[ubuntu-ar] SOLUCIONADO: Ubuntu 16.04: sin red cableada.
Dardo Eloy
eloydardo at gmail.com
Wed Apr 27 01:01:53 UTC 2016
El 26/04/16 a las 09:50, francisco prieto escribió:
> Para el tema driver revisa de instalar o tener instalado este que es el de
> tu placa
>
> http://www.realtek.com.tw/Downloads/downloadsView.aspx?Langid=1&PNid=13&PFid=5&Level=5&Conn=4&DownTypeID=3&GetDown=false#2
>
> En el siguiente link dice como instalarlo
>
> http://askubuntu.com/questions/158348/where-do-i-find-drivers-for-the-realtek-8111e-lan-controller
>
> Saludos,
>
> Pancho
> Córdoba
> Argentina
>
> El mar., 26 abr. 2016 a las 9:39, Marco Antonio (<mhoyos en gmail.com>)
> escribió:
>
>> buenos dias..
>>
>> revisa estos links para "renombrar" la red :
>>
>>
>> https://airtoncs.wordpress.com/2015/01/14/how-to-change-interface-card-name-on-ubuntu/
>>
>>
>> http://askubuntu.com/questions/689501/how-to-rename-network-interface-in-15-10
>>
>>
>> http://askubuntu.com/questions/689070/network-interface-name-changes-after-update-to-15-10-udev-changes
>>
>> http://forums.debian.net/viewtopic.php?f=5&t=124796
>>
>> saludos.
>>
>> El día 26 de abril de 2016, 9:31, Dardo Eloy <eloydardo en gmail.com>
>> escribió:
>>>
>>> El 26/04/16 a las 09:19, francisco prieto escribió:
>>>
>>>> Dardo,
>>>>
>>>> Quizas sea un tema de driver... que placa tiene? o bien que Mother es?
>>>>
>>>> Saludos,
>>>>
>>>> Pancho
>>>> Córdoba
>>>> Argentina
>>>>
>>>> El mar., 26 abr. 2016 a las 9:16, Dardo Eloy (<eloydardo en gmail.com>)
>>>> escribió:
>>>>
>>>>> El 25/04/16 a las 19:40, Franco Giovanolli escribió:
>>>>>> 2016-04-25 18:47 GMT-03:00 Dardo Eloy <eloydardo en gmail.com>:
>>>>>>
>>>>>>> Perdon.
>>>>>>> Pero nadie en esta lista tiene algo para decir sobre este problema
>> que
>>>>> se
>>>>>>> me presento.
>>>>>>>
>>>>>>> Por favor si insisto es porque no pude solucionarlo..Gracias
>>>>>>>
>>>>>>>
>>>>>>> El 25/04/16 a las 09:33, Dardo Eloy escribió:
>>>>>>>
>>>>>>> Estimados.
>>>>>>>> Continuo con el tema de la tarjeta de red.
>>>>>>>> Veo que el modulo parece estar cargado. En teria eso dice lsmod.
>>>>>>>>
>>>>>>>>
>>>>>>>> Module Size Used by
>>>>>>>> r8169 77824 0
>>>>>>>> mii 16384 1 r8169
>>>>>>>>
>>>>>>>> dmesg | grep 8169
>>>>>>>> [ 1.692992] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
>>>>>>>> [ 1.693517] r8169 0000:04:00.0 eth0: RTL8168c/8111c at
>> 0xf8468000,
>>>>>>>> 00:23:8b:5d:67:c4, XID 1c2000c0 IRQ 27
>>>>>>>> [ 1.693521] r8169 0000:04:00.0 eth0: jumbo features [frames: 6128
>>>>>>>> bytes, tx checksumming: ko]
>>>>>>>> [ 1.794425] r8169 0000:04:00.0 enp4s0: renamed from eth0
>>>>>>>> [ 16.533780] r8169 0000:04:00.0 enp4s0: link down
>>>>>>>>
>>>>>>>> dmesg | grep Net
>>>>>>>> [ 0.137222] NetLabel: Initializing
>>>>>>>> [ 0.137225] NetLabel: domain hash size = 128
>>>>>>>> [ 0.137226] NetLabel: protocols = UNLABELED CIPSOv4
>>>>>>>> [ 0.137241] NetLabel: unlabeled traffic allowed by default
>>>>>>>> [ 1.646065] FUJITSU Extended Socket Network Device Driver -
>> version
>>>>>>>> 1.0 - Copyright (c) 2015 FUJITSU LIMITED
>>>>>>>> [ 13.149907] audit: type=1400 audit(1461586616.452:3):
>>>>>>>> apparmor="STATUS" operation="profile_load" profile="unconfined"
>>>>>>>> name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=646
>>>>>>>> comm="apparmor_parser"
>>>>>>>> [ 13.149914] audit: type=1400 audit(1461586616.452:4):
>>>>>>>> apparmor="STATUS" operation="profile_load" profile="unconfined"
>>>>>>>> name="/usr/lib/NetworkManager/nm-dhcp-helper" pid=646
>>>>> comm="apparmor_parser"
>>>>>>>> Por favor alguien que sepa de driver en linux?? Mi tira un clable!!
