New Motherboard Problems.

[Paul Schulz]

Hi Dale,

Thanks for providing the instructions but they arn't going to work..
as they assume that a network already exists.

- Do you have the list of required packages for Michael?
- 'tar xzvf' should work on the .tar.gz file.

Do you know why the driver for this ethernet controller isn't included
in the standard Linux kernel?

Cheers,
Paul

On Mon, Oct 12, 2009 at 6:22 AM, Dale <quail.linux at gmail.com> wrote:
> 2009/10/12 Michael Harold <mike.harold at optusnet.com>:
>> Hi Paul,
>>
>> Thanks for the input, much appreciated.
>>
>> I have noted that BIOS attempts to load the OS from the hard drive first
>> but can not find an anonymous file it is looking for, so goes the CD.
>>
>> 'Embeded' LAN does not appear in any of the setup pages, although the
>> cable test is good.
>>
>> lspci > lspci-data.txt interestingly produced what looked like the man
>> page for the command first time up. Playing around lost that and
>> re-starting the terminal and that command did not repeat it.
>>
>> However, lspci by itself produced the output below (transfer via USB
>> stick). Ethernet Controller in the last line but one maybe what you are
>> looking for and can suggest a method of making it operational.
>>
>> Cheers
>> MikeH
>>
>> 00:00.0 Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM
>> Controller (rev 10)
>> 00:02.0 VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller (rev 10)
>> 00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 01)
>> 00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 01)
>> 00:1c.1 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 2 (rev 01)
>> 00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 01)
>> 00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 01)
>> 00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 01)
>> 00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 01)
>> 00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 01)
>> 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev e1)
>> 00:1f.0 ISA bridge: Intel Corporation 82801GB/GR (ICH7 Family) LPC Interface Bridge (rev 01)
>> 00:1f.1 IDE interface: Intel Corporation 82801G (ICH7 Family) IDE Controller (rev 01)
>> 00:1f.2 IDE interface: Intel Corporation 82801GB/GR/GH (ICH7 Family) SATA IDE Controller (rev 01)
>> 00:1f.3 SMBus: Intel Corporation 82801G (ICH7 Family) SMBus Controller (rev 01)
>> 02:00.0 Ethernet controller: Attansic Technology Corp. Device 1063 (rev c0)
>> 03:00.0 Mass storage controller: Silicon Image, Inc. PCI0680 Ultra ATA-133 Host Controller (rev 02)
>>
>>
>
> Hi Michael,
>
> I have the same Ethernet controller in my laptop and this is what I
> had to do to get it working[1]
>
> Good Luck
>
> Regards
> Dale
>
> [1] http://quail.southernvaleslug.org/webblog/archives/105
> --
> [WWW] http://quail.southernvaleslug.org/
> "The significant problems we face cannot be solved at the same level
> of thinking we were at when we created them" - Albert Einstein
>
> --
> ubuntu-au mailing list
> ubuntu-au at lists.ubuntu.com
> https://lists.ubuntu.com/mailman/listinfo/ubuntu-au
>