpc-linux-gnu-ifc... no
checking for powerpc-linux-gnu-efc... no
checking for powerpc-linux-gnu-pgf95... no
checking for powerpc-linux-gnu-lf95... no
checking for powerpc-linux-gnu-ftn... no
checking for g77... no
checking for xlf... no
checking for f77... no
checking for frt... no
checking for pgf77... no
checking for cf77... no
checking for fort77... no
checking for fl32... no
checking for af77... no
checking for xlf90... no
checking for f90... no
checking for pgf90... no
checking for pghpf... no
checking for epcf90... no
checking for gfortran... no
checking for g95... no
checking for xlf95... no
checking for f95... no
checking for fort... no
checking for ifort... no
checking for ifc... no
checking for efc... no
checking for pgf95... no
checking for lf95... no
checking for ftn... no
checking whether we are using the GNU Fortran 77 compiler... no
checking whether accepts -g... no
checking the maximum length of command line arguments... 32768
checking command to parse /usr/bin/nm -B output from powerpc-linux-gnu-gcc object... ok
checking for objdir... .libs
checking for powerpc-linux-gnu-ar... no
checking for ar... ar
checking for powerpc-linux-gnu-ranlib... no
checking for ranlib... ranlib
checking for powerpc-linux-gnu-strip... no
checking for strip... strip
checking if powerpc-linux-gnu-gcc supports -fno-rtti -fno-exceptions... no
checking for powerpc-linux-gnu-gcc option to produce PIC... -fPIC
checking if powerpc-linux-gnu-gcc PIC flag -fPIC works... yes
checking if powerpc-linux-gnu-gcc static flag -static works... yes
checking if powerpc-linux-gnu-gcc supports -c -o file.o... yes
checking whether the powerpc-linux-gnu-gcc linker (/usr/bin/ld) supports shared libraries... yes
checking whether -lc should be explicitly linked in... no
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
checking whether stripping libraries is possible... yes
checking if libtool supports shared libraries... yes
checking whether to build shared libraries... yes
checking whether to build static libraries... yes
configure: creating libtool
appending configuration tag "CXX" to libtool
checking for ld used by powerpc-linux-gnu-g++... /usr/bin/ld
checking if the linker (/usr/bin/ld) is GNU ld... yes
checking whether the powerpc-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking for powerpc-linux-gnu-g++ option to produce PIC... -fPIC
checking if powerpc-linux-gnu-g++ PIC flag -fPIC works... yes
checking if powerpc-linux-gnu-g++ static flag -static works... yes
checking if powerpc-linux-gnu-g++ supports -c -o file.o... yes
checking whether the powerpc-linux-gnu-g++ linker (/usr/bin/ld) supports shared libraries... yes
checking dynamic linker characteristics... GNU/Linux ld.so
checking how to hardcode library paths into programs... immediate
appending configuration tag "F77" to libtool
checking for ANSI C header files... (cached) yes
checking for getaddrinfo... yes
checking popt.h usability... yes
checking popt.h presence... yes
checking for popt.h... yes
checking for poptHelpOptions in -lpopt... no
checking gdbm.h usability... no
checking gdbm.h presence... no
checking for gdbm.h... no
checking for pkg-config... no
checking for glib-config... no
checking for glib... no
checking for glib-config... no
checking for glib 1.2... no
./configure: line 21442: tclsh: command not found
checking tcl.h usability... no
checking tcl.h presence... no
checking for tcl.h... no
checking for /usr/include/tcl... no
checking for tcl... no
checking for perl... /usr/bin/perl
checking for perl threads... yes
checking for python... /usr/bin/python
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named distutils.sysconfig
Traceback (most recent call last):
File "<string>", line 1, in <module>
ImportError: No module named distutils.sysconfig
checking for python threads... yes
checking for tkinter... no
checking for swig... no
checking net-snmp/net-snmp-config.h usability... yes
checking net-snmp/net-snmp-config.h presence... yes
checking for net-snmp/net-snmp-config.h... yes
checking for snmp_add in -lnetsnmp... yes
checking for syslog... yes
checking for dia... no
checking for latex... no
checking for bibtex... no
checking for dvipdf... no
dia, latex, bibtex, and/or dvipdf is not present or not valid, you cannot regenerate documentation
The documentation comes already generated, so this is generally not a problem
checking for tgetent in -lcurses... yes
checking for working alloca.h... yes
checking for alloca... yes
checking for dirent.h that defines DIR... yes
checking for library containing opendir... none required
checking for ANSI C header files... (cached) yes
checking for sys/wait.h that is POSIX.1 compatible... yes
checking fcntl.h usability... yes
checking fcntl.h presence... yes
checking for fcntl.h... yes
checking limits.h usability... yes
checking limits.h presence... yes
checking for limits.h... yes
checking malloc.h usability... yes
checking malloc.h presence... yes
checking for malloc.h... yes
checking for stdlib.h... (cached) yes
checking for string.h... (cached) yes
checking sys/ioctl.h usability... yes
checking sys/ioctl.h presence... yes
checking for sys/ioctl.h... yes
checking sys/param.h usability... yes
checking sys/param.h presence... yes
checking for sys/param.h... yes
checking termios.h usability... yes
checking termios.h presence... yes
checking for termios.h... yes
checking for unistd.h... (cached) yes
checking curses.h usability... yes
checking curses.h presence... yes
checking for curses.h... yes
checking ncurses.h usability... yes
checking ncurses.h presence... yes
checking for ncurses.h... yes
checking sys/cdefs.h usability... yes
checking sys/cdefs.h presence... yes
checking for sys/cdefs.h... yes
checking for term.h... yes
checking for an ANSI C-conforming const... yes
checking for pid_t... yes
checking for size_t... yes
checking for u_int32_t... yes
checking whether closedir returns void... no
checking vfork.h usability... no
checking vfork.h presence... no
checking for vfork.h... no
checking for fork... yes
checking for vfork... yes
checking for working fork... yes
checking for working vfork... (cached) yes
checking for strlcpy... no
checking for strlcat... no
checking for fgetln... no
checking whether powerpc-linux-gnu-gcc needs -traditional... no
checking return type of signal handlers... void
checking whether lstat dereferences a symlink specified with a trailing slash... yes
checking whether stat accepts an empty string... no
checking for endpwent... yes
checking for isascii... yes
checking for memchr... yes
checking for memset... yes
checking for re_comp... yes
checking for regcomp... yes
checking for strcasecmp... yes
checking for strchr... yes
checking for strcspn... yes
checking for strdup... yes
checking for strerror... yes
checking for strrchr... yes
checking for strstr... yes
checking for strtol... yes
checking for issetugid... no
checking whether getpwnam_r and getpwuid_r are posix like... yes
checking whether getpwnam_r and getpwuid_r are posix _draft_ like... no
configure: creating ./config.status
config.status: creating Makefile
config.status: creating utils/Makefile
config.status: creating lib/Makefile
config.status: creating unix/Makefile
config.status: creating glib/Makefile
config.status: creating tcl/Makefile
config.status: creating ui/Makefile
config.status: creating lanserv/Makefile
config.status: creating sample/Makefile
config.status: creating doc/Makefile
config.status: creating man/Makefile
config.status: creating swig/Makefile
config.status: creating swig/perl/Makefile
config.status: creating swig/python/Makefile
config.status: creating swig/python/openipmigui/Makefile
config.status: creating libedit/Makefile
config.status: creating cmdlang/Makefile
config.status: creating include/Makefile
config.status: creating include/OpenIPMI/Makefile
config.status: creating include/OpenIPMI/ipmiif.h
config.status: creating include/OpenIPMI/internal/Makefile
config.status: creating include/linux/Makefile
config.status: creating OpenIPMI.spec
config.status: creating OpenIPMIutils.pc
config.status: creating OpenIPMI.pc
config.status: creating OpenIPMIpthread.pc
config.status: creating OpenIPMIposix.pc
config.status: creating OpenIPMIglib.pc
config.status: creating OpenIPMIglib12.pc
config.status: creating OpenIPMItcl.pc
config.status: creating OpenIPMIcmdlang.pc
config.status: creating OpenIPMIui.pc
config.status: creating config.h
config.status: executing depfiles commands
# Add here commands to compile the arch part of the package.
#/usr/bin/make
touch build-arch-stamp
/usr/bin/fakeroot debian/rules binary-arch
dh_testdir
dh_testroot
dh_clean -k -s
dh_installdirs -s
# Add here commands to install the arch part of the package into
# debian/tmp.
/usr/bin/make install DESTDIR=/build/buildd/openipmi-2.0.13/debian/tmp
make[1]: Entering directory `/build/buildd/openipmi-2.0.13'
Making install in include
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/include'
Making install in OpenIPMI
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
Making install in internal
make[4]: Entering directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI/internal'
make[5]: Entering directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI/internal'
make[5]: Nothing to be done for `install-exec-am'.
test -z "/usr/include/OpenIPMI/internal" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal"
/usr/bin/install -c -m 644 'ilist.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ilist.h'
/usr/bin/install -c -m 644 'ipmi_entity.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_entity.h'
/usr/bin/install -c -m 644 'ipmi_malloc.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_malloc.h'
/usr/bin/install -c -m 644 'ipmi_sensor.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_sensor.h'
/usr/bin/install -c -m 644 'md2.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/md2.h'
/usr/bin/install -c -m 644 'ipmi_control.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_control.h'
/usr/bin/install -c -m 644 'ipmi_int.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_int.h'
/usr/bin/install -c -m 644 'ipmi_mc.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_mc.h'
/usr/bin/install -c -m 644 'ipmi_utils.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_utils.h'
/usr/bin/install -c -m 644 'md5.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/md5.h'
/usr/bin/install -c -m 644 'ipmi_domain.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_domain.h'
/usr/bin/install -c -m 644 'ipmi_locks.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_locks.h'
/usr/bin/install -c -m 644 'ipmi_sel.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_sel.h'
/usr/bin/install -c -m 644 'locked_list.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/locked_list.h'
/usr/bin/install -c -m 644 'opq.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/opq.h'
/usr/bin/install -c -m 644 'ipmi_event.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_event.h'
/usr/bin/install -c -m 644 'ipmi_oem.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_oem.h'
/usr/bin/install -c -m 644 'ipmi_fru.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/internal/ipmi_fru.h'
make[5]: Leaving directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI/internal'
make[4]: Leaving directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI/internal'
make[4]: Entering directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
make[5]: Entering directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
make[5]: Nothing to be done for `install-exec-am'.
