[ubuntu/raring-proposed] hdparm 9.42-1ubuntu1 (Accepted)

Steve Langasek steve.langasek at ubuntu.com
Sun Oct 28 20:56:32 UTC 2012


hdparm (9.42-1ubuntu1) raring; urgency=low

  * Merge from Debian unstable:
    + Adds support to the udev script for hdparm.conf stanzas that point at
      a symlink of the device rather than the device itself.  LP: #222458.
  * Remaining changes:
    + debian/control:
      - Add Breaks on old udev
      - Do not depend on lsb-base (we no longer use init script)
    + debian/hpdarm.dirs:
      - Drop unused /etc/udev/rules.d
    + debian/rules, debian/hdparm.udev-script:
      - Install udev-script, drop init file stuff
    + debian/rules:
      - Install a suspend.d symlink to also call the pm-utils hook on
        resuming.
  * Dropped changes, included in Debian:
    + debian/control:
      - Add Homepage
      - cdbs build-dependency bump
      - Recommend powermgmt-base
    + debian/rules:
      - Pass --priority=85 to dh_installudev
    + debian/hdparm.postinst, debian/rules: move udev rules to /lib/udev
    + Addition of debian/95hdparm-apm and debian/hdparm-functions
    + Add a new option to hdparm.conf, apm_battery, which is used in place of
      apm when we detect that we're on battery power.
    + debian/hdparm.udev-script, debian/hdparm.init:
      - only use the 'apm' setting when we're not on battery; when we are on
        battery, apply the separate 'apm_battery' setting.
      - Don't call hdparm -f for every drive
      - don't call sync
    + debian/hdparm.install:
      - Use hpdarm.udev instead of .rules
    + debian/hdparm.conf, debian/hdparm.conf.5: drop 'command_line' example
  * Dropped changes:
    - pm-utils Breaks/Replaces: Ubuntu-specific and no longer needed for
      upgrades.
    - adding lib/udev for our udev-script: dh_installudev takes care of this
      for us.
    - Remove broken symlink on upgrade: pre-lucid upgrades, no longer needed.
  * Don't trigger the udev rule on sd[a-z]*; yes, this means we aren't
    handling /dev/sdaa, but it also means we avoid spurious triggers on
    /dev/sda{1,2,...}

hdparm (9.42-1) unstable; urgency=low

  * New upstream release
  * Allow udev rule to process large numbers of devices (closes: #675624)
  * Changed hdparm-functions to allow links instead of devices in hdparm.conf.
  * Taken from Ubuntu:
    Set spindown policy back to -B128 instead of -B127. Too many drives
    misbehave too badly with this setting, possibly leading to drive failure.
    We should revisit this once we understand why people's drives are spinning
    back *up* so frequently (closes: #684241)

hdparm (9.39-1) unstable; urgency=low

  * New upstream version (closes: #602522, #631614, #639660)
  * Added myself to uploaders
  * Added Homepage field (closes: #533190, #545005)
  * Changed linking stage to not strip binary, otherwise the debug package
    would be empty
  * Renamed XC-Package-Type to Package-Type
  * No longer install idectl, that relies on options that were removed, and
    ultrabayd, that relies on idectl (closes: #511283)
  * Install UDEV rule to /lib/udev/rules.d (closes: #563762, #622568)
  * Bumped build dependency on debhelper for correct udev handling.
  * Install wiper.sh into its own subdirectory together with its README.txt
  * Recommend powermgmt-base
  * Thanks to Dmitry Smirnov <onlyjob at member.fsf.org>:
    + Added description to init file
    + Updated watch file to fetch from sourceforge
    + Clean up old rules from /etc/udev in postinst
  * Taken from Ubuntu:
    + pm-utils script 95-hdparm-apm:
      - run hdparm on wakeup (closes: #468307)
      - full integration with pm-utils (closes: #510676)
      - adjust hard drive APM settings (closes: #664041)
    + /lib/hdparm/hdparm-functions:
      -  prepare to replace our init script eventually
      -  special handling for Firewire/USB (closes: #654873)
    + hdparm.init:
      - only use the 'apm' setting when we're not on battery; when we are on
        battery, apply the separate 'apm_battery' setting.
      - Don't call hdparm -f for every drive; no clear rationale was ever given
        for doing this, and doing so slows down hard drive access at boot time.
      - also don't call sync... (closes: #546813)
    * hdparm.conf.5
  * hdparm.conf: added apm_battery, removed command_line example
  * Bumped Standards-Version to 3.9.3, no changes needed

