[ubuntu-ar] Modem huawei e 173

Alejandro bosch usuario1001 at gmail.com
Fri Feb 4 20:49:59 UTC 2011


Hola amigos, sigo intentando usar mi huawei, intente reiniciar con el
módem enchufado como me sugirió Hector y no pasa nada.
Les copio la salida de estos comandos para ver si me pueden aportar
algún hilo para empezar a tirar del ovillo.
Gracias.
alejandro en alejandro-HP-Pavilion-dv5-Notebook-PC:~$ dmesg
  0.560231] pci_bus 0000:07: resource 0 [io  0x2000-0x2fff]
[    0.560233] pci_bus 0000:07: resource 1 [mem 0xd6600000-0xd75fffff]
[    0.560236] pci_bus 0000:07: resource 2 [mem 0xd5500000-0xd64fffff
64bit pref]
[    0.560239] pci_bus 0000:0a: resource 4 [io  0x0000-0x0cf7]
[    0.560241] pci_bus 0000:0a: resource 5 [io  0x0d00-0xffff]
[    0.560244] pci_bus 0000:0a: resource 6 [mem 0x000a0000-0x000bffff]
[    0.560246] pci_bus 0000:0a: resource 7 [mem 0xc0000000-0xfebfffff]
[    0.560288] NET: Registered protocol family 2
[    0.560450] IP route cache hash table entries: 131072 (order: 8,
1048576 bytes)
[    0.561776] TCP established hash table entries: 524288 (order: 11,
8388608 bytes)
[    0.566987] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.567669] TCP: Hash tables configured (established 524288 bind 65536)
[    0.567672] TCP reno registered
[    0.567685] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.567732] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.567917] NET: Registered protocol family 1
[    0.567938] pci 0000:00:02.0: Boot video device
[    0.568483] PCI: CLS 64 bytes, default 64
[    0.568526] Simple Boot Flag value 0x5 read from CMOS RAM was invalid
[    0.568528] Simple Boot Flag at 0x44 set to 0x1
[    0.568726] Scanning for low memory corruption every 60 seconds
[    0.568910] audit: initializing netlink socket (disabled)
[    0.568923] type=2000 audit(1296840072.550:1): initialized
[    0.584467] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.585938] VFS: Disk quotas dquot_6.5.2
[    0.585996] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.586563] fuse init (API version 7.14)
[    0.586650] msgmni has been set to 5873
[    0.588971] Block layer SCSI generic (bsg) driver version 0.4
loaded (major 253)
[    0.588976] io scheduler noop registered
[    0.588978] io scheduler deadline registered
[    0.589015] io scheduler cfq registered (default)
[    0.589137] pcieport 0000:00:1c.0: setting latency timer to 64
[    0.589181]   alloc irq_desc for 40 on node -1
[    0.589183]   alloc kstat_irqs on node -1
[    0.589197] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[    0.589298] pcieport 0000:00:1c.1: setting latency timer to 64
[    0.589339]   alloc irq_desc for 41 on node -1
[    0.589341]   alloc kstat_irqs on node -1
[    0.589349] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[    0.589445] pcieport 0000:00:1c.2: setting latency timer to 64
[    0.589485] Freeing initrd memory: 10748k freed
[    0.589487]   alloc irq_desc for 42 on node -1
[    0.589489]   alloc kstat_irqs on node -1
[    0.589497] pcieport 0000:00:1c.2: irq 42 for MSI/MSI-X
[    0.589599] pcieport 0000:00:1c.3: setting latency timer to 64
[    0.589643]   alloc irq_desc for 43 on node -1
[    0.589645]   alloc kstat_irqs on node -1
[    0.589654] pcieport 0000:00:1c.3: irq 43 for MSI/MSI-X
[    0.589755] pcieport 0000:00:1c.4: setting latency timer to 64
[    0.589798]   alloc irq_desc for 44 on node -1
[    0.589800]   alloc kstat_irqs on node -1
[    0.589809] pcieport 0000:00:1c.4: irq 44 for MSI/MSI-X
[    0.589926] pcieport 0000:00:1c.5: setting latency timer to 64
[    0.589970]   alloc irq_desc for 45 on node -1
[    0.589972]   alloc kstat_irqs on node -1
[    0.589981] pcieport 0000:00:1c.5: irq 45 for MSI/MSI-X
[    0.590121] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.590177] Firmware did not grant requested _OSC control
[    0.590195] Firmware did not grant requested _OSC control
[    0.590206] Firmware did not grant requested _OSC control