test -z "/usr/include/OpenIPMI" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI"
/usr/bin/install -c -m 644 'ipmi_addr.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_addr.h'
/usr/bin/install -c -m 644 'ipmi_err.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_err.h'
/usr/bin/install -c -m 644 'ipmi_log.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_log.h'
/usr/bin/install -c -m 644 'ipmi_posix.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_posix.h'
/usr/bin/install -c -m 644 'mxp.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/mxp.h'
/usr/bin/install -c -m 644 'ipmi_auth.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_auth.h'
/usr/bin/install -c -m 644 'ipmi_msgbits.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_msgbits.h'
/usr/bin/install -c -m 644 'ipmi_sdr.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_sdr.h'
/usr/bin/install -c -m 644 'os_handler.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/os_handler.h'
/usr/bin/install -c -m 644 'ipmi_bits.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_bits.h'
/usr/bin/install -c -m 644 'ipmi_fru.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_fru.h'
/usr/bin/install -c -m 644 'ipmi_glib.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_glib.h'
/usr/bin/install -c -m 644 'ipmi_smi.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_smi.h'
/usr/bin/install -c -m 644 'selector.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/selector.h'
/usr/bin/install -c -m 644 'ipmi_mc.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_mc.h'
/usr/bin/install -c -m 644 'ipmi_user.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_user.h'
/usr/bin/install -c -m 644 'ipmi_cmdlang.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_cmdlang.h'
/usr/bin/install -c -m 644 'ipmiif.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmiif.h'
/usr/bin/install -c -m 644 'ipmi_pef.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_pef.h'
/usr/bin/install -c -m 644 'ipmi_types.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_types.h'
/usr/bin/install -c -m 644 'ipmi_conn.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_conn.h'
/usr/bin/install -c -m 644 'ipmi_lan.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_lan.h'
/usr/bin/install -c -m 644 'ipmi_pet.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_pet.h'
/usr/bin/install -c -m 644 'ipmi_ui.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_ui.h'
/usr/bin/install -c -m 644 'ipmi_debug.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_debug.h'
/usr/bin/install -c -m 644 'ipmi_lanparm.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_lanparm.h'
/usr/bin/install -c -m 644 'ipmi_picmg.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_picmg.h'
/usr/bin/install -c -m 644 'lanserv.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/lanserv.h'
/usr/bin/install -c -m 644 'ipmi_sol.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_sol.h'
/usr/bin/install -c -m 644 'ipmi_solparm.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_solparm.h'
/usr/bin/install -c -m 644 'ipmi_tcl.h' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/include/OpenIPMI/ipmi_tcl.h'
make[5]: Leaving directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
make[4]: Leaving directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/include/OpenIPMI'
Making install in linux
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/include/linux'
make[4]: Entering directory `/build/buildd/openipmi-2.0.13/include/linux'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/build/buildd/openipmi-2.0.13/include/linux'
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/include/linux'
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/include'
make[4]: Entering directory `/build/buildd/openipmi-2.0.13/include'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/build/buildd/openipmi-2.0.13/include'
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/include'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/include'
Making install in utils
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/utils'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF ".deps/md5.Tpo" -c -o md5.lo md5.c; \
then mv -f ".deps/md5.Tpo" ".deps/md5.Plo"; else rm -f ".deps/md5.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -fPIC -DPIC -o .libs/md5.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -o md5.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md2.lo -MD -MP -MF ".deps/md2.Tpo" -c -o md2.lo md2.c; \
then mv -f ".deps/md2.Tpo" ".deps/md2.Plo"; else rm -f ".deps/md2.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md2.lo -MD -MP -MF .deps/md2.Tpo -c md2.c -fPIC -DPIC -o .libs/md2.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md2.lo -MD -MP -MF .deps/md2.Tpo -c md2.c -o md2.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_auth.lo -MD -MP -MF ".deps/ipmi_auth.Tpo" -c -o ipmi_auth.lo ipmi_auth.c; \
then mv -f ".deps/ipmi_auth.Tpo" ".deps/ipmi_auth.Plo"; else rm -f ".deps/ipmi_auth.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_auth.lo -MD -MP -MF .deps/ipmi_auth.Tpo -c ipmi_auth.c -fPIC -DPIC -o .libs/ipmi_auth.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_auth.lo -MD -MP -MF .deps/ipmi_auth.Tpo -c ipmi_auth.c -o ipmi_auth.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_malloc.lo -MD -MP -MF ".deps/ipmi_malloc.Tpo" -c -o ipmi_malloc.lo ipmi_malloc.c; \
then mv -f ".deps/ipmi_malloc.Tpo" ".deps/ipmi_malloc.Plo"; else rm -f ".deps/ipmi_malloc.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_malloc.lo -MD -MP -MF .deps/ipmi_malloc.Tpo -c ipmi_malloc.c -fPIC -DPIC -o .libs/ipmi_malloc.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_malloc.lo -MD -MP -MF .deps/ipmi_malloc.Tpo -c ipmi_malloc.c -o ipmi_malloc.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ilist.lo -MD -MP -MF ".deps/ilist.Tpo" -c -o ilist.lo ilist.c; \
then mv -f ".deps/ilist.Tpo" ".deps/ilist.Plo"; else rm -f ".deps/ilist.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ilist.lo -MD -MP -MF .deps/ilist.Tpo -c ilist.c -fPIC -DPIC -o .libs/ilist.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ilist.lo -MD -MP -MF .deps/ilist.Tpo -c ilist.c -o ilist.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locks.lo -MD -MP -MF ".deps/locks.Tpo" -c -o locks.lo locks.c; \
then mv -f ".deps/locks.Tpo" ".deps/locks.Plo"; else rm -f ".deps/locks.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locks.lo -MD -MP -MF .deps/locks.Tpo -c locks.c -fPIC -DPIC -o .libs/locks.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locks.lo -MD -MP -MF .deps/locks.Tpo -c locks.c -o locks.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hash.lo -MD -MP -MF ".deps/hash.Tpo" -c -o hash.lo hash.c; \
then mv -f ".deps/hash.Tpo" ".deps/hash.Plo"; else rm -f ".deps/hash.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hash.lo -MD -MP -MF .deps/hash.Tpo -c hash.c -fPIC -DPIC -o .libs/hash.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hash.lo -MD -MP -MF .deps/hash.Tpo -c hash.c -o hash.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locked_list.lo -MD -MP -MF ".deps/locked_list.Tpo" -c -o locked_list.lo locked_list.c; \
then mv -f ".deps/locked_list.Tpo" ".deps/locked_list.Plo"; else rm -f ".deps/locked_list.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locked_list.lo -MD -MP -MF .deps/locked_list.Tpo -c locked_list.c -fPIC -DPIC -o .libs/locked_list.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT locked_list.lo -MD -MP -MF .deps/locked_list.Tpo -c locked_list.c -o locked_list.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT os_handler.lo -MD -MP -MF ".deps/os_handler.Tpo" -c -o os_handler.lo os_handler.c; \
then mv -f ".deps/os_handler.Tpo" ".deps/os_handler.Plo"; else rm -f ".deps/os_handler.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT os_handler.lo -MD -MP -MF .deps/os_handler.Tpo -c os_handler.c -fPIC -DPIC -o .libs/os_handler.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT os_handler.lo -MD -MP -MF .deps/os_handler.Tpo -c os_handler.c -o os_handler.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIutils.la -rpath /usr/lib -rdynamic -version-info 0:1:0 -Wl,-Map -Wl,libOpenIPMIutils.map md5.lo md2.lo ipmi_auth.lo ipmi_malloc.lo ilist.lo locks.lo hash.lo locked_list.lo os_handler.lo -lcurses
powerpc-linux-gnu-gcc -shared .libs/md5.o .libs/md2.o .libs/ipmi_auth.o .libs/ipmi_malloc.o .libs/ilist.o .libs/locks.o .libs/hash.o .libs/locked_list.o .libs/os_handler.o -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIutils.map -Wl,-soname -Wl,libOpenIPMIutils.so.0 -o .libs/libOpenIPMIutils.so.0.0.1
(cd .libs && rm -f libOpenIPMIutils.so.0 && ln -s libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so.0)
(cd .libs && rm -f libOpenIPMIutils.so && ln -s libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so)
ar cru .libs/libOpenIPMIutils.a md5.o md2.o ipmi_auth.o ipmi_malloc.o ilist.o locks.o hash.o locked_list.o os_handler.o
ranlib .libs/libOpenIPMIutils.a
creating libOpenIPMIutils.la
(cd .libs && rm -f libOpenIPMIutils.la && ln -s ../libOpenIPMIutils.la libOpenIPMIutils.la)
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/utils'
test -z "/usr/lib" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMIutils.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.la'
/usr/bin/install -c .libs/libOpenIPMIutils.so.0.0.1 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.so.0.0.1
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so.0 || { rm -f libOpenIPMIutils.so.0 && ln -s libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so.0; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so || { rm -f libOpenIPMIutils.so && ln -s libOpenIPMIutils.so.0.0.1 libOpenIPMIutils.so; }; })
/usr/bin/install -c .libs/libOpenIPMIutils.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.la
/usr/bin/install -c .libs/libOpenIPMIutils.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIutils.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/utils'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/utils'
Making install in lib
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/lib'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT entity.lo -MD -MP -MF ".deps/entity.Tpo" -c -o entity.lo entity.c; \
then mv -f ".deps/entity.Tpo" ".deps/entity.Plo"; else rm -f ".deps/entity.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT entity.lo -MD -MP -MF .deps/entity.Tpo -c entity.c -fPIC -DPIC -o .libs/entity.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT entity.lo -MD -MP -MF .deps/entity.Tpo -c entity.c -o entity.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi.lo -MD -MP -MF ".deps/ipmi.Tpo" -c -o ipmi.lo ipmi.c; \
