Classic image not working after upgrade on RPI 3

[Taihsiang Ho]

Hi, Sergey,

Would you please make sure the following packages are also updated by

dpkg -l | grep -e uboot -e flash-kernel -e firmware -e linux-raspi2 -e
u-boot


And you should get the package information like this comment
https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1636838/comments/20

Cheers,
Taihsiang

2016-12-22 2:48 GMT+08:00 Sergey Borovkov <serge.borovkov at gmail.com>:

> Ok, so I enabled xenial proposed.
>
> Got following versions:
> Setting up linux-firmware-raspi2 (1.20161020-0ubuntu1~0.1) ...
> Setting up linux-raspi2-headers-4.4.0-1038 (4.4.0-1038.45) ...
> Setting up linux-headers-4.4.0-1038-raspi2 (4.4.0-1038.45) ...
> Setting up linux-image-raspi2 (4.4.0.1038.37) ...
> Setting up linux-headers-raspi2 (4.4.0.1038.37) ...
> Setting up linux-raspi2 (4.4.0.1038.37) ...
> Setting up python3-cryptography (1.2.3-1ubuntu0.1) ...
> Setting up python3-software-properties (0.96.20.5) ...
> Setting up software-properties-common (0.96.20.5) ...
>
>
> And again image does not boot after restart. Stuck in "starting kernel".
>
> On 21 December 2016 at 19:20, Chris Wayne <chris.wayne at canonical.com>
> wrote:
>
>> Hi Sergey,
>>
>> Which image are you using?  Is it possible this is the same as this bug:
>> https://bugs.launchpad.net/ubuntu/+source/linux-raspi2/+bug/1636838
>> (which should now be fixed).  Perhaps you could try the PPA listed in that
>> bug? (Note that this is technically a bug for rpi2, but I *believe* they
>> may share the same kernel)
>>
>> Thanks
>> Chris
>>
>> On Wed, Dec 21, 2016 at 9:57 AM, Sergey Borovkov <
>> serge.borovkov at gmail.com> wrote:
>>
>>> Hi. After I did apt upgrade on classic image I can't boot my RPI
>>> anymore. It's stuck on 'Starting kernel...'.
>>> Tried different SD cards (on the second one I flashed out new classic
>>> image and did upgrade as well) with the same result.
>>>
>>> --
>>> Snapcraft mailing list
>>> Snapcraft at lists.snapcraft.io
>>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>>> an/listinfo/snapcraft
>>>
>>>
>>
>> --
>> Snapcraft mailing list
>> Snapcraft at lists.snapcraft.io
>> Modify settings or unsubscribe at: https://lists.ubuntu.com/mailm
>> an/listinfo/snapcraft
>>
>>
>
> --
> Snapcraft mailing list
> Snapcraft at lists.snapcraft.io
> Modify settings or unsubscribe at: https://lists.ubuntu.com/
> mailman/listinfo/snapcraft
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://lists.ubuntu.com/archives/snapcraft/attachments/20161222/21cec32b/attachment-0001.html>