>>>>>>>>
>>>>>>>> Gracias.
>>>>>>>>
>>>>>>>> El 24/04/16 a las 18:26, Dardo Eloy escribió:
>>>>>>>>
>>>>>>>>> Hola.
>>>>>>>>> Actualice desde ubuntu 12.04 al 16.04 mate.
>>>>>>>>>
>>>>>>>>> No tengo red cableada si wifi. Antes si funcionaba la ethernet.
>>>>>>>>> Ahora dice *red no gestionada.*
>>>>>>>>>
>>>>>>>>> driver=r8169
>>>>>>>>> *-network
>>>>>>>>> descripción: Ethernet interface
>>>>>>>>> producto: RTL8111/8168/8411 PCI Express Gigabit
>>>>> Ethernet
>>>>>>>>> Controller
>>>>>>>>> fabricante: Realtek Semiconductor Co., Ltd.
>>>>>>>>> id físico: 0
>>>>>>>>> información del bus: pci en 0000:04:00.0
>>>>>>>>> nombre lógico: enp4s0
>>>>>>>>> versión: 02
>>>>>>>>> serie: 00:23:8b:5d:67:c4
>>>>>>>>> tamaño: 10Mbit/s
>>>>>>>>> capacidad: 1Gbit/s
>>>>>>>>> anchura: 64 bits
>>>>>>>>> reloj: 33MHz
>>>>>>>>> capacidades: pm msi pciexpress msix vpd
>> bus_master
>>>>>>>>> cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd
>>>>> 1000bt
>>>>>>>>> 1000bt-fd autonegotiation
>>>>>>>>> configuración: autonegotiation=on broadcast=yes
>>>>>>>>> driver=r8169 driverversion=2.3LK-NAPI duplex=half latency=0 link=no
>>>>>>>>> multicast=yes port=MII speed=10Mbit/s
>>>>>>>>> recursos: irq:27 ioport:1000(size=256)
>>>>>>>>> memoria:d2410000-d2410fff memoria:d2400000-d240ffff
>>>>>>>>> memoria:d3600000-d360ffff
>>>>>>>>>
>>>>>>>>> En algunos foros dicen que hay que descargar el r8168 y poner el
>>>>>>>>> driver=r8169 en blacklist.
>>>>>>>>>
>>>>>>>>> Tampoco consegui para este kernel el r8168. Los que descargue no
>>>>>>>>> compilaron.
>>>>>>>>>
>>>>>>>>>
>>>>>>>>> Por otro lado tambien veo que cambio el nobre lógico enp4s0. Antes
>>>>> decia
>>>>>>>>> eth0.
>>>>>>>>>
>>>>>>>>> ifconfig.
>>>>>>>>> enp4s0 Link encap:Ethernet direcciónHW 00:23:8b:5d:67:c4
>>>>>>>>> ACTIVO DIFUSIÓN MULTICAST MTU:1500 Métrica:1
>>>>>>>>> Paquetes RX:0 errores:0 perdidos:0 overruns:0 frame:0
>>>>>>>>> Paquetes TX:0 errores:0 perdidos:0 overruns:0 carrier:0
>>>>>>>>> colisiones:0 long.colaTX:1000
>>>>>>>>> Bytes RX:0 (0.0 B) TX bytes:0 (0.0 B)
>>>>>>>>>
>>>>>>>>> Si alguien me puede dar una mano con este tema lo agradezco.
>>>>>>>>> Saludos,
>>>>>> Dardo, como estas, no estoy usando 16.04, pero te respondo cosas
>> básicas
>>>>>> pero que habría que verificar.
>>>>>>
>>>>>> La placa linkea? :)
>>>>>>
>>>>>> Pasate la salida de
>>>>>>
>>>>>> ethtool enp4s0
>>>>>>
>>>>>> Probaste levantar una IP a mano, por ejemplo si el rango es
>>>>> 192.168.1.0/24,
>>>>>> podes probar con:
>>>>>>
>>>>>> ifconfig enp4s0 192.168.1.200 netmask 255.255.255.0
>>>>>>
>>>>>> Y hacer un ping a otro host o a la puerta de enlace:
>>>>>>
>>>>>> ping 192.168.1.1
>>>>>>
>>>>>> Las pruebas hacelas con el wifi desconectado.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Slds,
>>>>>> Franco.