[    0.590217] Firmware did not grant requested _OSC control
[    0.590228] Firmware did not grant requested _OSC control
[    0.590238] Firmware did not grant requested _OSC control
[    0.590268] Firmware did not grant requested _OSC control
[    0.590278] Firmware did not grant requested _OSC control
[    0.590288] Firmware did not grant requested _OSC control
[    0.590298] Firmware did not grant requested _OSC control
[    0.590309] Firmware did not grant requested _OSC control
[    0.590318] Firmware did not grant requested _OSC control
[    0.590328] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.590464] intel_idle: MWAIT substates: 0x22220
[    0.590467] intel_idle: does not run on family 6 model 23
[    0.591249] ACPI: AC Adapter [ACAD] (on-line)
[    0.591423] input: Power Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.591431] ACPI: Power Button [PWRB]
[    0.591484] input: Lid Switch as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
[    0.591875] ACPI: Lid Switch [LID0]
[    0.591930] input: Sleep Button as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    0.591934] ACPI: Sleep Button [SLPB]
[    0.592023] input: Power Button as
/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[    0.592026] ACPI: Power Button [PWRF]
[    0.592578] ACPI: acpi_idle registered with cpuidle
[    0.595151] Monitor-Mwait will be used to enter C-1 state
[    0.595186] Monitor-Mwait will be used to enter C-2 state
[    0.595192] Marking TSC unstable due to TSC halts in idle
[    0.595543] Switching to clocksource hpet
[    0.600767] [Firmware Bug]: Invalid critical threshold (0)
[    0.601637] thermal LNXTHERM:01: registered as thermal_zone0
[    0.601646] ACPI: Thermal Zone [TZ01] (54 C)
[    0.601730] ERST: Table is not found!
[    0.602115] Linux agpgart interface v0.103
[    0.602142] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.603775] brd: module loaded
[    0.604398] loop: module loaded
[    0.604865] Fixed MDIO Bus: probed
[    0.604897] PPP generic driver version 2.4.2
[    0.604929] tun: Universal TUN/TAP device driver, 1.6
[    0.604931] tun: (C) 1999-2004 Max Krasnyansky <maxk en qualcomm.com>
[    0.605010] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.605034] ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[    0.605049] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[    0.605053] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    0.605090] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned
bus number 1
[    0.605121] ehci_hcd 0000:00:1a.7: debug port 1
[    0.608999] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[    0.609018] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xdc705c00
[    0.626655] ACPI: Battery Slot [BAT0] (battery present)
[    0.631263] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[    0.631369] hub 1-0:1.0: USB hub found
[    0.631374] hub 1-0:1.0: 4 ports detected
[    0.631444]   alloc irq_desc for 20 on node -1
[    0.631446]   alloc kstat_irqs on node -1
[    0.631453] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.631466] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[    0.631470] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    0.631513] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned
bus number 2
[    0.631542] ehci_hcd 0000:00:1d.7: debug port 1
[    0.635428] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[    0.635442] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xdc705800
[    0.651265] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[    0.651367] hub 2-0:1.0: USB hub found
[    0.651371] hub 2-0:1.0: 8 ports detected
[    0.651448] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.651462] uhci_hcd: USB Universal Host Controller Interface driver
[    0.651511] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[    0.651519] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[    0.651523] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    0.651557] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned
