[Bug 2009847] Re: lunar/linux-raspi: 6.2.0-1003.3 -proposed tracker
Launchpad Bug Tracker
2009847 at bugs.launchpad.net
Tue Mar 28 14:43:25 UTC 2023
This bug was fixed in the package linux-raspi - 6.2.0-1003.3
---------------
linux-raspi (6.2.0-1003.3) lunar; urgency=medium
* lunar/linux-raspi: 6.2.0-1003.3 -proposed tracker (LP: #2009847)
* Packaging resync (LP: #1786013)
- [Packaging] update update.conf
* Miscellaneous upstream changes
- media: bcm2835-v4l2-codec: Add profile & level ctrls to decode
- drm/vc4_plane: Add support for YUV444 formats
- drm/vc4: Calculate bpc based on max_requested_bpc
- media: dt-bindings: ak7375: Convert to DT schema
- media: dt-bindings: ak7375: Add supplies
- media: i2c: ak7375: Add regulator management
- configs: Add CONFIG_VIDEO_AK7375=m
- dtoverlays: Add VCM option to imx519
- dtoverlays: Add IMX519 support to camera mux overlays
- vc04_services: bcm2835_codec: Ignore READ_ONLY ctrls in s_ctrl
- ASoC: bcm: Fix Rpi-PROTO and audioinjector.net Pi
- dtoverlays: Add VCM option to Arducam64MP
- dtoverlays: Add Arducam64MP support to camera mux overlays
[ Ubuntu: 6.2.0-13.13 ]
* lunar/linux: 6.2.0-13.13 -proposed tracker (LP: #2009704)
* Packaging resync (LP: #1786013)
- debian/dkms-versions -- update from kernel-versions (main/master)
* mt7921: add support of MTFG table (LP: #2009642)
- wifi: mt76: mt7921: add support to update fw capability with MTFG table
[ Ubuntu: 6.2.0-12.12 ]
* lunar/linux: 6.2.0-12.12 -proposed tracker (LP: #2009698)
* Miscellaneous Ubuntu changes
- SAUCE: enforce rust availability only on x86_64
- [Config] update CONFIG_RUST_IS_AVAILABLE
[ Ubuntu: 6.2.0-11.11 ]
* lunar/linux: 6.2.0-11.11 -proposed tracker (LP: #2009697)
* Miscellaneous Ubuntu changes
- [Packaging] do not stop the build if rust is not available
linux-raspi (6.2.0-1002.2) lunar; urgency=medium
* Miscellaneous Ubuntu changes
- [Packaging] raspi: Drop etc/kernelconfig
- [Config] raspi: Update CC_VERSION_TEXT
- [Config] raspi: Change non-essential options from 'y' to 'm'
- [Config] raspi: Change unsupported options from 'y' to 'n'
- [Config] raspi: Change undesired options from 'y' to 'n'
[ Ubuntu: 6.2.0-10.10 ]
* lunar/linux-unstable: 6.2.0-10.10 -proposed tracker (LP: #2007818)
* Built-in camera device dies after runtime suspended (LP: #2007530)
- SAUCE: usb: xhci: Workaround for runpm issue on AMD xHC
* Miscellaneous Ubuntu changes
- [Config] update annotations after rebase to v6.2
* Rebase to v6.2
linux-raspi (6.2.0-1001.1) lunar; urgency=medium
* IO errors when writing large amounts of data to USB storage in eoan on
RPI2/3 (armhf kernel) (LP: #1852510)
- Add dwc_otg driver
* Miscellaneous Ubuntu changes
- [Config] raspi: updateconfigs after import of rpi-6.2.y patchset
* Miscellaneous upstream changes
- raspberrypi-firmware: Update mailbox commands
- media: uapi: Add some RGB bus formats for VC4 DPI output
- Support RPi DPI interface in mode6 for 18-bit color
- drm/vc4: Add FKMS as an acceptable node for dma ranges.
- drm/vc4: Add the 2711 HVS as a suitable DMA node
- drm/vc4: Change the default DPI format to being 18bpp, not 24.
- drm/atomic: Don't fixup modes that haven't been reset
- drm/vc4: Fix timings for VEC modes
- drm/vc4: Fix definition of PAL-M mode
- drm/vc4: Add support for more analog TV standards
- drm/vc4: Allow setting the TV norm via module parameter
- drm/vc4: Refactor mode checking logic
- drm/vc4: Add firmware-kms mode
- drm/vc4: Add support for gamma on BCM2711
- drm/vc4: Add debugfs node that dumps the vc5 gamma PWL entries
- drm/vc4: hvs: Force modeset on gamma lut change
- drm/vc4: Relax VEC modeline requirements and add progressive mode support
- drm/vc4: Make VEC progressive modes readily accessible
- drm: Check whether the gamma lut has changed before updating
- drm/vc4: Enable gamma block only when required.
- drm/vc4: Only add gamma properties once.
- drm/vc4: Validate the size of the gamma_lut
- drm/vc4: Disable Gamma control on HVS5 due to issues writing the table
- drm/vc4_hdmi: Add Broadcast RGB property to allow override of RGB range
- drm/vc4: Add DRM 210101010 RGB formats for hvs5.