then mv -f ".deps/ipmi.Tpo" ".deps/ipmi.Plo"; else rm -f ".deps/ipmi.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi.lo -MD -MP -MF .deps/ipmi.Tpo -c ipmi.c -fPIC -DPIC -o .libs/ipmi.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi.lo -MD -MP -MF .deps/ipmi.Tpo -c ipmi.c -o ipmi.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT domain.lo -MD -MP -MF ".deps/domain.Tpo" -c -o domain.lo domain.c; \
then mv -f ".deps/domain.Tpo" ".deps/domain.Plo"; else rm -f ".deps/domain.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT domain.lo -MD -MP -MF .deps/domain.Tpo -c domain.c -fPIC -DPIC -o .libs/domain.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT domain.lo -MD -MP -MF .deps/domain.Tpo -c domain.c -o domain.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT mc.lo -MD -MP -MF ".deps/mc.Tpo" -c -o mc.lo mc.c; \
then mv -f ".deps/mc.Tpo" ".deps/mc.Plo"; else rm -f ".deps/mc.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT mc.lo -MD -MP -MF .deps/mc.Tpo -c mc.c -fPIC -DPIC -o .libs/mc.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT mc.lo -MD -MP -MF .deps/mc.Tpo -c mc.c -o mc.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sdr.lo -MD -MP -MF ".deps/sdr.Tpo" -c -o sdr.lo sdr.c; \
then mv -f ".deps/sdr.Tpo" ".deps/sdr.Plo"; else rm -f ".deps/sdr.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sdr.lo -MD -MP -MF .deps/sdr.Tpo -c sdr.c -fPIC -DPIC -o .libs/sdr.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sdr.lo -MD -MP -MF .deps/sdr.Tpo -c sdr.c -o sdr.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT control.lo -MD -MP -MF ".deps/control.Tpo" -c -o control.lo control.c; \
then mv -f ".deps/control.Tpo" ".deps/control.Plo"; else rm -f ".deps/control.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT control.lo -MD -MP -MF .deps/control.Tpo -c control.c -fPIC -DPIC -o .libs/control.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT control.lo -MD -MP -MF .deps/control.Tpo -c control.c -o control.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_utils.lo -MD -MP -MF ".deps/ipmi_utils.Tpo" -c -o ipmi_utils.lo ipmi_utils.c; \
then mv -f ".deps/ipmi_utils.Tpo" ".deps/ipmi_utils.Plo"; else rm -f ".deps/ipmi_utils.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_utils.lo -MD -MP -MF .deps/ipmi_utils.Tpo -c ipmi_utils.c -fPIC -DPIC -o .libs/ipmi_utils.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_utils.lo -MD -MP -MF .deps/ipmi_utils.Tpo -c ipmi_utils.c -o ipmi_utils.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT conn.lo -MD -MP -MF ".deps/conn.Tpo" -c -o conn.lo conn.c; \
then mv -f ".deps/conn.Tpo" ".deps/conn.Plo"; else rm -f ".deps/conn.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT conn.lo -MD -MP -MF .deps/conn.Tpo -c conn.c -fPIC -DPIC -o .libs/conn.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT conn.lo -MD -MP -MF .deps/conn.Tpo -c conn.c -o conn.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru.lo -MD -MP -MF ".deps/fru.Tpo" -c -o fru.lo fru.c; \
then mv -f ".deps/fru.Tpo" ".deps/fru.Plo"; else rm -f ".deps/fru.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru.lo -MD -MP -MF .deps/fru.Tpo -c fru.c -fPIC -DPIC -o .libs/fru.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru.lo -MD -MP -MF .deps/fru.Tpo -c fru.c -o fru.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT chassis.lo -MD -MP -MF ".deps/chassis.Tpo" -c -o chassis.lo chassis.c; \
then mv -f ".deps/chassis.Tpo" ".deps/chassis.Plo"; else rm -f ".deps/chassis.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT chassis.lo -MD -MP -MF .deps/chassis.Tpo -c chassis.c -fPIC -DPIC -o .libs/chassis.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT chassis.lo -MD -MP -MF .deps/chassis.Tpo -c chassis.c -o chassis.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pet.lo -MD -MP -MF ".deps/pet.Tpo" -c -o pet.lo pet.c; \
then mv -f ".deps/pet.Tpo" ".deps/pet.Plo"; else rm -f ".deps/pet.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pet.lo -MD -MP -MF .deps/pet.Tpo -c pet.c -fPIC -DPIC -o .libs/pet.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pet.lo -MD -MP -MF .deps/pet.Tpo -c pet.c -o pet.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT event.lo -MD -MP -MF ".deps/event.Tpo" -c -o event.lo event.c; \
then mv -f ".deps/event.Tpo" ".deps/event.Plo"; else rm -f ".deps/event.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT event.lo -MD -MP -MF .deps/event.Tpo -c event.c -fPIC -DPIC -o .libs/event.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT event.lo -MD -MP -MF .deps/event.Tpo -c event.c -o event.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT opq.lo -MD -MP -MF ".deps/opq.Tpo" -c -o opq.lo opq.c; \
then mv -f ".deps/opq.Tpo" ".deps/opq.Plo"; else rm -f ".deps/opq.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT opq.lo -MD -MP -MF .deps/opq.Tpo -c opq.c -fPIC -DPIC -o .libs/opq.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT opq.lo -MD -MP -MF .deps/opq.Tpo -c opq.c -o opq.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sel.lo -MD -MP -MF ".deps/sel.Tpo" -c -o sel.lo sel.c; \
then mv -f ".deps/sel.Tpo" ".deps/sel.Plo"; else rm -f ".deps/sel.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sel.lo -MD -MP -MF .deps/sel.Tpo -c sel.c -fPIC -DPIC -o .libs/sel.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sel.lo -MD -MP -MF .deps/sel.Tpo -c sel.c -o sel.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sensor.lo -MD -MP -MF ".deps/sensor.Tpo" -c -o sensor.lo sensor.c; \
then mv -f ".deps/sensor.Tpo" ".deps/sensor.Plo"; else rm -f ".deps/sensor.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sensor.lo -MD -MP -MF .deps/sensor.Tpo -c sensor.c -fPIC -DPIC -o .libs/sensor.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT sensor.lo -MD -MP -MF .deps/sensor.Tpo -c sensor.c -o sensor.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pef.lo -MD -MP -MF ".deps/pef.Tpo" -c -o pef.lo pef.c; \
then mv -f ".deps/pef.Tpo" ".deps/pef.Plo"; else rm -f ".deps/pef.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pef.lo -MD -MP -MF .deps/pef.Tpo -c pef.c -fPIC -DPIC -o .libs/pef.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT pef.lo -MD -MP -MF .deps/pef.Tpo -c pef.c -o pef.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanparm.lo -MD -MP -MF ".deps/lanparm.Tpo" -c -o lanparm.lo lanparm.c; \
then mv -f ".deps/lanparm.Tpo" ".deps/lanparm.Plo"; else rm -f ".deps/lanparm.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanparm.lo -MD -MP -MF .deps/lanparm.Tpo -c lanparm.c -fPIC -DPIC -o .libs/lanparm.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanparm.lo -MD -MP -MF .deps/lanparm.Tpo -c lanparm.c -o lanparm.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT strings.lo -MD -MP -MF ".deps/strings.Tpo" -c -o strings.lo strings.c; \
then mv -f ".deps/strings.Tpo" ".deps/strings.Plo"; else rm -f ".deps/strings.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT strings.lo -MD -MP -MF .deps/strings.Tpo -c strings.c -fPIC -DPIC -o .libs/strings.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT strings.lo -MD -MP -MF .deps/strings.Tpo -c strings.c -o strings.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT normal_fru.lo -MD -MP -MF ".deps/normal_fru.Tpo" -c -o normal_fru.lo normal_fru.c; \
then mv -f ".deps/normal_fru.Tpo" ".deps/normal_fru.Plo"; else rm -f ".deps/normal_fru.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT normal_fru.lo -MD -MP -MF .deps/normal_fru.Tpo -c normal_fru.c -fPIC -DPIC -o .libs/normal_fru.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT normal_fru.lo -MD -MP -MF .deps/normal_fru.Tpo -c normal_fru.c -o normal_fru.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_force_conn.lo -MD -MP -MF ".deps/oem_force_conn.Tpo" -c -o oem_force_conn.lo oem_force_conn.c; \
then mv -f ".deps/oem_force_conn.Tpo" ".deps/oem_force_conn.Plo"; else rm -f ".deps/oem_force_conn.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_force_conn.lo -MD -MP -MF .deps/oem_force_conn.Tpo -c oem_force_conn.c -fPIC -DPIC -o .libs/oem_force_conn.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_force_conn.lo -MD -MP -MF .deps/oem_force_conn.Tpo -c oem_force_conn.c -o oem_force_conn.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_motorola_mxp.lo -MD -MP -MF ".deps/oem_motorola_mxp.Tpo" -c -o oem_motorola_mxp.lo oem_motorola_mxp.c; \
then mv -f ".deps/oem_motorola_mxp.Tpo" ".deps/oem_motorola_mxp.Plo"; else rm -f ".deps/oem_motorola_mxp.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_motorola_mxp.lo -MD -MP -MF .deps/oem_motorola_mxp.Tpo -c oem_motorola_mxp.c -fPIC -DPIC -o .libs/oem_motorola_mxp.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_motorola_mxp.lo -MD -MP -MF .deps/oem_motorola_mxp.Tpo -c oem_motorola_mxp.c -o oem_motorola_mxp.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_conn.lo -MD -MP -MF ".deps/oem_atca_conn.Tpo" -c -o oem_atca_conn.lo oem_atca_conn.c; \
then mv -f ".deps/oem_atca_conn.Tpo" ".deps/oem_atca_conn.Plo"; else rm -f ".deps/oem_atca_conn.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_conn.lo -MD -MP -MF .deps/oem_atca_conn.Tpo -c oem_atca_conn.c -fPIC -DPIC -o .libs/oem_atca_conn.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_conn.lo -MD -MP -MF .deps/oem_atca_conn.Tpo -c oem_atca_conn.c -o oem_atca_conn.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca.lo -MD -MP -MF ".deps/oem_atca.Tpo" -c -o oem_atca.lo oem_atca.c; \
then mv -f ".deps/oem_atca.Tpo" ".deps/oem_atca.Plo"; else rm -f ".deps/oem_atca.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca.lo -MD -MP -MF .deps/oem_atca.Tpo -c oem_atca.c -fPIC -DPIC -o .libs/oem_atca.o
oem_atca.c: In function 'atca_event_handler':
oem_atca.c:4180: warning: array subscript is above array bounds
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca.lo -MD -MP -MF .deps/oem_atca.Tpo -c oem_atca.c -o oem_atca.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_lan.lo -MD -MP -MF ".deps/ipmi_lan.Tpo" -c -o ipmi_lan.lo ipmi_lan.c; \
then mv -f ".deps/ipmi_lan.Tpo" ".deps/ipmi_lan.Plo"; else rm -f ".deps/ipmi_lan.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_lan.lo -MD -MP -MF .deps/ipmi_lan.Tpo -c ipmi_lan.c -fPIC -DPIC -o .libs/ipmi_lan.o
ipmi_lan.c: In function 'data_handler':
ipmi_lan.c:3454: warning: 'addr_num' may be used uninitialized in this function
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_lan.lo -MD -MP -MF .deps/ipmi_lan.Tpo -c ipmi_lan.c -o ipmi_lan.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_test.lo -MD -MP -MF ".deps/oem_test.Tpo" -c -o oem_test.lo oem_test.c; \
