[ubuntu-ar] Sarg + Squid

Walter info at infoquil.com.ar
Wed Feb 11 13:08:44 GMT 2009


Ariel Gustavo escribió:
> Buenas, tengo una consulta haber si alguien me puede dar una mano, tengo
> instalado Squid, e instale desde los repositorios de Ubunto Sarg
> (*Squid*Analysis Report Generator), para analizar los logs de Squid.
>
> Configure el archivo sarg.conf que se encuentra en /etc/squid/, de dicho
> archivo configure el idioma a español, la ubicación del access.log en
> /var/log/squid/access.log, directorio temporal /tmp, directorio donde se
>
> generaran los informes /var/www/html/squid-reports.
> Cuando lo quiero ejecutar y pongo sarg, me muestra el siguiente error:
>
> *SARG: No se encontraron registros**
> SARG: Fin
>
> Ya estuve bastante tiempo googleando y no encontré o no supe comprender a
>
> que se debe dicho error, así que si alguien me tira una soga estaré muy
> agradecido.
>
> De onda les digo que no me interesa implementar ninguna otra herramienta
> para analizar los logs de Squid, ya que estuve viendo varias y esta me
>
> parece por lejos la mejor, les aviso de onda para que no me recomienden
> otras herramientas.
>
> Uso Ubuntu Server 8.0.4
>   
te envio mi sarg.conf (en este envio te borro algunas cosas que no estan 
habilitadas
y ademas para que el correo no sea tan extenso)
uso Ubuntu Server 7.10




# sarg.conf
#

#
language Spanish

# TAG:  access_log file
#       Where is the access.log file
#       sarg -l file
#


# TAG:    title
#     Especify the title for html page.
#
title "Squid User Access Reports"

# TAG:    font_face
#     Especify the font for html page.
#
font_face Tahoma,Verdana,Arial

# TAG:    header_color
#     Especify the header color
#
header_color darkblue

# TAG:    header_bgcolor
#     Especify the header bgcolor
#
header_bgcolor blanchedalmond

# TAG:    font_size
#     Especify the text font size
#
font_size 9px

# TAG:    header_font_size
#     Especify the header font size
#
#header_font_size 9px

# TAG:    title_font_size
#     Especify the title font size
#
#title_font_size 11px

# TAG:    background_color
# TAG:    background_color
#    Html page background color
#
background_color white

# TAG:    text_color
#    Html page text color
#
text_color #000000

# TAG:    text_bgcolor
#    Html page text background color
#
text_bgcolor lavender

# TAG:    title_color
#    Html page title color
#
title_color green


# TAG:  temporary_dir
#       Temporary directory name for work files
#       sarg -w dir
#
temporary_dir /tmp

# TAG:  output_dir
#       The reports will be saved in that directory
#       sarg -o dir
#
#output_dir /var/www/html/squid-reports

# TAG:  output_email
#       Email address to send the reports. If you use this tag, no html 
reports will be generated.
#       sarg -e email
#
output_email "tu_direccion_de_correo_o_usuario (aca tengo puesto solo el 
usuario, ejemplo:sistemas)" (sin comillas)

# TAG:  resolve_ip yes/no
#       Convert ip address to dns name
#       sarg -n
resolve_ip

# TAG:  user_ip yes/no
#       Use Ip Address instead userid in reports.
#       sarg -p
user_ip yes



# TAG:  exclude_users file
#       users within the file will be excluded from reports.
#       you can use indexonly to have only index.html file.
#
exclude_users /etc/squid/sarg.users

# TAG:  exclude_hosts file
#       Hosts, domains or subnets will be excluded from reports.
#
#       Eg.: 192.168.10.10 - exclude ip address only
#            192.168.10.0  - exclude full C class
#            s1.acme.foo   - exclude hostname only
#            acme.foo      - exclude full domain name
#
exclude_hosts /etc/squid/sarg.hosts

# TAG:  useragent_log file
#       useragent.log file patch to generate useragent report.
#
#useragent_log none

# TAG:  date_format
#       Date format in reports: e (European=dd/mm/yy), u 
(American=mm/dd/yy), w (Weekly=yy.ww)
#      
date_format u



# TAG: remove_temp_files yes
#      Remove temporary files: geral, usuarios, top, periodo from root 
report directory.
#
remove_temp_files yes

# TAG: index yes|no|only
#      Generate the main index.html.
#      only - generate only the main index.html
#

# TAG: index_tree date|file
#      How to generate the index.
#
index_tree file



# TAG: exclude_codes file
#      Ignore records with these codes. Eg.: NONE/400
#
exclude_codes /etc/squid/sarg.exclude_codes