- drm/vc4: dpi: Support DPI interface in mode3 for RGB565
- drm/panel: Add and initialise an orientation field to drm_panel
- drm/vc4: For DPI, MEDIA_BUS_FMT_RGB565_1X16 is mode 1, not 3.
- drm/dsi: Document the meaning and spec references for MIPI_DSI_MODE_*
- drm/bridge: tc358762: Ignore EPROBE_DEFER when logging errors
- drm/vc4: Rename bridge to out_bridge
- drm/vc4: Move DSI initialisation to encoder_mode_set.
- drm/vc4: Remove splitting the bridge chain from the driver.
- drm/vc4: Convert vc4_dsi to use atomic enable/disable/mode_set.
- drm/vc4: Convert vc4_dsi to using a bridge instead of encoder.
- drm/vc4: Remove entry to ULPS from vc4_dsi post_disable
- drm/bridge: Introduce pre_enable_upstream_first to alter bridge init order
- drm/panel: Add prepare_upstream_first flag to drm_panel
- drm/tc358762: Set the pre_enable_upstream_first flag to configure DSI host
- drm/vc4: Support zpos on all planes
- drm/vc4: hdmi: Add CSC for BT601/709/2020 limited and full range output
- vc4/drm: vc4_plane: Keep fractional source coords inside state
- vc4/drm: Handle fractional coordinates using the phase field
- drm: Add chroma siting properties
- vc4/drm:plane: Make use of chroma siting parameter
- drm/vc4: Force trigger of dlist update on margins change
- drm/atomic-helpers: remove legacy_cursor_update hacks
- drm/vc4_hdmi: Force a modeset when Broadcast RGB setting changes
- drm/atomic: If margins are updated, update all planes.
- drm/vc4: hvs: Ignore atomic_flush if we're disabled
- drm: vc4: Fix colour order for xRGB1555 on HVS5
- drm: vc4: 0 is a valid value for pixel_order_hvs5, so fix conditionals
- drm: vc4: Omit pixel_order from the hvs_format for hvs5 only formats
- drm: vc4: Add 3:3:2 and 4:4:4:4 RGB/RGBX/RGBA formats
- drm: vc4: Add comments for which HVS_PIXEL_ORDER_xxx defines apply
- drm/vc4: Correct interlaced timings again
- drm/vc4: Add async update support for cursor planes
- drm/vc4: Configure the HVS COB allocations
- drm/vc4: Set AXI panic modes for the HVS
- drm/vc4: SCALER_DISPBKGND_AUTOHS is only valid on HVS4
- drm/vc4: Correct interrupt masking bit assignment for HVS5
- drm/vc4: hvs: Skip DebugFS Registration for FKMS
- drivers/gpu/drm/vc4: Add missing 32-bit RGB formats
- drm/vc4_hdmi: Allow hotplug detect to be forced
- vc4_hdmi: Avoid log spam for audio start failure
- drm/atomic: Constify the old/new state accessors
- drm/vc4: Constify container_of wrappers
- drm/vc4: kms: Constify the HVS old/new state helpers
- drm/vc4: kms: Sort the CRTCs by output before assigning them
- drm/vc4: txp: Reorder the variable assignments
- drm/vc4: Add TXP encoder type
- drm/vc4: txp: Initialise the CRTC before the encoder and connector
- drm/vc4: crtc: Pass the device and data in vc4_crtc_init
- drm/vc4: crtc: Provide a CRTC name
- drm/tests: helpers: Add missing export
- drm/tests: helpers: Move the helper header to include/drm
- drm/tests: Introduce a config option for the KUnit helpers
- drm/tests: helpers: Document drm_kunit_device_init()
- drm/tests: helpers: Switch to EXPORT_SYMBOL_GPL
- drm/tests: helpers: Rename the device init helper
- drm/tests: helpers: Remove the name parameter
- drm/tests: helpers: Create the device in another function
- drm/tests: helpers: Switch to a platform_device
- drm/tests: helpers: Make sure the device is bound
- drm/tests: helpers: Allow for a custom device struct to be allocated
- drm/tests: helpers: Allow to pass a custom drm_driver
- drm/vc4: Move HVS state to main header
- drm/vc4: crtc: Introduce a lower-level crtc init helper
- drm/vc4: crtc: Make encoder lookup helper public
- drm/vc4: hvs: Provide a function to initialize the HVS structure
- drm/vc4: tests: Introduce a mocking infrastructure
- drm/vc4: tests: Fail the current test if we access a register
- drm/vc4: tests: Add unit test suite for the PV muxing
- vc4_crtc: Increase setup cost in core clock calculation to handle extreme
reduced blanking
- clk: bcm: rpi: Create helper to retrieve private data
- arm64: setup: Fix build warning
- BCM2708: Add core Device Tree support
- config: Add default configs
- clk-raspberrypi: Add ISP to exported clocks
- Register the clocks early during the boot process, so that special/critical
clocks can get enabled early on in the boot process avoiding the risk of
disabling a clock, pll_divider or pll when a claiming driver fails to
install propperly - maybe it needs to defer.