then mv -f ".deps/oem_test.Tpo" ".deps/oem_test.Plo"; else rm -f ".deps/oem_test.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_test.lo -MD -MP -MF .deps/oem_test.Tpo -c oem_test.c -fPIC -DPIC -o .libs/oem_test.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_test.lo -MD -MP -MF .deps/oem_test.Tpo -c oem_test.c -o oem_test.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_intel.lo -MD -MP -MF ".deps/oem_intel.Tpo" -c -o oem_intel.lo oem_intel.c; \
then mv -f ".deps/oem_intel.Tpo" ".deps/oem_intel.Plo"; else rm -f ".deps/oem_intel.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_intel.lo -MD -MP -MF .deps/oem_intel.Tpo -c oem_intel.c -fPIC -DPIC -o .libs/oem_intel.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_intel.lo -MD -MP -MF .deps/oem_intel.Tpo -c oem_intel.c -o oem_intel.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_payload.lo -MD -MP -MF ".deps/ipmi_payload.Tpo" -c -o ipmi_payload.lo ipmi_payload.c; \
then mv -f ".deps/ipmi_payload.Tpo" ".deps/ipmi_payload.Plo"; else rm -f ".deps/ipmi_payload.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_payload.lo -MD -MP -MF .deps/ipmi_payload.Tpo -c ipmi_payload.c -fPIC -DPIC -o .libs/ipmi_payload.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_payload.lo -MD -MP -MF .deps/ipmi_payload.Tpo -c ipmi_payload.c -o ipmi_payload.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT rakp.lo -MD -MP -MF ".deps/rakp.Tpo" -c -o rakp.lo rakp.c; \
then mv -f ".deps/rakp.Tpo" ".deps/rakp.Plo"; else rm -f ".deps/rakp.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT rakp.lo -MD -MP -MF .deps/rakp.Tpo -c rakp.c -fPIC -DPIC -o .libs/rakp.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT rakp.lo -MD -MP -MF .deps/rakp.Tpo -c rakp.c -o rakp.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT aes_cbc.lo -MD -MP -MF ".deps/aes_cbc.Tpo" -c -o aes_cbc.lo aes_cbc.c; \
then mv -f ".deps/aes_cbc.Tpo" ".deps/aes_cbc.Plo"; else rm -f ".deps/aes_cbc.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT aes_cbc.lo -MD -MP -MF .deps/aes_cbc.Tpo -c aes_cbc.c -fPIC -DPIC -o .libs/aes_cbc.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT aes_cbc.lo -MD -MP -MF .deps/aes_cbc.Tpo -c aes_cbc.c -o aes_cbc.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hmac.lo -MD -MP -MF ".deps/hmac.Tpo" -c -o hmac.lo hmac.c; \
then mv -f ".deps/hmac.Tpo" ".deps/hmac.Plo"; else rm -f ".deps/hmac.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hmac.lo -MD -MP -MF .deps/hmac.Tpo -c hmac.c -fPIC -DPIC -o .libs/hmac.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT hmac.lo -MD -MP -MF .deps/hmac.Tpo -c hmac.c -o hmac.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF ".deps/md5.Tpo" -c -o md5.lo md5.c; \
then mv -f ".deps/md5.Tpo" ".deps/md5.Plo"; else rm -f ".deps/md5.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -fPIC -DPIC -o .libs/md5.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT md5.lo -MD -MP -MF .deps/md5.Tpo -c md5.c -o md5.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_smi.lo -MD -MP -MF ".deps/ipmi_smi.Tpo" -c -o ipmi_smi.lo ipmi_smi.c; \
then mv -f ".deps/ipmi_smi.Tpo" ".deps/ipmi_smi.Plo"; else rm -f ".deps/ipmi_smi.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_smi.lo -MD -MP -MF .deps/ipmi_smi.Tpo -c ipmi_smi.c -fPIC -DPIC -o .libs/ipmi_smi.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_smi.lo -MD -MP -MF .deps/ipmi_smi.Tpo -c ipmi_smi.c -o ipmi_smi.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_sol.lo -MD -MP -MF ".deps/ipmi_sol.Tpo" -c -o ipmi_sol.lo ipmi_sol.c; \
then mv -f ".deps/ipmi_sol.Tpo" ".deps/ipmi_sol.Plo"; else rm -f ".deps/ipmi_sol.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_sol.lo -MD -MP -MF .deps/ipmi_sol.Tpo -c ipmi_sol.c -fPIC -DPIC -o .libs/ipmi_sol.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmi_sol.lo -MD -MP -MF .deps/ipmi_sol.Tpo -c ipmi_sol.c -o ipmi_sol.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_kontron_conn.lo -MD -MP -MF ".deps/oem_kontron_conn.Tpo" -c -o oem_kontron_conn.lo oem_kontron_conn.c; \
then mv -f ".deps/oem_kontron_conn.Tpo" ".deps/oem_kontron_conn.Plo"; else rm -f ".deps/oem_kontron_conn.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_kontron_conn.lo -MD -MP -MF .deps/oem_kontron_conn.Tpo -c oem_kontron_conn.c -fPIC -DPIC -o .libs/oem_kontron_conn.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_kontron_conn.lo -MD -MP -MF .deps/oem_kontron_conn.Tpo -c oem_kontron_conn.c -o oem_kontron_conn.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_fru.lo -MD -MP -MF ".deps/oem_atca_fru.Tpo" -c -o oem_atca_fru.lo oem_atca_fru.c; \
then mv -f ".deps/oem_atca_fru.Tpo" ".deps/oem_atca_fru.Plo"; else rm -f ".deps/oem_atca_fru.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_fru.lo -MD -MP -MF .deps/oem_atca_fru.Tpo -c oem_atca_fru.c -fPIC -DPIC -o .libs/oem_atca_fru.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT oem_atca_fru.lo -MD -MP -MF .deps/oem_atca_fru.Tpo -c oem_atca_fru.c -o oem_atca_fru.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru_spd_decode.lo -MD -MP -MF ".deps/fru_spd_decode.Tpo" -c -o fru_spd_decode.lo fru_spd_decode.c; \
then mv -f ".deps/fru_spd_decode.Tpo" ".deps/fru_spd_decode.Plo"; else rm -f ".deps/fru_spd_decode.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru_spd_decode.lo -MD -MP -MF .deps/fru_spd_decode.Tpo -c fru_spd_decode.c -fPIC -DPIC -o .libs/fru_spd_decode.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT fru_spd_decode.lo -MD -MP -MF .deps/fru_spd_decode.Tpo -c fru_spd_decode.c -o fru_spd_decode.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT solparm.lo -MD -MP -MF ".deps/solparm.Tpo" -c -o solparm.lo solparm.c; \
then mv -f ".deps/solparm.Tpo" ".deps/solparm.Plo"; else rm -f ".deps/solparm.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT solparm.lo -MD -MP -MF .deps/solparm.Tpo -c solparm.c -fPIC -DPIC -o .libs/solparm.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT solparm.lo -MD -MP -MF .deps/solparm.Tpo -c solparm.c -o solparm.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMI.la -rpath /usr/lib -rdynamic -version-info 0:5:0 -Wl,-Map -Wl,libOpenIPMI.map entity.lo ipmi.lo domain.lo mc.lo sdr.lo control.lo ipmi_utils.lo conn.lo fru.lo chassis.lo pet.lo event.lo opq.lo sel.lo sensor.lo pef.lo lanparm.lo strings.lo normal_fru.lo oem_force_conn.lo oem_motorola_mxp.lo oem_atca_conn.lo oem_atca.lo ipmi_lan.lo oem_test.lo oem_intel.lo ipmi_payload.lo rakp.lo aes_cbc.lo hmac.lo md5.lo ipmi_smi.lo ipmi_sol.lo oem_kontron_conn.lo oem_atca_fru.lo fru_spd_decode.lo solparm.lo -lm ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -shared .libs/entity.o .libs/ipmi.o .libs/domain.o .libs/mc.o .libs/sdr.o .libs/control.o .libs/ipmi_utils.o .libs/conn.o .libs/fru.o .libs/chassis.o .libs/pet.o .libs/event.o .libs/opq.o .libs/sel.o .libs/sensor.o .libs/pef.o .libs/lanparm.o .libs/strings.o .libs/normal_fru.o .libs/oem_force_conn.o .libs/oem_motorola_mxp.o .libs/oem_atca_conn.o .libs/oem_atca.o .libs/ipmi_lan.o .libs/oem_test.o .libs/oem_intel.o .libs/ipmi_payload.o .libs/rakp.o .libs/aes_cbc.o .libs/hmac.o .libs/md5.o .libs/ipmi_smi.o .libs/ipmi_sol.o .libs/oem_kontron_conn.o .libs/oem_atca_fru.o .libs/fru_spd_decode.o .libs/solparm.o -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/utils/.libs -lm ../utils/.libs/libOpenIPMIutils.so -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMI.map -Wl,-soname -Wl,libOpenIPMI.so.0 -o .libs/libOpenIPMI.so.0.0.5
(cd .libs && rm -f libOpenIPMI.so.0 && ln -s libOpenIPMI.so.0.0.5 libOpenIPMI.so.0)
(cd .libs && rm -f libOpenIPMI.so && ln -s libOpenIPMI.so.0.0.5 libOpenIPMI.so)
ar cru .libs/libOpenIPMI.a entity.o ipmi.o domain.o mc.o sdr.o control.o ipmi_utils.o conn.o fru.o chassis.o pet.o event.o opq.o sel.o sensor.o pef.o lanparm.o strings.o normal_fru.o oem_force_conn.o oem_motorola_mxp.o oem_atca_conn.o oem_atca.o ipmi_lan.o oem_test.o oem_intel.o ipmi_payload.o rakp.o aes_cbc.o hmac.o md5.o ipmi_smi.o ipmi_sol.o oem_kontron_conn.o oem_atca_fru.o fru_spd_decode.o solparm.o
ranlib .libs/libOpenIPMI.a
creating libOpenIPMI.la
(cd .libs && rm -f libOpenIPMI.la && ln -s ../libOpenIPMI.la libOpenIPMI.la)
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/lib'
test -z "/usr/lib" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMI.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.la'
libtool: install: warning: relinking `libOpenIPMI.la'
(cd /build/buildd/openipmi-2.0.13/lib; /bin/bash ../libtool --tag=CC --mode=relink powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMI.la -rpath /usr/lib -rdynamic -version-info 0:5:0 -Wl,-Map -Wl,libOpenIPMI.map entity.lo ipmi.lo domain.lo mc.lo sdr.lo control.lo ipmi_utils.lo conn.lo fru.lo chassis.lo pet.lo event.lo opq.lo sel.lo sensor.lo pef.lo lanparm.lo strings.lo normal_fru.lo oem_force_conn.lo oem_motorola_mxp.lo oem_atca_conn.lo oem_atca.lo ipmi_lan.lo oem_test.lo oem_intel.lo ipmi_payload.lo rakp.lo aes_cbc.lo hmac.lo md5.lo ipmi_smi.lo ipmi_sol.lo oem_kontron_conn.lo oem_atca_fru.lo fru_spd_decode.lo solparm.lo -lm ../utils/libOpenIPMIutils.la -lcurses -inst-prefix-dir /build/buildd/openipmi-2.0.13/debian/tmp)
powerpc-linux-gnu-gcc -shared .libs/entity.o .libs/ipmi.o .libs/domain.o .libs/mc.o .libs/sdr.o .libs/control.o .libs/ipmi_utils.o .libs/conn.o .libs/fru.o .libs/chassis.o .libs/pet.o .libs/event.o .libs/opq.o .libs/sel.o .libs/sensor.o .libs/pef.o .libs/lanparm.o .libs/strings.o .libs/normal_fru.o .libs/oem_force_conn.o .libs/oem_motorola_mxp.o .libs/oem_atca_conn.o .libs/oem_atca.o .libs/ipmi_lan.o .libs/oem_test.o .libs/oem_intel.o .libs/ipmi_payload.o .libs/rakp.o .libs/aes_cbc.o .libs/hmac.o .libs/md5.o .libs/ipmi_smi.o .libs/ipmi_sol.o .libs/oem_kontron_conn.o .libs/oem_atca_fru.o .libs/fru_spd_decode.o .libs/solparm.o -lm -L/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib -L/usr/lib -lOpenIPMIutils -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMI.map -Wl,-soname -Wl,libOpenIPMI.so.0 -o .libs/libOpenIPMI.so.0.0.5
/usr/bin/install -c .libs/libOpenIPMI.so.0.0.5T /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.so.0.0.5
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMI.so.0.0.5 libOpenIPMI.so.0 || { rm -f libOpenIPMI.so.0 && ln -s libOpenIPMI.so.0.0.5 libOpenIPMI.so.0; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMI.so.0.0.5 libOpenIPMI.so || { rm -f libOpenIPMI.so && ln -s libOpenIPMI.so.0.0.5 libOpenIPMI.so; }; })
/usr/bin/install -c .libs/libOpenIPMI.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.la
/usr/bin/install -c .libs/libOpenIPMI.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMI.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/lib'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/lib'