# TAG: max_elapsed milliseconds
#      If elapsed time is recorded in log is greater than max_elapsed 
use 0 for elapsed time.
#      Use 0 for no checking
#
#max_elapsed 0
# 8 Hours
max_elapsed 28800000



# TAG: usertab filename
#      You can change the "userid" or the "ip address" to be a real user 
name on the reports.
#      Table syntax:
#         userid name   or   ip address name
#      Eg:
#        SirIsaac Isaac Newton
#        vinci Leonardo da Vinci
#        192.168.10.1 Karol Wojtyla
#     
#      Each line must be terminated with '\n'
#
usertab /etc/squid/sarg.usertab

# TAG: long_url yes|no
#      If yes, the full url is showed in report.
#      If no, only the site will be showed
#
#      YES option generate very big sort files and reports.
#
long_url yes

# TAG: date_time_by bytes|elap
#      Date/Time reports will use bytes or elapsed time?
#
date_time_by elap

# TAG: charset name
#      ISO 8859 is a full series of 10 standardized multilingual 
single-byte coded (8bit)
#      graphic character sets for writing in alphabetic languages
#      You can use the following charsets:
#        Latin1         - West European
#        Latin2         - East European
#        Latin3         - South European
#        Latin4         - North European
#        Cyrillic
#        Arabic
#        Greek
#        Hebrew
#        Latin5         - Turkish
#        Latin6
#        Windows-1251
#        Koi8-r
#
charset Latin1

# TAG: user_invalid_char "&/"
#      Records that contain invalid characters in userid will be ignored 
by Sarg.
#
#user_invalid_char "&/"

# TAG: privacy yes|no
#      privacy_string "***.***.***.***"
#      privacy_string_color blue
#      In some countries the sysadm cannot see the visited sites by a 
restrictive law.
#      Using privacy yes the visited url will be changes by 
privacy_string and the link
#      will be removed from reports.
#
#privacy no
privacy no
#privacy_string "***.***.***.***"
#privacy_string_color blue


# TAG: show_successful_message yes|no
#      Shows "Successful report generated on dir" at end of process.
#
show_successful_message no

# TAG: show_read_statistics yes|no
#      Shows some reading statistics.
#
show_read_statistics no

# TAG: topuser_fields
#      Which fields must be in Topuser report.
#
topuser_fields NUM DATE_TIME USERID CONNECT BYTES %BYTES IN-CACHE-OUT 
USED_TIME MILISEC %TIME TOTAL AVERAGE

# TAG: user_report_fields
#      Which fields must be in User report.
#
user_report_fields CONNECT BYTES %BYTES IN-CACHE-OUT USED_TIME MILISEC 
%TIME TOTAL AVERAGE


# TAG: site_user_time_date_type list|table
#      generate reports for site_user_time_date in list or table format
#
site_user_time_date_type table



# TAG: datafile_url ip|name
#      Saves the URL as ip or name in datafile
#
#datafile ip


# TAG: block_it module_url
#     This tag allow you to pass urls from user reports to a cgi or php 
module,
#     to be blocked by some Squid acl
#
#     Eg.: block_it /sarg-php/sarg-block-it.php
#     sarg-block-it is a php that will append a url to a flat file.
#     You must change /var/www/html/sarg-php/sarg-block-it to point to 
your file
#     in $filename variable, and chown to a httpd owner.
#
#     sarg will pass http://module_url?url=url
#
#block_it none


# TAG: download_suffix "suffix,suffix,...,suffix"
#    file suffix to be considered as "download" in Download report.
#    Use 'none' to disable.   
#
download_suffix 
"zip,arj,bzip,gz,ace,doc,iso,adt,bin,cab,com,dot,drv$,lha,lzh,mdb,mso,ppt,rtf,src,shs,sys,exe,dll,mp3,avi,mpg,mpeg"

# TAG: ulimit n
#    The maximum number of open file descriptors to avoid "Too many open 
files" error message.
#    You need to run sarg as root to use ulimit tag.
#
#ulimit 20000


# TAG: byte_cost value no_cost_limit
#      Cost per byte.
#      Eg. byte_cost 0.01 100000000
#           per byte cost      = 0.01
#           bytes with no cost = 100 Mb
#      0 = disable
#
# byte_cost 0.01 50000000
mail_utility mailx
access_log /var/log/squid/access.log

-- 
Walter
www.infoquil.com.ar




More information about the Ubuntu-ar mailing list