- clk-bcm2835: Mark used PLLs and dividers CRITICAL
- clk-bcm2835: Add claim-clocks property
- clk-bcm2835: Read max core clock from firmware
- clk: clk-bcm2835: Use %zd when printing size_t
- clk-bcm2835: Don't wait for pllh lock
- clk: bcm2835: Add support for setting leaf clock rates while running.
- clk: bcm2835: Allow reparenting leaf clocks while they're running.
- clk-bcm2835: Avoid null pointer exception
- clk-bcm2835: Disable v3d clock
- clk: bcm2835: Pass DT node to rpi_firmware_get
- clk-bcm2835: Remove VEC clock support
- arm: partially revert 702b94bff3c50542a6e4ab9a4f4cef093262fe65
- cache: export clean and invalidate
- Revert "spi: spidev: Fix CS polarity if GPIO descriptors are used"
- Revert "Bluetooth: Always request for user confirmation for Just Works (LE
SC)"
- Revert "Bluetooth: Always request for user confirmation for Just Works"
- Revert "net: bcmgenet: Request APD, DLL disable and IDDQ-SR"
- smsx95xx: fix crimes against truesize
- smsc95xx: Experimental: Enable turbo_mode and packetsize=2560 by default
- Allow mac address to be set in smsc95xx
- cgroup: Disable cgroup "memory" by default
- Protect __release_resource against resources without parents
- irq-bcm2836: Avoid "Invalid trigger warning"
- irqchip: bcm2835: Add FIQ support
- irqchip: irq-bcm2835: Add 2836 FIQ support
- spi: spidev: Completely disable the spidev warning
- dmaengine: bcm2835: Load driver early and support legacy API
- rtc: Add SPI alias for pcf2123 driver
- watchdog: bcm2835: Support setting reboot partition
- reboot: Use power off rather than busy spinning when halt is requested
- bcm: Make RASPBERRYPI_POWER depend on PM
- bcm2835-rng: Avoid initialising if already enabled
- sound: Demote deferral errors to INFO level
- Update vfpmodule.c
- i2c: bcm2835: Add debug support
- irqchip: irq-bcm2836: Remove regmap and syscon use
- lan78xx: Enable LEDs and auto-negotiation
- amba_pl011: Don't use DT aliases for numbering
- amba_pl011: Round input clock up
- amba_pl011: Insert mb() for correct FIFO handling
- amba_pl011: Add cts-event-workaround DT property
- tty: amba-pl011: Avoid rare write-when-full error
- pinctrl-bcm2835: Set base to 0 give expected gpio numbering
- Main bcm2708/bcm2709 linux port
- bcm2708 framebuffer driver
- Pulled in the multi frame buffer support from the Pi3 repo
- fbdev: add FBIOCOPYAREA ioctl
- dmaengine: Add support for BCM2708
- MMC: added alternative MMC driver
- Adding bcm2835-sdhost driver, and an overlay to enable it
- vc_mem: Add vc_mem driver for querying firmware memory addresses
- Add /dev/gpiomem device for rootless user GPIO access
- Add SMI driver
- Add Chris Boot's i2c driver
- char: broadcom: Add vcio module
- firmware: bcm2835: Support ARCH_BCM270x
- leds: Add the "input" trigger, for pwr_led
- Added Device IDs for August DVB-T 205
- Improve __copy_to_user and __copy_from_user performance
- gpio-poweroff: Allow it to work on Raspberry Pi
- mfd: Add Raspberry Pi Sense HAT core driver
- Add support for all the downstream rpi sound card drivers
- rpi_display: add backlight driver and overlay
- bcm2835-virtgpio: Virtual GPIO driver
- OF: DT-Overlay configfs interface
- brcm: adds support for BCM43341 wifi
- hci_h5: Don't send conf_req when ACTIVE
- ARM64: Round-Robin dispatch IRQs between CPUs.
- ARM64: Force hardware emulation of deprecated instructions.
- AXI performance monitor driver (#2222)
- ARM: bcm2835: Set Serial number and Revision
- dwc-otg: FIQ: Fix "bad mode in data abort handler"
- ARM: Activate FIQs to avoid __irq_startup warnings
- i2c-gpio: Also set bus numbers from reg property
- added capture_clear option to pps-gpio via dtoverlay (#2433)
- lan78xx: Read initial EEE status from DT
- hid: Reduce default mouse polling interval to 60Hz
- Add ability to export gpio used by gpio-poweroff
- firmware/raspberrypi: Notify firmware of a reboot
- irqchip: irq-bcm2835: Calc. FIQ_START at boot-time
- net: lan78xx: Disable TCP Segmentation Offload (TSO)
- brcmfmac: Re-enable firmware roaming support
- lan78xx: Move enabling of EEE into PHY init code
- cxd2880: CXD2880_SPI_DRV should select DVB_CXD2880 with
MEDIA_SUBDRV_AUTOSELECT
- firmware: raspberrypi: Add backward compatible get_throttled
- sc16is7xx: Don't spin if no data received
- drivers: thermal: step_wise: add support for hysteresis
- drivers: thermal: step_wise: avoid throttling at hysteresis temperature
after dropping below it
- net: lan78xx: Support auto-downshift to 100Mb/s
- firmware: raspberrypi: Report the fw variant during probe
- lan78xx: Debounce link events to minimize poll storm
- lan78xx: EEE support is now a PHY property
- bcm2835-dma: Add support for per-channel flags
- rtc: rv3028: Add backup switchover mode support
- media: tc358743: Increase FIFO level to 374.