Making install in unix
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/unix'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_os_hnd.lo -MD -MP -MF ".deps/posix_os_hnd.Tpo" -c -o posix_os_hnd.lo posix_os_hnd.c; \
then mv -f ".deps/posix_os_hnd.Tpo" ".deps/posix_os_hnd.Plo"; else rm -f ".deps/posix_os_hnd.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_os_hnd.lo -MD -MP -MF .deps/posix_os_hnd.Tpo -c posix_os_hnd.c -fPIC -DPIC -o .libs/posix_os_hnd.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_os_hnd.lo -MD -MP -MF .deps/posix_os_hnd.Tpo -c posix_os_hnd.c -o posix_os_hnd.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT selector.lo -MD -MP -MF ".deps/selector.Tpo" -c -o selector.lo selector.c; \
then mv -f ".deps/selector.Tpo" ".deps/selector.Plo"; else rm -f ".deps/selector.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT selector.lo -MD -MP -MF .deps/selector.Tpo -c selector.c -fPIC -DPIC -o .libs/selector.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT selector.lo -MD -MP -MF .deps/selector.Tpo -c selector.c -o selector.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIposix.la -rpath /usr/lib -rdynamic -version-info 0:1:0 -Wl,-Map -Wl,libOpenIPMIposix.map -R/usr/lib posix_os_hnd.lo selector.lo ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -shared .libs/posix_os_hnd.o .libs/selector.o -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/utils/.libs -Wl,--rpath -Wl,/usr/lib ../utils/.libs/libOpenIPMIutils.so -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIposix.map -Wl,-soname -Wl,libOpenIPMIposix.so.0 -o .libs/libOpenIPMIposix.so.0.0.1
(cd .libs && rm -f libOpenIPMIposix.so.0 && ln -s libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so.0)
(cd .libs && rm -f libOpenIPMIposix.so && ln -s libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so)
ar cru .libs/libOpenIPMIposix.a posix_os_hnd.o selector.o
ranlib .libs/libOpenIPMIposix.a
creating libOpenIPMIposix.la
(cd .libs && rm -f libOpenIPMIposix.la && ln -s ../libOpenIPMIposix.la libOpenIPMIposix.la)
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_thread_os_hnd.lo -MD -MP -MF ".deps/posix_thread_os_hnd.Tpo" -c -o posix_thread_os_hnd.lo posix_thread_os_hnd.c; \
then mv -f ".deps/posix_thread_os_hnd.Tpo" ".deps/posix_thread_os_hnd.Plo"; else rm -f ".deps/posix_thread_os_hnd.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_thread_os_hnd.lo -MD -MP -MF .deps/posix_thread_os_hnd.Tpo -c posix_thread_os_hnd.c -fPIC -DPIC -o .libs/posix_thread_os_hnd.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT posix_thread_os_hnd.lo -MD -MP -MF .deps/posix_thread_os_hnd.Tpo -c posix_thread_os_hnd.c -o posix_thread_os_hnd.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIpthread.la -rpath /usr/lib -rdynamic -version-info 0:1:0 -Wl,-Map -Wl,libOpenIPMIpthread.map posix_thread_os_hnd.lo selector.lo -lpthread ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -shared .libs/posix_thread_os_hnd.o .libs/selector.o -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/utils/.libs -lpthread ../utils/.libs/libOpenIPMIutils.so -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIpthread.map -Wl,-soname -Wl,libOpenIPMIpthread.so.0 -o .libs/libOpenIPMIpthread.so.0.0.1
(cd .libs && rm -f libOpenIPMIpthread.so.0 && ln -s libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so.0)
(cd .libs && rm -f libOpenIPMIpthread.so && ln -s libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so)
ar cru .libs/libOpenIPMIpthread.a posix_thread_os_hnd.o selector.o
ranlib .libs/libOpenIPMIpthread.a
creating libOpenIPMIpthread.la
(cd .libs && rm -f libOpenIPMIpthread.la && ln -s ../libOpenIPMIpthread.la libOpenIPMIpthread.la)
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT test_heap.o -MD -MP -MF ".deps/test_heap.Tpo" -c -o test_heap.o test_heap.c; \
then mv -f ".deps/test_heap.Tpo" ".deps/test_heap.Po"; else rm -f ".deps/test_heap.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o test_heap test_heap.o -lcurses
powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o test_heap test_heap.o -lcurses
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -Wall -g -O2 -MT test_handlers.o -MD -MP -MF ".deps/test_handlers.Tpo" -c -o test_handlers.o test_handlers.c; \
then mv -f ".deps/test_handlers.Tpo" ".deps/test_handlers.Po"; else rm -f ".deps/test_handlers.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o test_handlers test_handlers.o libOpenIPMIposix.la libOpenIPMIpthread.la ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o .libs/test_handlers test_handlers.o ./.libs/libOpenIPMIposix.so ./.libs/libOpenIPMIpthread.so ../utils/.libs/libOpenIPMIutils.so -lcurses
creating test_handlers
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/unix'
test -z "/usr/lib" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMIposix.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.la'
libtool: install: warning: relinking `libOpenIPMIposix.la'
(cd /build/buildd/openipmi-2.0.13/unix; /bin/bash ../libtool --tag=CC --mode=relink powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIposix.la -rpath /usr/lib -rdynamic -version-info 0:1:0 -Wl,-Map -Wl,libOpenIPMIposix.map -R/usr/lib posix_os_hnd.lo selector.lo ../utils/libOpenIPMIutils.la -lcurses -inst-prefix-dir /build/buildd/openipmi-2.0.13/debian/tmp)
powerpc-linux-gnu-gcc -shared .libs/posix_os_hnd.o .libs/selector.o -Wl,--rpath -Wl,/usr/lib -L/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib -L/usr/lib -lOpenIPMIutils -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIposix.map -Wl,-soname -Wl,libOpenIPMIposix.so.0 -o .libs/libOpenIPMIposix.so.0.0.1
/usr/bin/install -c .libs/libOpenIPMIposix.so.0.0.1T /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.so.0.0.1
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so.0 || { rm -f libOpenIPMIposix.so.0 && ln -s libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so.0; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so || { rm -f libOpenIPMIposix.so && ln -s libOpenIPMIposix.so.0.0.1 libOpenIPMIposix.so; }; })
/usr/bin/install -c .libs/libOpenIPMIposix.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.la
/usr/bin/install -c .libs/libOpenIPMIposix.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIposix.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMIpthread.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.la'
libtool: install: warning: relinking `libOpenIPMIpthread.la'
(cd /build/buildd/openipmi-2.0.13/unix; /bin/bash ../libtool --tag=CC --mode=relink powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIpthread.la -rpath /usr/lib -rdynamic -version-info 0:1:0 -Wl,-Map -Wl,libOpenIPMIpthread.map posix_thread_os_hnd.lo selector.lo -lpthread ../utils/libOpenIPMIutils.la -lcurses -inst-prefix-dir /build/buildd/openipmi-2.0.13/debian/tmp)
powerpc-linux-gnu-gcc -shared .libs/posix_thread_os_hnd.o .libs/selector.o -lpthread -L/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib -L/usr/lib -lOpenIPMIutils -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIpthread.map -Wl,-soname -Wl,libOpenIPMIpthread.so.0 -o .libs/libOpenIPMIpthread.so.0.0.1
/usr/bin/install -c .libs/libOpenIPMIpthread.so.0.0.1T /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.so.0.0.1
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so.0 || { rm -f libOpenIPMIpthread.so.0 && ln -s libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so.0; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so || { rm -f libOpenIPMIpthread.so && ln -s libOpenIPMIpthread.so.0.0.1 libOpenIPMIpthread.so; }; })
/usr/bin/install -c .libs/libOpenIPMIpthread.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.la
/usr/bin/install -c .libs/libOpenIPMIpthread.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIpthread.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/unix'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/unix'
Making install in libedit
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/libedit'
sh ./makelist -h ./vi.c > vi.h
sh ./makelist -h ./emacs.c > emacs.h
sh ./makelist -h ./common.c > common.h
sh ./makelist -fh vi.h emacs.h common.h > fcns.h
sh ./makelist -bh ./vi.c ./emacs.c ./common.c > help.h
sh ./makelist -fc vi.h emacs.h common.h > fcns.c
sh ./makelist -bc ./vi.c ./emacs.c ./common.c > help.c
/usr/bin/make install-am
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/libedit'
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT chared.o -MD -MP -MF ".deps/chared.Tpo" -c -o chared.o chared.c; \
then mv -f ".deps/chared.Tpo" ".deps/chared.Po"; else rm -f ".deps/chared.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT common.o -MD -MP -MF ".deps/common.Tpo" -c -o common.o common.c; \
then mv -f ".deps/common.Tpo" ".deps/common.Po"; else rm -f ".deps/common.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT el.o -MD -MP -MF ".deps/el.Tpo" -c -o el.o el.c; \
then mv -f ".deps/el.Tpo" ".deps/el.Po"; else rm -f ".deps/el.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT emacs.o -MD -MP -MF ".deps/emacs.Tpo" -c -o emacs.o emacs.c; \
then mv -f ".deps/emacs.Tpo" ".deps/emacs.Po"; else rm -f ".deps/emacs.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT hist.o -MD -MP -MF ".deps/hist.Tpo" -c -o hist.o hist.c; \
then mv -f ".deps/hist.Tpo" ".deps/hist.Po"; else rm -f ".deps/hist.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT key.o -MD -MP -MF ".deps/key.Tpo" -c -o key.o key.c; \
then mv -f ".deps/key.Tpo" ".deps/key.Po"; else rm -f ".deps/key.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT map.o -MD -MP -MF ".deps/map.Tpo" -c -o map.o map.c; \
then mv -f ".deps/map.Tpo" ".deps/map.Po"; else rm -f ".deps/map.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT parse.o -MD -MP -MF ".deps/parse.Tpo" -c -o parse.o parse.c; \
then mv -f ".deps/parse.Tpo" ".deps/parse.Po"; else rm -f ".deps/parse.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT prompt.o -MD -MP -MF ".deps/prompt.Tpo" -c -o prompt.o prompt.c; \
then mv -f ".deps/prompt.Tpo" ".deps/prompt.Po"; else rm -f ".deps/prompt.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT read.o -MD -MP -MF ".deps/read.Tpo" -c -o read.o read.c; \
then mv -f ".deps/read.Tpo" ".deps/read.Po"; else rm -f ".deps/read.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT refresh.o -MD -MP -MF ".deps/refresh.Tpo" -c -o refresh.o refresh.c; \
then mv -f ".deps/refresh.Tpo" ".deps/refresh.Po"; else rm -f ".deps/refresh.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT search.o -MD -MP -MF ".deps/search.Tpo" -c -o search.o search.c; \