bus number 3
[    0.651592] uhci_hcd 0000:00:1a.0: irq 16, io base 0x000090e0
[    0.651708] hub 3-0:1.0: USB hub found
[    0.651712] hub 3-0:1.0: 2 ports detected
[    0.651773]   alloc irq_desc for 21 on node -1
[    0.651776]   alloc kstat_irqs on node -1
[    0.651780] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[    0.651789] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[    0.651792] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    0.651824] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned
bus number 4
[    0.651863] uhci_hcd 0000:00:1a.1: irq 21, io base 0x000090c0
[    0.651978] hub 4-0:1.0: USB hub found
[    0.651982] hub 4-0:1.0: 2 ports detected
[    0.652046] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
[    0.652052] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[    0.652055] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    0.652087] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned
bus number 5
[    0.652113] uhci_hcd 0000:00:1d.0: irq 20, io base 0x000090a0
[    0.652234] hub 5-0:1.0: USB hub found
[    0.652238] hub 5-0:1.0: 2 ports detected
[    0.652297] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.652303] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[    0.652307] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    0.652341] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned
bus number 6
[    0.652366] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009080
[    0.652484] hub 6-0:1.0: USB hub found
[    0.652489] hub 6-0:1.0: 2 ports detected
[    0.652550] uhci_hcd 0000:00:1d.2: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[    0.652556] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[    0.652560] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    0.652590] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned
bus number 7
[    0.652618] uhci_hcd 0000:00:1d.2: irq 16, io base 0x00009060
[    0.652729] hub 7-0:1.0: USB hub found
[    0.652733] hub 7-0:1.0: 2 ports detected
[    0.652794] uhci_hcd 0000:00:1d.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[    0.652800] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[    0.652804] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[    0.652835] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned
bus number 8
[    0.652869] uhci_hcd 0000:00:1d.3: irq 18, io base 0x00009040
[    0.652977] hub 8-0:1.0: USB hub found
[    0.652981] hub 8-0:1.0: 2 ports detected
[    0.653097] PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:MOUE] at
0x60,0x64 irq 1,12
[    0.674841] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.674849] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.674910] mice: PS/2 mouse device common for all mice
[    0.675055] rtc_cmos 00:04: RTC can wake from S4
[    0.675090] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.675120] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[    0.675212] device-mapper: uevent: version 1.0.3
[    0.675295] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05)
initialised: dm-devel en redhat.com
[    0.675356] device-mapper: multipath: version 1.1.1 loaded
[    0.675358] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.675548] cpuidle: using governor ladder
[    0.676238] cpuidle: using governor menu
[    0.676504] TCP cubic registered
[    0.676627] NET: Registered protocol family 10
[    0.676986] lo: Disabled Privacy Extensions
[    0.677191] NET: Registered protocol family 17
[    0.677851] PM: Resume from disk failed.
[    0.677863] registered taskstats version 1
[    0.678402]   Magic number: 15:898:389
[    0.678407] usb usb7: hash matches
[    0.678431] pci_express 0000:00:1c.4:pcie04: hash matches
[    0.678523] rtc_cmos 00:04: setting system clock to 2011-02-04
17:21:13 UTC (1296840073)
[    0.678526] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.678528] EDD information not available.