- media: tc358743: Add support for 972Mbit/s link freq.
- media: tc358743: Check I2C succeeded during probe.
- media: adv7180: Default to the first valid input
- media: adv7180: Add YPrPb support for ADV7282M
- media: videodev2: Add helper defines for printing FOURCCs
- dt-bindings: Document BCM283x CSI2/CCP2 receiver
- MAINTAINERS: Add entry for BCM2835 Unicam driver
- media: tc358743: Return an appropriate colorspace from tc358743_set_fmt
- staging: mmal-vchiq: Avoid use of bool in structures
- staging: mmal-vchiq: Add support for event callbacks.
- staging: vc04_services: Support sending data to MMAL ports
- media: videobuf2: Allow exporting of a struct dmabuf
- staging: mmal-vchiq: Fix client_component for 64 bit kernel
- staging: mmal_vchiq: Add in the Bayer encoding formats
- staging: mmal-vchiq: Update mmal_parameters.h with recently defined params
- staging: mmal-vchiq: Free the event context for control ports
- staging: mmal-vchiq: Fix memory leak in error path
- w1: w1-gpio: Make GPIO an output for strong pullup
- arm: bcm2835: Fix FIQ early ioremap
- arm: bcm2835: DMA can only address 1GB
- hwrng: iproc-rng200: Add BCM2838 support
- bcmgenet: constrain max DMA burst length
- bcmgenet: Better coalescing parameter defaults
- net: genet: enable link energy detect powerdown for external PHYs
- usb: add plumbing for updating interrupt endpoint interval state
- xhci: implement xhci_fixup_endpoint for interval adjustments
- usbhid: call usb_fixup_endpoint after mangling intervals
- arm: bcm2835: Add bcm2838 compatible string.
- i2c: bcm2835: Set clock-stretch timeout to 35ms
- drm/v3d: Clock V3D down when not in use.
- drivers: char: add chardev for mmap'ing the RPiVid control registers
- hid: usb: Add device quirks for Freeway Airmouse T3 and MX3
- net: bcmgenet: Workaround #2 for Pi4 Ethernet fail
- xhci: Use more event ring segment table entries
- arch/arm: Add model string to cpuinfo
- arch/arm64: Add Revision, Serial, Model to cpuinfo
- media: i2c: imx219: Support for the Sony IMX219 sensor
- media: i2c: imx258: Support for the Sony IMX258 sensor
- media: i2c: imx296: Support for the Sony IMX296 sensor
- media: i2c: imx477: Support for the Sony IMX477 sensor
- media: i2c: imx519: Support for the Sony IMX519 sensor
- Documentation: devicetree: Add documentation for imx378 sensor
- v4l2: Add a Greyworld AWB mode.
- staging: bcm2835-camera: Add greyworld AWB mode
- media: v4l2: Add Greyworld AWB control name
- staging:bcm2835-camera: Fix the cherry-pick of AWB Greyworld
- ARM: bcm: Switch board, clk and pinctrl to bcm2711 compatible
- dt-bindings: Add binding for the Infineon IRS1125 sensor
- media: i2c: Add a driver for the Infineon IRS1125 depth sensor
- drm/v3d: Suppress all but the first MMU error
- drm/v3d: Plug dma_fence leak
- staging: vchiq_arm: Register vcsm-cma as a platform driver
- staging: vchiq_arm: Register bcm2835-codec as a platform driver
- net:phy:2711 Allow ethernet LED mode to be set via device tree
- v3d_drv: Handle missing clock more gracefully
- v3d_gem: Kick the clock so firmware knows we are using firmware clock
interface
- clk-raspberrypi: Allow cpufreq driver to also adjust gpu clocks
- staging: vchiq_arm: Set up dma ranges on child devices
- staging: vchiq: Use the old dma controller for OF config on platform devices
- ARM: bcm: Backport BCM2711 support from upstream
- Initialise rpi-firmware before clk-bcm2835
- staging: vchiq_arm: Give vchiq children DT nodes
- pinctrl: bcm2835: Remove gpiochip on error
- video: fbdev: bcm2708_fb: Use common compat header
- of: overlay: Correct symbol path fixups
- dt-bindings: pci: Add DT docs for Brcmstb PCIe device
- bcmgenet: Disable skip_umac_reset by default
- media: videodev2.h: Add a format for column YUV4:2:0 modes
- media: dt-bindings: media: Add binding for the Raspberry PI HEVC decoder
- RFC: media: Add media_request_{pin,unpin} API
- staging: media: rpivid: Add Raspberry Pi V4L2 H265 decoder
- spi: Force CS_HIGH if GPIO descriptors are used
- media: uapi: v4l2-core: Add sensor ancillary data V4L2 foucc type.