then mv -f ".deps/search.Tpo" ".deps/search.Po"; else rm -f ".deps/search.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT sig.o -MD -MP -MF ".deps/sig.Tpo" -c -o sig.o sig.c; \
then mv -f ".deps/sig.Tpo" ".deps/sig.Po"; else rm -f ".deps/sig.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT term.o -MD -MP -MF ".deps/term.Tpo" -c -o term.o term.c; \
then mv -f ".deps/term.Tpo" ".deps/term.Po"; else rm -f ".deps/term.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT tty.o -MD -MP -MF ".deps/tty.Tpo" -c -o tty.o tty.c; \
then mv -f ".deps/tty.Tpo" ".deps/tty.Po"; else rm -f ".deps/tty.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT vi.o -MD -MP -MF ".deps/vi.Tpo" -c -o vi.o vi.c; \
then mv -f ".deps/vi.Tpo" ".deps/vi.Po"; else rm -f ".deps/vi.Tpo"; exit 1; fi
vi.c: In function 'vi_histedit':
vi.c:1015: warning: ignoring return value of 'write', declared with attribute warn_unused_result
vi.c:1016: warning: ignoring return value of 'write', declared with attribute warn_unused_result
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT fgetln.o -MD -MP -MF ".deps/fgetln.Tpo" -c -o fgetln.o fgetln.c; \
then mv -f ".deps/fgetln.Tpo" ".deps/fgetln.Po"; else rm -f ".deps/fgetln.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT strlcat.o -MD -MP -MF ".deps/strlcat.Tpo" -c -o strlcat.o strlcat.c; \
then mv -f ".deps/strlcat.Tpo" ".deps/strlcat.Po"; else rm -f ".deps/strlcat.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT strlcpy.o -MD -MP -MF ".deps/strlcpy.Tpo" -c -o strlcpy.o strlcpy.c; \
then mv -f ".deps/strlcpy.Tpo" ".deps/strlcpy.Po"; else rm -f ".deps/strlcpy.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT unvis.o -MD -MP -MF ".deps/unvis.Tpo" -c -o unvis.o unvis.c; \
then mv -f ".deps/unvis.Tpo" ".deps/unvis.Po"; else rm -f ".deps/unvis.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT vis.o -MD -MP -MF ".deps/vis.Tpo" -c -o vis.o vis.c; \
then mv -f ".deps/vis.Tpo" ".deps/vis.Po"; else rm -f ".deps/vis.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT tokenizer.o -MD -MP -MF ".deps/tokenizer.Tpo" -c -o tokenizer.o tokenizer.c; \
then mv -f ".deps/tokenizer.Tpo" ".deps/tokenizer.Po"; else rm -f ".deps/tokenizer.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT history.o -MD -MP -MF ".deps/history.Tpo" -c -o history.o history.c; \
then mv -f ".deps/history.Tpo" ".deps/history.Po"; else rm -f ".deps/history.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT filecomplete.o -MD -MP -MF ".deps/filecomplete.Tpo" -c -o filecomplete.o filecomplete.c; \
then mv -f ".deps/filecomplete.Tpo" ".deps/filecomplete.Po"; else rm -f ".deps/filecomplete.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT readline.o -MD -MP -MF ".deps/readline.Tpo" -c -o readline.o readline.c; \
then mv -f ".deps/readline.Tpo" ".deps/readline.Po"; else rm -f ".deps/readline.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT fcns.o -MD -MP -MF ".deps/fcns.Tpo" -c -o fcns.o fcns.c; \
then mv -f ".deps/fcns.Tpo" ".deps/fcns.Po"; else rm -f ".deps/fcns.Tpo"; exit 1; fi
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -g -O2 -MT help.o -MD -MP -MF ".deps/help.Tpo" -c -o help.o help.c; \
then mv -f ".deps/help.Tpo" ".deps/help.Po"; else rm -f ".deps/help.Tpo"; exit 1; fi
rm -f libedit.a
ar cru libedit.a chared.o common.o el.o emacs.o hist.o key.o map.o parse.o prompt.o read.o refresh.o search.o sig.o term.o tty.o vi.o fgetln.o strlcat.o strlcpy.o unvis.o vis.o tokenizer.o history.o filecomplete.o readline.o fcns.o help.o
ranlib libedit.a
make[4]: Entering directory `/build/buildd/openipmi-2.0.13/libedit'
make[4]: Nothing to be done for `install-exec-am'.
make[4]: Nothing to be done for `install-data-am'.
make[4]: Leaving directory `/build/buildd/openipmi-2.0.13/libedit'
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/libedit'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/libedit'
Making install in cmdlang
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/cmdlang'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmdlang.lo -MD -MP -MF ".deps/cmdlang.Tpo" -c -o cmdlang.lo cmdlang.c; \
then mv -f ".deps/cmdlang.Tpo" ".deps/cmdlang.Plo"; else rm -f ".deps/cmdlang.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmdlang.lo -MD -MP -MF .deps/cmdlang.Tpo -c cmdlang.c -fPIC -DPIC -o .libs/cmdlang.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmdlang.lo -MD -MP -MF .deps/cmdlang.Tpo -c cmdlang.c -o cmdlang.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_domain.lo -MD -MP -MF ".deps/cmd_domain.Tpo" -c -o cmd_domain.lo cmd_domain.c; \
then mv -f ".deps/cmd_domain.Tpo" ".deps/cmd_domain.Plo"; else rm -f ".deps/cmd_domain.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_domain.lo -MD -MP -MF .deps/cmd_domain.Tpo -c cmd_domain.c -fPIC -DPIC -o .libs/cmd_domain.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_domain.lo -MD -MP -MF .deps/cmd_domain.Tpo -c cmd_domain.c -o cmd_domain.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_entity.lo -MD -MP -MF ".deps/cmd_entity.Tpo" -c -o cmd_entity.lo cmd_entity.c; \
then mv -f ".deps/cmd_entity.Tpo" ".deps/cmd_entity.Plo"; else rm -f ".deps/cmd_entity.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_entity.lo -MD -MP -MF .deps/cmd_entity.Tpo -c cmd_entity.c -fPIC -DPIC -o .libs/cmd_entity.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_entity.lo -MD -MP -MF .deps/cmd_entity.Tpo -c cmd_entity.c -o cmd_entity.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_mc.lo -MD -MP -MF ".deps/cmd_mc.Tpo" -c -o cmd_mc.lo cmd_mc.c; \
then mv -f ".deps/cmd_mc.Tpo" ".deps/cmd_mc.Plo"; else rm -f ".deps/cmd_mc.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_mc.lo -MD -MP -MF .deps/cmd_mc.Tpo -c cmd_mc.c -fPIC -DPIC -o .libs/cmd_mc.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_mc.lo -MD -MP -MF .deps/cmd_mc.Tpo -c cmd_mc.c -o cmd_mc.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pet.lo -MD -MP -MF ".deps/cmd_pet.Tpo" -c -o cmd_pet.lo cmd_pet.c; \
then mv -f ".deps/cmd_pet.Tpo" ".deps/cmd_pet.Plo"; else rm -f ".deps/cmd_pet.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pet.lo -MD -MP -MF .deps/cmd_pet.Tpo -c cmd_pet.c -fPIC -DPIC -o .libs/cmd_pet.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pet.lo -MD -MP -MF .deps/cmd_pet.Tpo -c cmd_pet.c -o cmd_pet.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sensor.lo -MD -MP -MF ".deps/cmd_sensor.Tpo" -c -o cmd_sensor.lo cmd_sensor.c; \
then mv -f ".deps/cmd_sensor.Tpo" ".deps/cmd_sensor.Plo"; else rm -f ".deps/cmd_sensor.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sensor.lo -MD -MP -MF .deps/cmd_sensor.Tpo -c cmd_sensor.c -fPIC -DPIC -o .libs/cmd_sensor.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sensor.lo -MD -MP -MF .deps/cmd_sensor.Tpo -c cmd_sensor.c -o cmd_sensor.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_control.lo -MD -MP -MF ".deps/cmd_control.Tpo" -c -o cmd_control.lo cmd_control.c; \
then mv -f ".deps/cmd_control.Tpo" ".deps/cmd_control.Plo"; else rm -f ".deps/cmd_control.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_control.lo -MD -MP -MF .deps/cmd_control.Tpo -c cmd_control.c -fPIC -DPIC -o .libs/cmd_control.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_control.lo -MD -MP -MF .deps/cmd_control.Tpo -c cmd_control.c -o cmd_control.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sel.lo -MD -MP -MF ".deps/cmd_sel.Tpo" -c -o cmd_sel.lo cmd_sel.c; \
then mv -f ".deps/cmd_sel.Tpo" ".deps/cmd_sel.Plo"; else rm -f ".deps/cmd_sel.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sel.lo -MD -MP -MF .deps/cmd_sel.Tpo -c cmd_sel.c -fPIC -DPIC -o .libs/cmd_sel.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_sel.lo -MD -MP -MF .deps/cmd_sel.Tpo -c cmd_sel.c -o cmd_sel.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_lanparm.lo -MD -MP -MF ".deps/cmd_lanparm.Tpo" -c -o cmd_lanparm.lo cmd_lanparm.c; \
then mv -f ".deps/cmd_lanparm.Tpo" ".deps/cmd_lanparm.Plo"; else rm -f ".deps/cmd_lanparm.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_lanparm.lo -MD -MP -MF .deps/cmd_lanparm.Tpo -c cmd_lanparm.c -fPIC -DPIC -o .libs/cmd_lanparm.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_lanparm.lo -MD -MP -MF .deps/cmd_lanparm.Tpo -c cmd_lanparm.c -o cmd_lanparm.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pef.lo -MD -MP -MF ".deps/cmd_pef.Tpo" -c -o cmd_pef.lo cmd_pef.c; \
then mv -f ".deps/cmd_pef.Tpo" ".deps/cmd_pef.Plo"; else rm -f ".deps/cmd_pef.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pef.lo -MD -MP -MF .deps/cmd_pef.Tpo -c cmd_pef.c -fPIC -DPIC -o .libs/cmd_pef.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_pef.lo -MD -MP -MF .deps/cmd_pef.Tpo -c cmd_pef.c -o cmd_pef.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_conn.lo -MD -MP -MF ".deps/cmd_conn.Tpo" -c -o cmd_conn.lo cmd_conn.c; \
then mv -f ".deps/cmd_conn.Tpo" ".deps/cmd_conn.Plo"; else rm -f ".deps/cmd_conn.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_conn.lo -MD -MP -MF .deps/cmd_conn.Tpo -c cmd_conn.c -fPIC -DPIC -o .libs/cmd_conn.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_conn.lo -MD -MP -MF .deps/cmd_conn.Tpo -c cmd_conn.c -o cmd_conn.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_fru.lo -MD -MP -MF ".deps/cmd_fru.Tpo" -c -o cmd_fru.lo cmd_fru.c; \
then mv -f ".deps/cmd_fru.Tpo" ".deps/cmd_fru.Plo"; else rm -f ".deps/cmd_fru.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_fru.lo -MD -MP -MF .deps/cmd_fru.Tpo -c cmd_fru.c -fPIC -DPIC -o .libs/cmd_fru.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_fru.lo -MD -MP -MF .deps/cmd_fru.Tpo -c cmd_fru.c -o cmd_fru.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT out_fru.lo -MD -MP -MF ".deps/out_fru.Tpo" -c -o out_fru.lo out_fru.c; \
then mv -f ".deps/out_fru.Tpo" ".deps/out_fru.Plo"; else rm -f ".deps/out_fru.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT out_fru.lo -MD -MP -MF .deps/out_fru.Tpo -c out_fru.c -fPIC -DPIC -o .libs/out_fru.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT out_fru.lo -MD -MP -MF .deps/out_fru.Tpo -c out_fru.c -o out_fru.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_solparm.lo -MD -MP -MF ".deps/cmd_solparm.Tpo" -c -o cmd_solparm.lo cmd_solparm.c; \
then mv -f ".deps/cmd_solparm.Tpo" ".deps/cmd_solparm.Plo"; else rm -f ".deps/cmd_solparm.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_solparm.lo -MD -MP -MF .deps/cmd_solparm.Tpo -c cmd_solparm.c -fPIC -DPIC -o .libs/cmd_solparm.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT cmd_solparm.lo -MD -MP -MF .deps/cmd_solparm.Tpo -c cmd_solparm.c -o cmd_solparm.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIcmdlang.la -rpath /usr/lib -rdynamic -version-info 0:5:0 -Wl,-Map -Wl,libOpenIPMIcmdlang.map cmdlang.lo cmd_domain.lo cmd_entity.lo cmd_mc.lo cmd_pet.lo cmd_sensor.lo cmd_control.lo cmd_sel.lo cmd_lanparm.lo cmd_pef.lo cmd_conn.lo cmd_fru.lo out_fru.lo cmd_solparm.lo -lm ../utils/libOpenIPMIutils.la ../lib/libOpenIPMI.la -lcurses