[    0.678647] Freeing unused kernel memory: 908k freed
[    0.678968] Write protecting the kernel read-only data: 10240k
[    0.679191] Freeing unused kernel memory: 412k freed
[    0.679489] Freeing unused kernel memory: 1644k freed
[    0.695664] udev[79]: starting version 163
[    0.700902] input: AT Translated Set 2 keyboard as
/devices/platform/i8042/serio0/input/input4
[    0.768295] ahci 0000:00:1f.2: version 3.0
[    0.768315] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[    0.768359]   alloc irq_desc for 46 on node -1
[    0.768361]   alloc kstat_irqs on node -1
[    0.768373] ahci 0000:00:1f.2: irq 46 for MSI/MSI-X
[    0.768389] ahci 0000:00:1f.2: BIOS update required for suspend/resume
[    0.768458] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3
Gbps 0x33 impl SATA mode
[    0.768462] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led
clo pmp pio slum part ccc ems sxs
[    0.768468] ahci 0000:00:1f.2: setting latency timer to 64
[    0.792491] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    0.792520] r8169 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[    0.792572] r8169 0000:03:00.0: setting latency timer to 64
[    0.792625]   alloc irq_desc for 47 on node -1
[    0.792627]   alloc kstat_irqs on node -1
[    0.792644] r8169 0000:03:00.0: irq 47 for MSI/MSI-X
[    0.793172] r8169 0000:03:00.0: eth0: RTL8102e at
0xffffc900050c4000, 00:23:8b:af:56:0e, XID 14a00000 IRQ 47
[    0.832669] scsi0 : ahci
[    0.841221] scsi1 : ahci
[    0.841506] scsi2 : ahci
[    0.841596] scsi3 : ahci
[    0.841684] scsi4 : ahci
[    0.841771] scsi5 : ahci
[    0.841982] ata1: SATA max UDMA/133 abar m2048 en 0xdc705000 port
0xdc705100 irq 46
[    0.841986] ata2: SATA max UDMA/133 abar m2048 en 0xdc705000 port
0xdc705180 irq 46
[    0.841988] ata3: DUMMY
[    0.841990] ata4: DUMMY
[    0.841993] ata5: SATA max UDMA/133 abar m2048 en 0xdc705000 port
0xdc705300 irq 46
[    0.841996] ata6: SATA max UDMA/133 abar m2048 en 0xdc705000 port
0xdc705380 irq 46
[    0.950099] usb 1-1: new high speed USB device using ehci_hcd and address 2
[    1.122740] Initializing USB Mass Storage driver...
[    1.122856] scsi6 : usb-storage 1-1:1.0
[    1.122938] usbcore: registered new interface driver usb-storage
[    1.122940] USB Mass Storage support registered.
[    1.190105] ata5: SATA link down (SStatus 0 SControl 300)
[    1.191349] ata6: SATA link down (SStatus 0 SControl 300)
[    1.230127] usb 1-4: new high speed USB device using ehci_hcd and address 3
[    1.385307] scsi7 : usb-storage 1-4:1.3
[    1.385866] scsi8 : usb-storage 1-4:1.4
[    1.390060] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.390085] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    1.391836] ata1.00: ATA-8: ST9250320AS, HP07, max UDMA/100
[    1.391842] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    1.393919] ata1.00: configured for UDMA/100
[    1.409564] ata2.00: ATAPI: TSSTcorp CDDVDW TS-L633M, 0200, max UDMA/100
[    1.410227] scsi 0:0:0:0: Direct-Access     ATA      ST9250320AS
  HP07 PQ: 0 ANSI: 5
[    1.410390] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.410442] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks:
(250 GB/232 GiB)
[    1.410525] sd 0:0:0:0: [sda] Write Protect is off
[    1.410528] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    1.410552] sd 0:0:0:0: [sda] Write cache: enabled, read cache:
enabled, doesn't support DPO or FUA
[    1.410729]  sda:
[    1.427876] ata2.00: configured for UDMA/100
[    1.443102] scsi 1:0:0:0: CD-ROM            TSSTcorp CDDVDW
TS-L633M  0200 PQ: 0 ANSI: 5
[    1.452142] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw
xa/form2 cdda tray
[    1.452147] Uniform CD-ROM driver Revision: 3.20
[    1.452283] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    1.452338] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.471375]  sda1 sda2 sda3 sda4 < sda5 sda6 >
[    1.525234] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.560126] usb 2-4: new high speed USB device using ehci_hcd and address 3
[    2.021347] usb 5-2: new low speed USB device using uhci_hcd and address 2
[    2.122398] scsi 6:0:0:0: Direct-Access     Generic- Multi-Card
  1.00 PQ: 0 ANSI: 0 CCS
[    2.123099] sd 6:0:0:0: Attached scsi generic sg2 type 0
[    2.204684] EXT4-fs (sda5): mounted filesystem with ordered data
mode. Opts: (null)
[    2.391368] scsi 7:0:0:0: CD-ROM            HUAWEI   Mass Storage
  2.31 PQ: 0 ANSI: 2
[    2.391375] scsi 8:0:0:0: Direct-Access     HUAWEI   SD Storage
  2.31 PQ: 0 ANSI: 2
[    2.397079] sr1: scsi-1 drive
[    2.397198] sr 7:0:0:0: Attached scsi CD-ROM sr1
[    2.397259] sr 7:0:0:0: Attached scsi generic sg3 type 5
[    2.397433] sd 8:0:0:0: Attached scsi generic sg4 type 0
[    2.400477] sd 8:0:0:0: [sdc] Attached SCSI removable disk