- media: uapi: Add MEDIA_BUS_FMT_SENSOR_DATA media bus format
- media: uapi: v4l2-core: Add ISP statistics output V4L2 fourcc type
- media: uapi: v4l-ctrls: Add CID base for the bcm2835-isp driver
- staging: vchiq: Load bcm2835_isp driver from vchiq
- bcm2835-dma: Add proper 40-bit DMA support
- media: i2c: tc358743: Fix fallthrough warning
- video: bcm2708_fb: Disable FB if no displays found
- staging: vc04_services: mmal-vchiq: Update parameters list
- staging:vc04_services: bcm2835-camera: Request headers with I-frame
- zswap: Defer zswap initialisation
- gpiolib: Don't prevent IRQ usage of output GPIOs
- PCI: brcmstb: Add DT property to control L1SS
- media: irs1125: Using i2c_transfer for ic2 reads
- media: irs1125: Refactoring and debug messages
- media: irs1125: Atomic access to imager reconfiguration
- media: irs1125: Keep HW in sync after imager reset
- brcmfmac: Prefer a ccode from OTP over nvram file
- media: bcm2835-unicam: Driver for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Kconfig/Makefile for CCP2/CSI2 camera interface
- media: bcm2835-unicam: Add support for get_mbus_config to set num lanes
- media: bcm2835-unicam: Avoid gcc warning over {0} on endpoint
- serial: 8250: bcm2835aux - defer if clock is zero
- media: Add a pixel format for MIPI packed 12bit luma only.
- media: Add a pixel format for MIPI packed 14bit luma only.
- media: bcm2835-unicam: Add support for 12bit mono packed format
- media: bcm2835-unicam: Add support for 14bit mono sources
- media: bcm2835-unicam: Add support for unpacked 14bit Bayer formats
- bcm2835-dma: Add NO_WAIT_RESP flag
- media: bcm2835-unicam: Reinstate V4L2_CAP_READWRITE in the caps
- media: bcm2835-unicam: Ensure type is VIDEO_CAPTURE in [g|s]_selection
- media: bcm2835: unicam: Set VPU min clock freq to 250Mhz.
- dt-bindings: bcm2835-unicam: Update documentation with new clock params
- leds: Add the actpwr trigger
- bcm2835-dma: Advertise the full DMA range
- media: bcm2835-unicam: Drop WARN on uing direct cache alias
- media: i2c: tc358743: Only allow supported pixel fmts in set_fmt
- media: bcm2835-unicam: Always service interrupts
- media: bcm2835: unicam: Fix uninitialized warning
- media: bcm2835-unicam: Fixup review comments from Hans.
- media: bcm2835-unicam: Retain packing information on G_FMT
- media: bcm2835-unicam: change minimum number of vb2_queue buffers to 1
- staging/fbtft: Add support for display variants
- brcmfmac: Increase power saving delay to 2s
- net: bcmgenet: Reset RBUF on first open
- char: Add broadcom char drivers back to build files
- staging: bcm2835-camera: Replace deprecated V4L2_PIX_FMT_BGR32
- staging: vc04_services: Add new vc-sm-cma driver
- staging: vchiq-mmal: Add support for 14bit Bayer
- staging: mmal-vchiq: Add monochrome image formats
- staging: mmal-vchiq: Use vc-sm-cma to support zero copy
- staging: vc04_services: Add a V4L2 M2M codec driver
- bcm2835-dma: only reserve channel 0 if legacy dma driver is enabled
- uapi: bcm2835-isp: Add bcm2835-isp uapi header file
- staging: vc04_services: ISP: Add a more complex ISP processing component
- gpio: Add gpio-fsm driver
- rpisense-fb: Set pseudo_pallete to prevent crash on fbcon takeover
- bcm2708_fb: Fix a build warning
- watchdog: bcm2835: Ignore params after the partition number
- firmware: raspberrypi: Add support for tryonce reboot flag
- phy: broadcom: split out the BCM54213PE from the BCM54210E IDs
- phy: broadcom: Add bcm54213pe configuration
- PCI: brcmstb: Restore initial fundamental reset
- Input: edt-ft5x06: Poll the device if no interrupt is configured.
- drm/panel/raspberrypi-touchscreen: Use independent I2C actions with delay.
- drm/panel/raspberrypi-ts: Insert delay before polling for startup state
- dt-bindings: Add compatible for BCM2711 DSI1
- media: bcm2835-unicam: Correctly handle error propagation for stream on
- media: bcm2835-unicam: Return early from stop_streaming() if stopped
- media: bcm2835-unicam: Clear clock state when stopping streaming
- PCI: brcmstb: Advertise MSI-X support
- net: lan78xx: Ack pending PHY ints when resetting
- vc-sm-cma: fixed kbuild problem
- staging/vc04_services: Add additional unpacked raw formats
- staging/bcm2835-isp: Add the unpacked (16bpp) raw formats
- staging/bcm2835-isp: Log the number of excess supported formats
- bcm2835-dma: Avoid losing CS flags after interrupt
- bcm2835-dma: Add bcm2835-dma: Add DMA_WIDE_SOURCE and DMA_WIDE_DEST flags
- uapi: bcm2835-isp: Add colour denoise configuration
- staging: vc04_services: ISP: Add colour denoise control
- spi: bcm2835: Workaround/fix for zero-length transfers
- kbuild: Silence unavoidable dtc overlay warnings
- bcm2835-isp: Allow formats with different colour spaces.