powerpc-linux-gnu-gcc -shared .libs/cmdlang.o .libs/cmd_domain.o .libs/cmd_entity.o .libs/cmd_mc.o .libs/cmd_pet.o .libs/cmd_sensor.o .libs/cmd_control.o .libs/cmd_sel.o .libs/cmd_lanparm.o .libs/cmd_pef.o .libs/cmd_conn.o .libs/cmd_fru.o .libs/out_fru.o .libs/cmd_solparm.o -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/utils/.libs -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/lib/.libs -lm ../utils/.libs/libOpenIPMIutils.so ../lib/.libs/libOpenIPMI.so -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIcmdlang.map -Wl,-soname -Wl,libOpenIPMIcmdlang.so.0 -o .libs/libOpenIPMIcmdlang.so.0.0.5
(cd .libs && rm -f libOpenIPMIcmdlang.so.0 && ln -s libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so.0)
(cd .libs && rm -f libOpenIPMIcmdlang.so && ln -s libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so)
ar cru .libs/libOpenIPMIcmdlang.a cmdlang.o cmd_domain.o cmd_entity.o cmd_mc.o cmd_pet.o cmd_sensor.o cmd_control.o cmd_sel.o cmd_lanparm.o cmd_pef.o cmd_conn.o cmd_fru.o out_fru.o cmd_solparm.o
ranlib .libs/libOpenIPMIcmdlang.a
creating libOpenIPMIcmdlang.la
(cd .libs && rm -f libOpenIPMIcmdlang.la && ln -s ../libOpenIPMIcmdlang.la libOpenIPMIcmdlang.la)
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ipmish.o -MD -MP -MF ".deps/ipmish.Tpo" -c -o ipmish.o ipmish.c; \
then mv -f ".deps/ipmish.Tpo" ".deps/ipmish.Po"; else rm -f ".deps/ipmish.Tpo"; exit 1; fi
ipmish.c: In function 'out_help':
ipmish.c:408: warning: ignoring return value of 'fwrite', declared with attribute warn_unused_result
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT os_debug.o -MD -MP -MF ".deps/os_debug.Tpo" -c -o os_debug.o os_debug.c; \
then mv -f ".deps/os_debug.Tpo" ".deps/os_debug.Po"; else rm -f ".deps/os_debug.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o openipmish ipmish.o os_debug.o libOpenIPMIcmdlang.la ../utils/libOpenIPMIutils.la ../lib/libOpenIPMI.la ../unix/libOpenIPMIposix.la ../libedit/libedit.a -lnetsnmp -lcurses
powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o .libs/openipmish ipmish.o os_debug.o ./.libs/libOpenIPMIcmdlang.so ../utils/.libs/libOpenIPMIutils.so ../lib/.libs/libOpenIPMI.so ../unix/.libs/libOpenIPMIposix.so ../libedit/libedit.a /usr/lib/libnetsnmp.so -lcurses
creating openipmish
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/cmdlang'
test -z "/usr/lib" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMIcmdlang.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.la'
libtool: install: warning: relinking `libOpenIPMIcmdlang.la'
(cd /build/buildd/openipmi-2.0.13/cmdlang; /bin/bash ../libtool --tag=CC --mode=relink powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -I../libedit -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIcmdlang.la -rpath /usr/lib -rdynamic -version-info 0:5:0 -Wl,-Map -Wl,libOpenIPMIcmdlang.map cmdlang.lo cmd_domain.lo cmd_entity.lo cmd_mc.lo cmd_pet.lo cmd_sensor.lo cmd_control.lo cmd_sel.lo cmd_lanparm.lo cmd_pef.lo cmd_conn.lo cmd_fru.lo out_fru.lo cmd_solparm.lo -lm ../utils/libOpenIPMIutils.la ../lib/libOpenIPMI.la -lcurses -inst-prefix-dir /build/buildd/openipmi-2.0.13/debian/tmp)
powerpc-linux-gnu-gcc -shared .libs/cmdlang.o .libs/cmd_domain.o .libs/cmd_entity.o .libs/cmd_mc.o .libs/cmd_pet.o .libs/cmd_sensor.o .libs/cmd_control.o .libs/cmd_sel.o .libs/cmd_lanparm.o .libs/cmd_pef.o .libs/cmd_conn.o .libs/cmd_fru.o .libs/out_fru.o .libs/cmd_solparm.o -lm -L/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib -L/usr/lib -lOpenIPMIutils -lOpenIPMI -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIcmdlang.map -Wl,-soname -Wl,libOpenIPMIcmdlang.so.0 -o .libs/libOpenIPMIcmdlang.so.0.0.5
/usr/bin/install -c .libs/libOpenIPMIcmdlang.so.0.0.5T /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.so.0.0.5
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so.0 || { rm -f libOpenIPMIcmdlang.so.0 && ln -s libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so.0; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so || { rm -f libOpenIPMIcmdlang.so && ln -s libOpenIPMIcmdlang.so.0.0.5 libOpenIPMIcmdlang.so; }; })
/usr/bin/install -c .libs/libOpenIPMIcmdlang.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.la
/usr/bin/install -c .libs/libOpenIPMIcmdlang.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIcmdlang.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
test -z "/usr/bin" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/bin"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'openipmish' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/openipmish'
libtool: install: warning: `libOpenIPMIcmdlang.la' has not been installed in `/usr/lib'
libtool: install: warning: `../utils/libOpenIPMIutils.la' has not been installed in `/usr/lib'
libtool: install: warning: `../lib/libOpenIPMI.la' has not been installed in `/usr/lib'
libtool: install: warning: `../unix/libOpenIPMIposix.la' has not been installed in `/usr/lib'
/usr/bin/install -c .libs/openipmish /build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/openipmish
rm -f /build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/ipmish
ln -s openipmish /build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/ipmish
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/cmdlang'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/cmdlang'
Making install in ui
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/ui'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui.lo -MD -MP -MF ".deps/ui.Tpo" -c -o ui.lo ui.c; \
then mv -f ".deps/ui.Tpo" ".deps/ui.Plo"; else rm -f ".deps/ui.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui.lo -MD -MP -MF .deps/ui.Tpo -c ui.c -fPIC -DPIC -o .libs/ui.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui.lo -MD -MP -MF .deps/ui.Tpo -c ui.c -o ui.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_os.lo -MD -MP -MF ".deps/ui_os.Tpo" -c -o ui_os.lo ui_os.c; \
then mv -f ".deps/ui_os.Tpo" ".deps/ui_os.Plo"; else rm -f ".deps/ui_os.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_os.lo -MD -MP -MF .deps/ui_os.Tpo -c ui_os.c -fPIC -DPIC -o .libs/ui_os.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_os.lo -MD -MP -MF .deps/ui_os.Tpo -c ui_os.c -o ui_os.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_keypad.lo -MD -MP -MF ".deps/ui_keypad.Tpo" -c -o ui_keypad.lo ui_keypad.c; \
then mv -f ".deps/ui_keypad.Tpo" ".deps/ui_keypad.Plo"; else rm -f ".deps/ui_keypad.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_keypad.lo -MD -MP -MF .deps/ui_keypad.Tpo -c ui_keypad.c -fPIC -DPIC -o .libs/ui_keypad.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_keypad.lo -MD -MP -MF .deps/ui_keypad.Tpo -c ui_keypad.c -o ui_keypad.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_command.lo -MD -MP -MF ".deps/ui_command.Tpo" -c -o ui_command.lo ui_command.c; \
then mv -f ".deps/ui_command.Tpo" ".deps/ui_command.Plo"; else rm -f ".deps/ui_command.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_command.lo -MD -MP -MF .deps/ui_command.Tpo -c ui_command.c -fPIC -DPIC -o .libs/ui_command.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT ui_command.lo -MD -MP -MF .deps/ui_command.Tpo -c ui_command.c -o ui_command.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libOpenIPMIui.la -rpath /usr/lib -version-info 1:1:0 -Wl,-Map -Wl,libOpenIPMIui.map ui.lo ui_os.lo ui_keypad.lo ui_command.lo -lcurses
powerpc-linux-gnu-gcc -shared .libs/ui.o .libs/ui_os.o .libs/ui_keypad.o .libs/ui_command.o -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libOpenIPMIui.map -Wl,-soname -Wl,libOpenIPMIui.so.1 -o .libs/libOpenIPMIui.so.1.0.1
(cd .libs && rm -f libOpenIPMIui.so.1 && ln -s libOpenIPMIui.so.1.0.1 libOpenIPMIui.so.1)
(cd .libs && rm -f libOpenIPMIui.so && ln -s libOpenIPMIui.so.1.0.1 libOpenIPMIui.so)
ar cru .libs/libOpenIPMIui.a ui.o ui_os.o ui_keypad.o ui_command.o
ranlib .libs/libOpenIPMIui.a
creating libOpenIPMIui.la
(cd .libs && rm -f libOpenIPMIui.la && ln -s ../libOpenIPMIui.la libOpenIPMIui.la)
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT basic_ui.o -MD -MP -MF ".deps/basic_ui.Tpo" -c -o basic_ui.o basic_ui.c; \
then mv -f ".deps/basic_ui.Tpo" ".deps/basic_ui.Po"; else rm -f ".deps/basic_ui.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o ipmi_ui basic_ui.o libOpenIPMIui.la ../utils/libOpenIPMIutils.la ../lib/libOpenIPMI.la ../unix/libOpenIPMIposix.la -lncurses -lnetsnmp -lcurses
powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o .libs/ipmi_ui basic_ui.o ./.libs/libOpenIPMIui.so ../utils/.libs/libOpenIPMIutils.so ../lib/.libs/libOpenIPMI.so ../unix/.libs/libOpenIPMIposix.so -lncurses /usr/lib/libnetsnmp.so -lcurses
creating ipmi_ui
make[3]: Entering directory `/build/buildd/openipmi-2.0.13/ui'
test -z "/usr/lib" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'libOpenIPMIui.la' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.la'
/usr/bin/install -c .libs/libOpenIPMIui.so.1.0.1 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.so.1.0.1
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIui.so.1.0.1 libOpenIPMIui.so.1 || { rm -f libOpenIPMIui.so.1 && ln -s libOpenIPMIui.so.1.0.1 libOpenIPMIui.so.1; }; })
(cd /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib && { ln -s -f libOpenIPMIui.so.1.0.1 libOpenIPMIui.so || { rm -f libOpenIPMIui.so && ln -s libOpenIPMIui.so.1.0.1 libOpenIPMIui.so; }; })
/usr/bin/install -c .libs/libOpenIPMIui.lai /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.la
/usr/bin/install -c .libs/libOpenIPMIui.a /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.a
chmod 644 /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.a
ranlib /build/buildd/openipmi-2.0.13/debian/tmp/usr/lib/libOpenIPMIui.a
libtool: install: warning: remember to run `libtool --finish /usr/lib'
test -z "/usr/bin" || mkdir -p -- "/build/buildd/openipmi-2.0.13/debian/tmp/usr/bin"
/bin/bash ../libtool --mode=install /usr/bin/install -c 'ipmi_ui' '/build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/ipmi_ui'
libtool: install: warning: `libOpenIPMIui.la' has not been installed in `/usr/lib'
libtool: install: warning: `../utils/libOpenIPMIutils.la' has not been installed in `/usr/lib'
libtool: install: warning: `../lib/libOpenIPMI.la' has not been installed in `/usr/lib'
libtool: install: warning: `../unix/libOpenIPMIposix.la' has not been installed in `/usr/lib'
/usr/bin/install -c .libs/ipmi_ui /build/buildd/openipmi-2.0.13/debian/tmp/usr/bin/ipmi_ui
make[3]: Nothing to be done for `install-data-am'.