[    3.122463] sd 6:0:0:0: [sdb] 7745536 512-byte logical blocks:
(3.96 GB/3.69 GiB)
[    3.123225] sd 6:0:0:0: [sdb] Write Protect is off
[    3.123230] sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00
[    3.123235] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.125576] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.125582]  sdb: sdb1
[    3.128193] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[    3.128197] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[   19.441626] udev[402]: starting version 163
[   19.517863] lp: driver loaded but no devices found
[   19.528001] Adding 1198076k swap on /dev/sda6.  Priority:-1
extents:1 across:1198076k
[   19.574239] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[   19.575687] agpgart-intel 0000:00:00.0: detected 65532K stolen
memory, trimming to 32768K
[   19.657104] lib80211: common routines for IEEE802.11 drivers
[   19.657108] lib80211_crypt: registered algorithm 'NULL'
[   19.773406] wl: module license 'MIXED/Proprietary' taints kernel.
[   19.773410] Disabling lock debugging due to kernel taint
[   19.779216] lirc_dev: IR Remote Control driver registered, major 250
[   19.779332] lirc_ene0100: module is from the staging directory, the
quality is unknown, you have been warned.
[   19.784864] usbcore: registered new interface driver cdc_ether
[   19.796356] type=1400 audit(1296850892.603:2): apparmor="STATUS"
operation="profile_load" name="/sbin/dhclient3" pid=626
comm="apparmor_parser"
[   19.797070] type=1400 audit(1296850892.603:3): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=626
comm="apparmor_parser"
[   19.797454] type=1400 audit(1296850892.603:4): apparmor="STATUS"
operation="profile_load"
name="/usr/lib/connman/scripts/dhclient-script" pid=626
comm="apparmor_parser"
[   19.819330] usb 1-4: bad CDC descriptors
[   19.819344] usb 1-4: bad CDC descriptors
[   19.819353] usb 1-4: bad CDC descriptors
[   19.823204] lis3lv02d: laptop model unknown, using default axes configuration
[   19.823425] usbcore: registered new interface driver rndis_host
[   19.825638] wl 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   19.825647] wl 0000:02:00.0: setting latency timer to 64
[   19.846623] enecir 00:0a: lirc_dev: driver enecir registered at minor = 0
[   19.846692] enecir: KB3926C detected, driver support is not complete!
[   19.846695] enecir: chip is 0x3926 - 0x00, 0xc0
[   19.846702] enecir: hardware features:
[   19.846704] enecir: learning and tx off, gpio40_learn off, fan_in off
[   19.846706] enecir: driver has been succesfully loaded
[   19.860446] lis3lv02d: 8 bits sensor found
[   19.874623] usbcore: registered new interface driver hiddev
[   19.896970] input: HP WMI hotkeys as /devices/virtual/input/input5
[   19.903252] input: HID Keyboard 2.4G Receiver as
/devices/pci0000:00/0000:00:1d.0/usb5/5-2/5-2:1.0/input/input6
[   19.903542] generic-usb 0003:1D57:B2B1.0001: input,hidraw0: USB HID
v1.00 Mouse [HID Keyboard 2.4G Receiver] on usb-0000:00:1d.0-2/input0
[   19.903832] usbcore: registered new interface driver usbhid
[   19.903835] usbhid: USB HID core driver
[   19.919002] Linux video capture interface: v2.00
[   19.937953] [drm] Initialized drm 1.1.0 20060810
[   19.942963] uvcvideo: Found UVC 1.00 device HP Webcam (064e:c107)
[   19.949158] cfg80211: Calling CRDA to update world regulatory domain
[   19.960485] input: HP Webcam as
/devices/pci0000:00/0000:00:1d.7/usb2/2-4/2-4:1.0/input/input7
[   19.960546] usbcore: registered new interface driver uvcvideo
[   19.960548] USB Video Class driver (v0.1.0)
[   19.981818] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[   19.990690] usb 1-4: bad CDC descriptors
[   20.000899] usb 1-4: bad CDC descriptors
[   20.012438] cfg80211: World regulatory domain updated:
[   20.012441]     (start_freq - end_freq @ bandwidth),
(max_antenna_gain, max_eirp)
[   20.012445]     (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.012448]     (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.012451]     (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   20.012453]     (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.012456]     (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   20.015563] usb 1-4: bad CDC descriptors
[   20.015625] usbcore: registered new interface driver rndis_wlan
[   20.028076] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[   20.028082] i915 0000:00:02.0: setting latency timer to 64
[   20.038651] lib80211_crypt: registered algorithm 'TKIP'
[   20.038846] eth1: Broadcom BCM432b 802.11 Hybrid Wireless
Controller 5.60.48.36
[   20.041740] input: ST LIS3LV02DL Accelerometer as
/devices/platform/lis3lv02d/input/input8
[   20.041860] Registered led device: hp::hddprotect
[   20.041879] lis3lv02d driver loaded.