- media: bcm2835-unicam: Fix bug in buffer swapping logic
- Assign crypto aliases to different AES implementation modules
- media/v4l2_m2m: In buffered mode run jobs if either port is streaming
- media: i2c: add ov9281 driver.
- media: ov5647: Fix return codes from ov5647_write/ov5647_read functions.
- media: i2c: ov5647: Parse and register properties
- staging/bcm2835-camera: Add support for DMABUFs
- staging: fbtft: Add minipitft13 variant
- drm/panel: jdi-lt070me05000: Use gpiod_set_value_cansleep
- staging/bcm2835-camera: Add support for H264 levels 4.1 and 4.2
- staging/bcm2835-isp: Fix compiler warning
- gpio-poweroff: Remember the old poweroff handler
- media: i2c: ov5647: Correct pixel array offset
- media: i2c: ov5647: Correct minimum VBLANK value
- media: i2c: ov5647: Fix v4l2-compliance failure subscribing to events
- staging: vc04_services: isp: Set the YUV420/YVU420 format stride to 64 bytes
- media: bcm2835-unicam: Forward input status from subdevice
- media: i2c: ov7251: Add fwnode properties controls
- usb: xhci: workaround for bogus SET_DEQ_PENDING endpoint state
- staging: vchiq_arm: Add 36-bit address support
- staging: vchiq_arm: children inherit DMA config
- staging: vchiq_arm: Usa a DMA pool for small bulks
- drm/panel/raspberrypi-touchscreen: Handle I2C errors.
- drm/panel-simple: Add a timing for the Raspberry Pi 7" panel
- Input: edt-ft54x6: Clean up timer and workqueue on remove
- staging/vchiq-mmal: Add buffer flags for interlaced video
- staging/vchiq-mmal: Add parameters for interlaced video support
- staging/vchiq-mmal: Add the deinterlace image effects enums
- Add Raspberry Pi PoE+ HAT support
- staging/mmal-vchiq: Rationalise included headers
- staging/mmal-vchiq: Add module parameter to enable logging.
- staging: mmal-vchiq: Reset buffers_with_vpu on port_enable
- drivers/gpio: Add a driver that wraps the PWM API as a GPIO controller
- media: i2c: ov5647: Sensor should report RAW color space
- vc04_services: isp: Report input node as wanting full range RAW color space
- media/bcm2835-unicam: Parse pad numbers correctly
- media/bcm2835-unicam: Add support for configuration via MC API
- staging/bcm2835-camera: Add support for H264_MIN_QP, H264_MAX_QP
- staging/bcm2835-camera: Add support for MPEG_VIDEO_FORCE_KEY_FRAME
- brcmfmac: Don't promote INFO logging to ERR
- media: i2c: ov5647: Support HFLIP and VFLIP
- drivers: bcm2835_isp: Allow multiple users for the ISP driver.
- drivers: bcm2835_isp: Fix div by 0 bug.
- spi: spidev: Restore loading from Device Tree
- input: edt-ft5x06: Handle unreliable TOUCH_UP events
- drivers: bcm2835_unicam: Add logging message when a frame is dropped.
- regulator/rpi-panel-attiny: Don't read the LCD power status
- input: edt-ft5x06: Only look at the number of points reported
- rtc: pcf8523: Fix oscillator stop bit handling
- drm/panel-simple: Populate bpc when using panel-dpi
- drm/panel-simple: Allow the bus format to be read from DT for panel-dpi
- xhci: quirks: add link TRB quirk for VL805
- xhci: correct room_on_ring() for cases where there is a single segment
- xhci: refactor out TRBS_PER_SEGMENT define in runtime code
- usb: xhci: add VLI_TRB_CACHE_BUG quirk
- media: i2c: ov5647: Add support for regulator control.
- media: i2c: ov7251: Make the enable GPIO optional.