make[3]: Leaving directory `/build/buildd/openipmi-2.0.13/ui'
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/ui'
Making install in lanserv
make[2]: Entering directory `/build/buildd/openipmi-2.0.13/lanserv'
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_ipmi.lo -MD -MP -MF ".deps/lanserv_ipmi.Tpo" -c -o lanserv_ipmi.lo lanserv_ipmi.c; \
then mv -f ".deps/lanserv_ipmi.Tpo" ".deps/lanserv_ipmi.Plo"; else rm -f ".deps/lanserv_ipmi.Tpo"; exit 1; fi
mkdir .libs
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_ipmi.lo -MD -MP -MF .deps/lanserv_ipmi.Tpo -c lanserv_ipmi.c -fPIC -DPIC -o .libs/lanserv_ipmi.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_ipmi.lo -MD -MP -MF .deps/lanserv_ipmi.Tpo -c lanserv_ipmi.c -o lanserv_ipmi.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_asf.lo -MD -MP -MF ".deps/lanserv_asf.Tpo" -c -o lanserv_asf.lo lanserv_asf.c; \
then mv -f ".deps/lanserv_asf.Tpo" ".deps/lanserv_asf.Plo"; else rm -f ".deps/lanserv_asf.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_asf.lo -MD -MP -MF .deps/lanserv_asf.Tpo -c lanserv_asf.c -fPIC -DPIC -o .libs/lanserv_asf.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_asf.lo -MD -MP -MF .deps/lanserv_asf.Tpo -c lanserv_asf.c -o lanserv_asf.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT priv_table.lo -MD -MP -MF ".deps/priv_table.Tpo" -c -o priv_table.lo priv_table.c; \
then mv -f ".deps/priv_table.Tpo" ".deps/priv_table.Plo"; else rm -f ".deps/priv_table.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT priv_table.lo -MD -MP -MF .deps/priv_table.Tpo -c priv_table.c -fPIC -DPIC -o .libs/priv_table.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT priv_table.lo -MD -MP -MF .deps/priv_table.Tpo -c priv_table.c -o priv_table.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_oem_force.lo -MD -MP -MF ".deps/lanserv_oem_force.Tpo" -c -o lanserv_oem_force.lo lanserv_oem_force.c; \
then mv -f ".deps/lanserv_oem_force.Tpo" ".deps/lanserv_oem_force.Plo"; else rm -f ".deps/lanserv_oem_force.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_oem_force.lo -MD -MP -MF .deps/lanserv_oem_force.Tpo -c lanserv_oem_force.c -fPIC -DPIC -o .libs/lanserv_oem_force.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_oem_force.lo -MD -MP -MF .deps/lanserv_oem_force.Tpo -c lanserv_oem_force.c -o lanserv_oem_force.o >/dev/null 2>&1
if /bin/bash ../libtool --tag=CC --mode=compile powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_config.lo -MD -MP -MF ".deps/lanserv_config.Tpo" -c -o lanserv_config.lo lanserv_config.c; \
then mv -f ".deps/lanserv_config.Tpo" ".deps/lanserv_config.Plo"; else rm -f ".deps/lanserv_config.Tpo"; exit 1; fi
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_config.lo -MD -MP -MF .deps/lanserv_config.Tpo -c lanserv_config.c -fPIC -DPIC -o .libs/lanserv_config.o
powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv_config.lo -MD -MP -MF .deps/lanserv_config.Tpo -c lanserv_config.c -o lanserv_config.o >/dev/null 2>&1
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o libIPMIlanserv.la -rpath /usr/lib -version-info 0:1:0 -Wl,-Map -Wl,libIPMIlanserv.map lanserv_ipmi.lo lanserv_asf.lo priv_table.lo lanserv_oem_force.lo lanserv_config.lo ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -shared .libs/lanserv_ipmi.o .libs/lanserv_asf.o .libs/priv_table.o .libs/lanserv_oem_force.o .libs/lanserv_config.o -Wl,--rpath -Wl,/build/buildd/openipmi-2.0.13/utils/.libs ../utils/.libs/libOpenIPMIutils.so -lcurses -Wl,-Bsymbolic-functions -Wl,-Map -Wl,libIPMIlanserv.map -Wl,-soname -Wl,libIPMIlanserv.so.0 -o .libs/libIPMIlanserv.so.0.0.1
(cd .libs && rm -f libIPMIlanserv.so.0 && ln -s libIPMIlanserv.so.0.0.1 libIPMIlanserv.so.0)
(cd .libs && rm -f libIPMIlanserv.so && ln -s libIPMIlanserv.so.0.0.1 libIPMIlanserv.so)
ar cru .libs/libIPMIlanserv.a lanserv_ipmi.o lanserv_asf.o priv_table.o lanserv_oem_force.o lanserv_config.o
ranlib .libs/libIPMIlanserv.a
creating libIPMIlanserv.la
(cd .libs && rm -f libIPMIlanserv.la && ln -s ../libIPMIlanserv.la libIPMIlanserv.la)
if powerpc-linux-gnu-gcc -DHAVE_CONFIG_H -I. -I. -I.. -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -MT lanserv.o -MD -MP -MF ".deps/lanserv.Tpo" -c -o lanserv.o lanserv.c; \
then mv -f ".deps/lanserv.Tpo" ".deps/lanserv.Po"; else rm -f ".deps/lanserv.Tpo"; exit 1; fi
/bin/bash ../libtool --tag=CC --mode=link powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o ipmilan -rdynamic lanserv.o libIPMIlanserv.la ../utils/libOpenIPMIutils.la -lcurses
powerpc-linux-gnu-gcc -Wall -Wsign-compare -I../include -DIPMI_CHECK_LOCKS -Wall -g -O2 -Wl,-Bsymbolic-functions -o .libs/ipmilan -rdynamic lanserv.o ./.libs/libIPMIlanserv.so ../utils/.libs/libOpenIPMIutils.so -lcurses
lanserv.o: In function `main':
/build/buildd/openipmi-2.0.13/lanserv/lanserv.c:591: undefined reference to `poptGetContext'
/build/buildd/openipmi-2.0.13/lanserv/lanserv.c:592: undefined reference to `poptGetNextOpt'
/build/buildd/openipmi-2.0.13/lanserv/lanserv.c:592: undefined reference to `poptGetNextOpt'
lanserv.o:(.data+0x80): undefined reference to `poptHelpOptions'
collect2: ld returned 1 exit status
make[2]: *** [ipmilan] Error 1
make[2]: Leaving directory `/build/buildd/openipmi-2.0.13/lanserv'
make[1]: *** [install-recursive] Error 1
make[1]: Leaving directory `/build/buildd/openipmi-2.0.13'
make: *** [install-arch] Error 2
dpkg-buildpackage: failure: /usr/bin/fakeroot debian/rules binary-arch gave error exit status 2
******************************************************************************
Build finished at 20080706-1742
FAILED [dpkg-buildpackage died]
Purging chroot-intrepid-autotest/build/buildd/openipmi-2.0.13
------------------------------------------------------------------------------
/usr/bin/sudo dpkg --root=/srv/royal.buildd/home/buildd/build-intrepid-autotest/chroot-intrepid-autotest --purge intltool-debian groff-base libwrap0 gettext file zlib1g-dev libsnmp-perl libwrap0-dev html2text gettext-base debhelper libsnmp-dev po-debconf libncurses5-dev libmagic1 libpopt-dev libsysfs2 libsensors3 libpopt0 libssl-dev libsnmp15 libperl5.10 bsdmainutils libsensors-dev procps man-db libssl0.9.8 libsnmp-base
(Reading database ... 14669 files and directories currently installed.)
Removing debhelper ...
Removing libsnmp-dev ...
Purging configuration files for libsnmp-dev ...
Removing po-debconf ...
Removing libncurses5-dev ...
Removing libpopt-dev ...
Removing libpopt0 ...
Purging configuration files for libpopt0 ...
Removing libssl-dev ...
Removing libsensors-dev ...
Removing procps ...
Purging configuration files for procps ...
Removing man-db ...
Purging configuration files for man-db ...
Removing catpages as well as /var/cache/man hierarchy.
Removing intltool-debian ...
Removing groff-base ...
Purging configuration files for groff-base ...
Removing gettext ...
Removing file ...
Purging configuration files for file ...
Removing zlib1g-dev ...
Removing libsnmp-perl ...
Removing libwrap0-dev ...
Removing html2text ...
Purging configuration files for html2text ...
Removing gettext-base ...
Removing libmagic1 ...
Purging configuration files for libmagic1 ...
Removing libsnmp15 ...
Purging configuration files for libsnmp15 ...
Removing libperl5.10 ...
Removing bsdmainutils ...
Purging configuration files for bsdmainutils ...
Removing libssl0.9.8 ...
Purging configuration files for libssl0.9.8 ...
Removing libsnmp-base ...
Purging configuration files for libsnmp-base ...
Removing libwrap0 ...
Purging configuration files for libwrap0 ...
Removing libsensors3 ...
Purging configuration files for libsensors3 ...
Removing libsysfs2 ...
Purging configuration files for libsysfs2 ...
******************************************************************************
Finished at 20080706-1742
Build needed 00:03:21, 47880k disk space
More information about the ubuntu-autotest
mailing list