[ubuntu-ar] Fwd: Nagios snmp monitoreo con ubuntu

[martin Rodriguez]

Hola comunidad, tengo un problema con nagios sobre ubuntu. Tras las
configuraciones tuve qué instalar el servicio snmp pero no termino dando
con una configuración adecuada ya la monitoria es hacia windows y Linux, me
podrán orientar con respeto a las configuraciones

este es mi archivo de configuración en el servidor
snmpd.com

                                                 #  system + hrSystem
groups only

                                                 #  Full access from the
local host
#rocommunity public  localhost
                                                 #  Default access to basic
system info
rwcommunity public  default    -V systemonly

                                                 #  Full access from an
example network
                                                 #     Adjust this network
address to match your local
                                                 #     settings, change the
community string,
                                                 #     and check the
'agentAddress' setting above
#rocommunity secret  10.0.0.0/16

                                                 #  Full read-only access
for SNMPv3
rouser   authOnlyUser
view   systemonly  included   .1.3.6.1.2.1.1
view   systemonly  included   .1.3.6.1.2.1.25.1
                                                 #  Full write access for
encrypted requests
                                                 #     Remember to activate
the 'createUser' lines above
#rwuser   authPrivUser   priv

#  It's no longer typically necessary to use the full
'com2sec/group/access' configuration
#  r[ou]user and r[ow]community, together with suitable views, should cover
most requirements



###############################################################################
#
#  SYSTEM INFORMATION
#

#  Note that setting these values here, results in the corresponding MIB
objects being 'read-only'
#  See snmpd.conf(5) for more details
sysLocation    Sitting on the Dock of the Bay
sysContact     Me <me en example.org>
                                                 # Application + End-to-End
layers
sysServices    72


#
#  Process Monitoring
#
                               # At least one  'mountd' process
proc  mountd
                               # No more than 4 'ntalkd' processes - 0 is OK
proc  ntalkd    4
                               # At least one 'sendmail' process, but no
more than 10
#proc  sendmail 10 1

#  Walk the UCD-SNMP-MIB::prTable to see the resulting output
#  Note that this table will be empty if there are no "proc" entries in the
snmpd.conf file


#
#  Disk Monitoring
#
                               # 10MBs required on root disk, 5% free on
/var, 10% free on all other disks
disk       /     10000
disk       /var  5%
includeAllDisks  10%

#  Walk the UCD-SNMP-MIB::dskTable to see the resulting output
#  Note that this table will be empty if there are no "disk" entries in the
snmpd.conf file


#
#  System Load
#
                               # Unacceptable 1-, 5-, and 15-minute load
averages
load   12 10 5

#  Walk the UCD-SNMP-MIB::laTable to see the resulting output
#  Note that this table *will* be populated, even without a "load" entry in
the snmpd.conf file



###############################################################################
#
#  ACTIVE MONITORING
#

                                    #   send SNMPv1  traps
trapsink     localhost public
                                    #   send SNMPv2c traps
trap2sink    localhost public
                                    #   send SNMPv2c INFORMs
informsink   localhost public

#  Note that you typically only want *one* of these three lines
#  Uncommenting two (or all three) will result in multiple copies of each
notification.


#
#  Event MIB - automatically generate alerts
#
                                   # Remember to activate the 'createUser'
lines above
iquerySecName   internalUser
rouser          internalUser
                                   # generate traps on UCD error conditions
defaultMonitors          yes
                                   # generate traps on linkUp/Down
linkUpDownNotifications  yes



###############################################################################
#
#  EXTENDING THE AGENT
#

#
#  Arbitrary extension commands
#
 extend    test1   /bin/echo  Hello, world!
 extend-sh test2   echo Hello, world! ; echo Hi there ; exit 35
#extend-sh test3   /bin/sh /tmp/shtest

#  Note that this last entry requires the script '/tmp/shtest' to be
created first,
#    containing the same three shell commands, before the line is
uncommented

#  Walk the NET-SNMP-EXTEND-MIB tables (nsExtendConfigTable,
nsExtendOutput1Table
#     and nsExtendOutput2Table) to see the resulting output

#  Note that the "extend" directive supercedes the previous "exec" and "sh"
directives
#  However, walking the UCD-SNMP-MIB::extTable should still returns the
same output,
#     as well as the fuller results in the above tables.


#
#  "Pass-through" MIB extension command
#
#pass .1.3.6.1.4.1.8072.2.255  /bin/sh       PREFIX/local/passtest
#pass .1.3.6.1.4.1.8072.2.255  /usr/bin/perl PREFIX/local/passtest.pl

# Note that this requires one of the two 'passtest' scripts to be installed
first,
#    before the appropriate line is uncommented.
# These scripts can be found in the 'local' directory of the source
distribution,
#     and are not installed automatically.

#  Walk the NET-SNMP-PASS-MIB::netSnmpPassExamples subtree to see the
resulting output


#
#  AgentX Sub-agents
#
                                           #  Run as an AgentX master agent
 master          agentx
                                           #  Listen for network
connections (from localhost)
                                           #    rather than the default
named socket /var/agentx/master
#agentXSocket    tcp:localhost:705

SNmP.comf

# As the snmp packages come without MIB files due to license reasons,
loading
# of MIBs is disabled by default. If you added the MIBs you can reenable
# loaging them by commenting out the following line.
mibs :
------------ pr?xima parte ------------
Se ha borrado un adjunto en formato HTML...
URL: <https://lists.ubuntu.com/archives/ubuntu-ar/attachments/20130522/3f89631e/attachment.html>