- staging/bcm2835-isp: Fix cleanup after init fail
- uapi/v4l2-controls: Reset V4L2_CID_USER_BCM2835_ISP_BASE to same as 5.10
- bcm2835-v4l2-isp: Add missing lock initialization
- mfd: simple-mfd-i2c: Add configuration for RPi POE HAT
- pwm: raspberrypi-poe: Add option of being created by MFD or FW
- power: rpi-poe: Drop CURRENT_AVG as it is not hardware averaged
- power: rpi-poe: Add option of being created by MFD or FW
- drivers: bcm2835_unicam: Disable trigger mode operation
- Extending ili9881c driver support for nwe080 panel
- media: bcm2835-unicam: Set ret on error path in unicam_async_complete()
- i2c: bcm2835: Make clock-stretch timeout configurable
- Patching lan78xx for SOF_TIMESTAMPING_TX_SOFTWARE support
- media: uapi: Document format MEDIA_BUS_FMT_RGB565_1X24_CPADHI
- dt-bindings: vendor-prefixes: Add Geekworm
- dt-bindings: display: simple: add Geekworm MZP280 Panel
- drm/panel: simple: add Geekworm MZP280 Panel
- drm/panel: simple: Remove custom handling of orientation
- drm/panel: Add panel driver for Ilitek ILI9806E panel
- drm/panel: Add panel driver for TDO Y17B based panels
- bindings: Add sck-idle-input to spi-gpio
- spi: gpio: Add sck-idle-input property
- media: bcm2835-unicam: Handle a repeated frame start with no end
- usb: xhci: add a quirk for Superspeed bulk OUT transfers on VL805
- media: i2c: ov7251: Reinstate setting ov7251_global_init_setting
- usb: xhci: rework XHCI_VLI_SS_BULK_OUT_BUG quirk
- media/i2c: Add driver for Omnivision OV2311
- staging: vc04_services: isp: Permit all sRGB colour spaces on ISP outputs
- drivers: staging: bcm2835-isp: Do not cleanup mmal vcsm buffer on
stop_streaming
- dt-bindings: media: i2c: Add binding for ad5398 VCM
- media: i2c: Add driver for AD5398 VCM lens driver
- media: i2c: ov5647: Use v4l2_async_register_subdev_sensor for lens binding
- media: i2c: Rename ad5398 to ad5398_vcm
- drivers: staging: bcm2835-isp: Clear LS table handle in the firmware
- mm,page_alloc,cma: introduce a customisable threshold for allocating pages
in cma
- pinctrl: bcm2835: Only return non-GPIOs to inputs
- drm/panel: ilitek-ili9881c: Clean up on mipi_dsi_attach failure
- drm/panel: panel-ilitek9881c: Add prepare_upstream_first flag
- clk-bcm2835: use subsys_initcall for the clock driver when IMA is enabled
- tpm_tis_spi_main: Force probe routine to run synchronously with driver and
device registration when IMA is enabled
- staging: vchiq_arm: Add log_level module params
- dt-bindings: vendor-prefixes: Add Arducam
- media: dt-bindings: media: i2c: Add Arducam Pivariety Series CMOS sensor
binding
- media: i2c: Add driver of Arducam Pivariety series camera
- thermal: broadcom: Use dev_err_probe to suppress defer errors
- dt-bindings: hwmon: add microchip,emc2305.yaml dt binding description.
- dtbindings: Fixup microchip,emc2305.yaml bindings
- media: i2c: Update ov2311 Kconfig entry
- media: i2c: Update irs1125 Kconfig entry
- media: i2c: arducam-pivariety: Fixup for mainline API changes
- mmc: block: Don't do single-sector reads during recovery
- vc04_services: vchiq-mmal: Add defines for mmal_es_format flags
- random: do not use jump labels before they are initialized
- drm/v3d: Switch clock setting to new api
- clk-raspberrypi: Enable minimize for all firmware clocks
- media: dt-bindings: media: i2c: Add Arducam 64MP CMOS sensor binding
- media: i2c: Add driver of Arducam 64MP camera
- media: i2c: arducam_64mp: Advertise embedded data node on media pad 1
- Add HDMI1 facility to the driver.
- Populate phy driver block for BCM54213PE
- clk: bcm: rpi: Add the BCM283x pixel clock.
- media: bcm2835-unicam: Correctly handle FS + FE ISR condtion
- drm/panel-simple: hack ignore orientation
- vc04_services/vc-sm-cma: Handle upstream require vchiq_instance to be passed
around
- media: video-mux: Read CSI2 config from FW, and pass to receiver
- media: i2c: arducam-pivariety: Add custom controls
- media: bcm2835-unicam: Fix for possible dummy buffer overrun
- usb: xhci: expand mitigations for VLI_SS_BULK_OUT_BUG quirk
- usb: xhci: account for num_trbs_free when invalidating TDs
- nvmem: Use NVMEM_DEVID_AUTO
- brcmfmac: Read alternative firmware names from DT
- drm/panel: Rename GEM CMA helpers GEM DMA helpers
- hwmon: emc2305: fixups for driver submitted to mailing lists
- media: bcm2835-unicam: Fix up start/stop api change
- drivers: usb: dwc_otg: fix reference passing when checking bandwidth
- drivers: dwc_otg: stop GCC from patching FIQ functions
- net: phy: BCM54210PE does not support PTP
- media: adv7180: Nasty hack to allow input selection.