>>>>> Franco. Gracias por responder.
>>>>> Intente con un ip estatica. sin novedades.
>>>>> ethtool No linkea.
>>>>>
>>>>> ethtool enp4s
>>>>> Supported ports: [ TP MII ]
>>>>> Supported link modes: 10baseT/Half 10baseT/Full
>>>>> 100baseT/Half 100baseT/Full
>>>>> 1000baseT/Half 1000baseT/Full
>>>>> Supported pause frame use: No
>>>>> Supports auto-negotiation: Yes
>>>>> Advertised link modes: 10baseT/Half 10baseT/Full
>>>>> 100baseT/Half 100baseT/Full
>>>>> 1000baseT/Half 1000baseT/Full
>>>>> Advertised pause frame use: Symmetric Receive-only
>>>>> Advertised auto-negotiation: Yes
>>>>> Speed: 10Mb/s
>>>>> Duplex: Half
>>>>> Port: MII
>>>>> PHYAD: 0
>>>>> Transceiver: internal
>>>>> Auto-negotiation: on
>>>>> Supports Wake-on: pumbg
>>>>> Wake-on: d
>>>>> Current message level: 0x00000033 (51)
>>>>> drv probe ifdown ifup
>>>>> Link detected: no
>>>>>
>>>>>
>>>>> cat /sys/class/net/enp4s0/carrier
>>>>> 0
>>>>> sudo ifconfig enp4s0 up
>>>>>
>>>>> Y sigue sin lenvantar
>>>>>
>>>>>
>>>>> --
>>> Hola.
>>> recien probe con este comando:
>>>
>>> sudo ethtool -s enp4s0 autoneg off speed 100 duplex full
>>>
>>> Y hubo novedades. las luces del slot del rj45 titilan. Luego
>>>
>>> este otro comando ahora devolvio 1.
>>> cat /sys/class/net/enp4s0/carrier
>>> 1
>>> es decir reconoce la conoce la conexion.
>>>
>>> Pero sigo sin navagar por cable. Y el manager network sigue diciendo Red
>> no
>>> gestionada.
>>> El mn esta configurado con dhcp.
>>>
>>> Quizas sea un tema de driver... que placa tiene?
>>>
>>>
>>> El driver r8169.
>>> descripción: Ethernet interface
>>> producto: RTL8111/8168/8411 PCI Express Gigabit Ethernet
>>> Controller
>>> fabricante: Realtek Semiconductor Co., Ltd.
>>> id físico: 0
>>> información del bus: pci en 0000:04:00.0
>>> nombre lógico: enp4s0
>>> versión: 02
>>> serie: 00:23:8b:5d:67:c4
>>> tamaño: 100Mbit/s
>>> capacidad: 1Gbit/s
>>> anchura: 64 bits
>>> reloj: 33MHz
>>>
>>> capacidades: pm msi pciexpress msix vpd bus_master
>> cap_list
>>> rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd
>>> autonegotiation
>>>
>>> configuración: autonegotiation=off broadcast=yes
>>> driver=r8169 driverversion=2.3LK-NAPI duplex=full ip=192.168.1.200
>> latency=0
>>> link=yes multicast=yes port=MII speed=100Mbit/s
>>>
>>> recursos: irq:27 ioport:1000(size=256)
>>> memoria:d2410000-d2410fff memoria:d2400000-d240ffff
>>> memoria:d3600000-d360ffff
>>>
>>>
>>> Hubo un avance.
>>>
>>> Gracias.
>>>
>>>
Hola gente.
Muchas gracias a todos por sus respuestas las mismas fueron de gran
utilidad.
Por el momento la solución fue la siguiente:
Hubo tres pasos que realice.
1-
renombrar creando un archivo. enp4s0 a eth0
sudo pluma /etc/udev/rules.d/70-persistent-net.rules
NAME=eth0
2-
editar /etc/network/interfaces
puse eth0
# interfaces(5) file used by ifup(8) and ifdown(8)
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet dhcp
3-
Y tuve que agregar en /etc/rc.local la siguiente linea para que se
ejecute luego de cada inicio.
ethtool -s enp4s0 autoneg off speed 100 duplex full
Ahora quedo asi.
configuración: autonegotiation=off broadcast=yes driver=r8169
driverversion=2.3LK-NAPI duplex=full ip=192.168.0.101 latency=0 link=yes
multicast=yes port=MII speed=100Mbit/s
saludos!!
Muchas gracias por estar!! :)
>>
>>
>>
>>
>>
>>
>>
>>
More information about the Ubuntu-ar
mailing list