[   20.085535] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro
[   20.126975] [drm] detected 63M stolen memory, trimming to 32M
[   20.127057]   alloc irq_desc for 48 on node -1
[   20.127060]   alloc kstat_irqs on node -1
[   20.127072] i915 0000:00:02.0: irq 48 for MSI/MSI-X
[   20.127089] [drm] set up 32M of stolen space
[   20.127269] [drm:init_ring_common] *ERROR* render ring head not
reset to zero ctl 00000000 head 02001000 tail 00000000 start 02001000
[   20.127322] [drm:init_ring_common] *ERROR* render ring head forced
to zero ctl 00000000 head 00000000 tail 00000000 start 02001000
[   20.245082] vgaarb: device changed decodes:
PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[   20.556806] type=1400 audit(1296850893.363:5): apparmor="STATUS"
operation="profile_load" name="/usr/share/gdm/guest-session/Xsession"
pid=964 comm="apparmor_parser"
[   20.559360] type=1400 audit(1296850893.363:6): apparmor="STATUS"
operation="profile_replace" name="/sbin/dhclient3" pid=965
comm="apparmor_parser"
[   20.560167] type=1400 audit(1296850893.363:7): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=965
comm="apparmor_parser"
[   20.560553] type=1400 audit(1296850893.363:8): apparmor="STATUS"
operation="profile_replace"
name="/usr/lib/connman/scripts/dhclient-script" pid=965
comm="apparmor_parser"
[   20.574096] type=1400 audit(1296850893.383:9): apparmor="STATUS"
operation="profile_load" name="/usr/bin/evince" pid=967
comm="apparmor_parser"
[   20.582542] type=1400 audit(1296850893.393:10): apparmor="STATUS"
operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" pid=970
comm="apparmor_parser"
[   20.583412] type=1400 audit(1296850893.393:11): apparmor="STATUS"
operation="profile_load" name="/usr/sbin/cupsd" pid=970
comm="apparmor_parser"
[   20.778561] Synaptics Touchpad, model: 1, fw: 6.5, id: 0x1c0b1,
caps: 0xa04751/0xa00000/0x0
[   20.780019] Skipping EDID probe due to cached edid
[   20.836085] r8169 0000:03:00.0: eth0: link down
[   20.836600] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   20.863991] input: SynPS/2 Synaptics TouchPad as
/devices/platform/i8042/serio1/input/input9
[   21.340915] Console: switching to colour frame buffer device 160x50
[   21.343805] fb0: inteldrmfb frame buffer device
[   21.343807] drm: registered panic notifier
[   21.343810] Slow work thread pool: Starting up
[   21.343856] Slow work thread pool: Ready
[   21.355301] acpi device:02: registered as cooling_device2
[   21.355642] input: Video Bus as
/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input10
[   21.355711] ACPI: Video Device [OVGA] (multi-head: yes  rom: no  post: no)
[   21.355793] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[   21.355995]   alloc irq_desc for 22 on node -1
[   21.355998]   alloc kstat_irqs on node -1
[   21.356007] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level,
low) -> IRQ 22
[   21.356063]   alloc irq_desc for 49 on node -1
[   21.356065]   alloc kstat_irqs on node -1
[   21.356075] HDA Intel 0000:00:1b.0: irq 49 for MSI/MSI-X
[   21.356108] HDA Intel 0000:00:1b.0: setting latency timer to 64
[   21.431307] Skipping EDID probe due to cached edid
[   21.550432] input: HDA Intel Mic at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[   21.550526] input: HDA Intel Mic at Sep UNKNOWN Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[   21.550589] input: HDA Intel HP Out at Ext Front Jack as
/devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[   21.941314] Skipping EDID probe due to cached edid
[   21.991350] Skipping EDID probe due to cached edid
[   22.002415] ppdev: user-space parallel port driver
[   23.070044] Skipping EDID probe due to cached edid
[   23.129312] Skipping EDID probe due to cached edid
[   23.221318] Skipping EDID probe due to cached edid
[   23.270025] Skipping EDID probe due to cached edid
[   23.303441] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   24.435605] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0
[   31.710050] Skipping EDID probe due to cached edid
[   31.760031] Skipping EDID probe due to cached edid
[   31.813588] Skipping EDID probe due to cached edid
[   31.861285] Skipping EDID probe due to cached edid
[   32.220095] Skipping EDID probe due to cached edid
[   32.451422] Skipping EDID probe due to cached edid
[   33.719046] ISO 9660 Extensions: Microsoft Joliet Level 1
[   33.854181] ISOFS: changing to secondary root
[   37.401322] Skipping EDID probe due to cached edid
[  602.910593] atkbd serio0: Unknown key pressed (translated set 2,
code 0x94 on isa0060/serio0).
[  602.910599] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[  602.918985] atkbd serio0: Unknown key released (translated set 2,
code 0x94 on isa0060/serio0).
[  602.918991] atkbd serio0: Use 'setkeycodes e014 <keycode>' to make it known.
[  603.621273] usb 7-2: new full speed USB device using uhci_hcd and address 2
[  603.828929] Bluetooth: Core ver 2.15
[  603.828955] NET: Registered protocol family 31
[  603.828957] Bluetooth: HCI device and connection manager initialized
[  603.828960] Bluetooth: HCI socket layer initialized
[  603.833890] Bluetooth: Generic Bluetooth USB driver ver 0.6
[  603.835581] usbcore: registered new interface driver btusb
[  603.847716] Bluetooth: L2CAP ver 2.14
[  603.847719] Bluetooth: L2CAP socket layer initialized
[  603.853389] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[  603.853393] Bluetooth: BNEP filters: protocol multicast
[  603.858451] Bluetooth: SCO (Voice Link) ver 0.6
[  603.858455] Bluetooth: SCO socket layer initialized
[  603.973711] Bluetooth: RFCOMM TTY layer initialized
[  603.973721] Bluetooth: RFCOMM socket layer initialized
[  603.973724] Bluetooth: RFCOMM ver 1.11
[  613.990013] eth1: no IPv6 routers present
alejandro en alejandro-HP-Pavilion-dv5-Notebook-PC:~$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 002: ID 03f0:171d Hewlett-Packard Wireless (Bluetooth +
WLAN) Interface [Integrated Module]
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 1d57:b2b1
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 003: ID 064e:c107 Suyin Corp. HP webcam [dv6-1190en]
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 003: ID 12d1:1c05 Huawei Technologies Co., Ltd.
Bus 001 Device 002: ID 0bda:0158 Realtek Semiconductor Corp. USB 2.0
multicard reader
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
alejandro en alejandro-HP-Pavilion-dv5-Notebook-PC:~$

Espero sus comentarios.
-- 
Alejandro Bosch
Villa de las Rosas
Córdoba
Usuario Linux # 481236
Usuario Ubuntu # 27516



More information about the Ubuntu-ar mailing list