- vc04_services: bcm2835_codec: Allow larger images through the ISP
- ASoC:ma120x0p: Corrects the volume level display
- usb: xhci: add XHCI_VLI_HUB_TT_QUIRK
- media: i2c: ov7251: Add module param to select ext trig mode
- Documentation: gpu: vc4: Add KUnit Tests Section
- drm/panel: panel-ilitek9881c: Use cansleep methods
- drm/panel: panel-ilitek9881c: Crystalfontz support
- net: bcmgenet: Add 'eee' module parameter
- drm/panel: simple: Add Innolux AT056tN53V1 5.6" VGA
- configs: Add PWM=y and NFSD_V2=y
- drm/vc4: Fix YUV plane handling when planes are in different buffers
- overlays: audremap: Fix setting of the pin function
- media: dt-bindings: Add DW9817 to DW9807 binding
- media: dw9807-vcm: Add support for DW9817 bidirectional VCM driver
- media: dt-bindings: Add regulator to dw9807-vcm
- media: dw9807-vcm: Add regulator support to the driver
- media: dw9807-vcm: Smooth the first user movement of the lens
- dtbindings: media: i2c: Add IMX708 CMOS sensor binding
- media/i2c: Add a driver for the Sony IMX708 image sensor
- defconfigs: Add IMX708 to all Pi defconfigs
- dtoverlays: Add overlays for the IMX708 image sensor
- net: phy: broadcom: Make LEDs 3+4 shadow LEDs 1+2
- overlays: i2c-sensor: MS temp & pressure sensors
- configs: Enable the MS5637 temp + pressure driver
- defconfigs: Switch from the downstream OV9281 to mainline OV9282 driver
- drivers: media: imx708: Enable long exposure mode
- drivers: media: i2c: imx708: Fix crop information
- configs: Add DM_MULTIPATH=m
- drm_probe_helper: Cancel previous job before starting new one
- arch: fixup after fix to broken BuildID
- drm/vc4: hdmi: Correct CSC setup for YCbCr4:4:4
- drm/vc4: hdmi: Add property to allow manual config of RGB or YCbCr
- bcm2835-mmc: Honor return value of mmc_of_parse()
- overlays: i2c-sensor: Add mpu6050 and mpu9250
- configs: Enable BNO055 IMU sensor
- overlays: i2c-sensor: Use TABs for indentation
- overlays: i2c-sensor: Add BNO055 IMU sensor
- dtoverlay: Update vc4-kms-dpi-generic for changed mediabus formats
- Revert downstream imx290 patches
- media: i2c: imx290: Group functions in sections
- media: i2c: imx290: Factor out subdev init and cleanup to functions
- media: i2c: imx290: Factor out control update code to a function
- media: i2c: imx290: Access link_freq_index directly
- media: i2c: imx290: Pass format and mode to imx290_calc_pixel_rate()
- media: i2c: imx290: Compute pixel rate and blanking in one place
- media: i2c: imx290: Factor out black level setting to a function
- media: i2c: imx290: Factor out DT parsing to separate function
- media: i2c: imx290: Use dev_err_probe()
- media: i2c: imx290: Factor out clock initialization to separate function
- media: i2c: imx290: Use V4L2 subdev active state
- media: i2c: imx290: Rename, extend and expand usage of imx290_pixfmt
- media: i2c: imx290: Use runtime PM autosuspend
- media: i2c: imx290: Initialize runtime PM before subdev
- media: i2c: imx290: Configure data lanes at start time
- media: i2c: imx290: Simplify imx290_set_data_lanes()
- media: i2c: imx290: Handle error from imx290_set_data_lanes()
- media: dt-bindings: media: i2c: Add mono version to IMX290 bindings
- media: i2c: imx290: Match kernel coding style on whitespace
- media: i2c: imx290: Set the colorspace fields in the format
- media: i2c: imx290: Add V4L2_SUBDEV_FL_HAS_EVENTS and subscribe hooks
- media: i2c: imx290: Add support for the mono sensor variant.
- media: i2c: imx290: Fix the pixel rate at 148.5Mpix/s
- media: i2c: imx290: Support 60fps in 2 lane operation
- media: i2c: imx290: Use CSI timings as per datasheet
- media: i2c: imx290: Convert V4L2_CID_HBLANK to read/write
- media: i2c: imx290: Convert V4L2_CID_VBLANK to read/write
- media: i2c: imx290: Remove duplicated write to IMX290_CTRL_07
- media: i2c: imx290: Add support for 74.25MHz external clock
- media: i2c: imx290: Add support for H & V Flips
- vc04_services: vcsm-cma: Detach from the correct dmabuf
- media: bcm2835-unicam: Use mipi-csi2.h header for data type values
- media: bcm2835-unicam: Add support for RAW16 formats
- drm/vc4: hvs: Defer dlist slots deallocation
- vc4/hdmi: Always enable GCP with AVMUTE cleared
- media: bcm2835-v4l2-codec: Enable selection ioctl for ISP
- configs: Enable the sht4x driver
- overlays: i2c-sensor: Add SHT4X support
- drm/vc4: hvs: Initialize the dlist allocation list entry
- drm/vc4: hvs: Move the dlist allocation destruction to a function
- drm/vc4: hvs: Destroy dlist allocations immediately when running a test
- configs: add CONFIG_DM_INTEGRITY=m
- configs: Add MTD_SPI_NAND=m
-- Juerg Haefliger <juerg.haefliger at canonical.com> Thu, 09 Mar 2023
17:22:26 +0100
** Changed in: linux-raspi (Ubuntu Lunar)
Status: New => Fix Released
--
You received this bug notification because you are a member of Ubuntu
Package Archive Administrators, which is a bug assignee.
https://bugs.launchpad.net/bugs/2009847
Title:
lunar/linux-raspi: 6.2.0-1003.3 -proposed tracker
To manage notifications about this bug go to:
https://bugs.launchpad.net/canonical-signing-jobs/task00/+bug/2009847/+subscriptions
More information about the ubuntu-archive
mailing list