Date: Wed, 24 Oct 2012 21:41:35 -0700
Changed-By: Steve Langasek <steve.langasek at ubuntu.com>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Signed-By: Adam Conrad <adconrad at 0c3.net>
https://launchpad.net/ubuntu/raring/+source/hdparm/9.42-1ubuntu1
-------------- next part --------------
Format: 1.8
Date: Wed, 24 Oct 2012 21:41:35 -0700
Source: hdparm
Binary: hdparm hdparm-dbg hdparm-udeb
Architecture: source
Version: 9.42-1ubuntu1
Distribution: raring
Urgency: low
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Steve Langasek <steve.langasek at ubuntu.com>
Description: 
 hdparm     - tune hard disk parameters for high performance
 hdparm-dbg - debug files for hdparm
 hdparm-udeb - tune hard disk parameters for high performance (udeb)
Closes: 468307 510676 511283 533190 545005 546813 563762 602522 622568 631614 639660 654873 664041 675624 684241
Launchpad-Bugs-Fixed: 222458
Changes: 
 hdparm (9.42-1ubuntu1) raring; urgency=low
 .
   * Merge from Debian unstable:
     + Adds support to the udev script for hdparm.conf stanzas that point at
       a symlink of the device rather than the device itself.  LP: #222458.
   * Remaining changes:
     + debian/control:
       - Add Breaks on old udev
       - Do not depend on lsb-base (we no longer use init script)
     + debian/hpdarm.dirs:
       - Drop unused /etc/udev/rules.d
     + debian/rules, debian/hdparm.udev-script:
       - Install udev-script, drop init file stuff
     + debian/rules:
       - Install a suspend.d symlink to also call the pm-utils hook on
         resuming.
   * Dropped changes, included in Debian:
     + debian/control:
       - Add Homepage
       - cdbs build-dependency bump
       - Recommend powermgmt-base
     + debian/rules:
       - Pass --priority=85 to dh_installudev
     + debian/hdparm.postinst, debian/rules: move udev rules to /lib/udev
     + Addition of debian/95hdparm-apm and debian/hdparm-functions
     + Add a new option to hdparm.conf, apm_battery, which is used in place of
       apm when we detect that we're on battery power.
     + debian/hdparm.udev-script, debian/hdparm.init:
       - only use the 'apm' setting when we're not on battery; when we are on
         battery, apply the separate 'apm_battery' setting.
       - Don't call hdparm -f for every drive
       - don't call sync
     + debian/hdparm.install:
       - Use hpdarm.udev instead of .rules
     + debian/hdparm.conf, debian/hdparm.conf.5: drop 'command_line' example
   * Dropped changes:
     - pm-utils Breaks/Replaces: Ubuntu-specific and no longer needed for
       upgrades.
     - adding lib/udev for our udev-script: dh_installudev takes care of this
       for us.
     - Remove broken symlink on upgrade: pre-lucid upgrades, no longer needed.
   * Don't trigger the udev rule on sd[a-z]*; yes, this means we aren't
     handling /dev/sdaa, but it also means we avoid spurious triggers on
     /dev/sda{1,2,...}
 .
 hdparm (9.42-1) unstable; urgency=low
 .
   * New upstream release
   * Allow udev rule to process large numbers of devices (closes: #675624)
   * Changed hdparm-functions to allow links instead of devices in hdparm.conf.
   * Taken from Ubuntu:
     Set spindown policy back to -B128 instead of -B127. Too many drives
     misbehave too badly with this setting, possibly leading to drive failure.
     We should revisit this once we understand why people's drives are spinning
     back *up* so frequently (closes: #684241)
 .
 hdparm (9.39-1) unstable; urgency=low
 .
   * New upstream version (closes: #602522, #631614, #639660)
   * Added myself to uploaders
   * Added Homepage field (closes: #533190, #545005)
   * Changed linking stage to not strip binary, otherwise the debug package
     would be empty
   * Renamed XC-Package-Type to Package-Type
   * No longer install idectl, that relies on options that were removed, and
     ultrabayd, that relies on idectl (closes: #511283)
   * Install UDEV rule to /lib/udev/rules.d (closes: #563762, #622568)
   * Bumped build dependency on debhelper for correct udev handling.
   * Install wiper.sh into its own subdirectory together with its README.txt
   * Recommend powermgmt-base
   * Thanks to Dmitry Smirnov <onlyjob at member.fsf.org>:
     + Added description to init file
     + Updated watch file to fetch from sourceforge
     + Clean up old rules from /etc/udev in postinst
   * Taken from Ubuntu:
     + pm-utils script 95-hdparm-apm:
       - run hdparm on wakeup (closes: #468307)
       - full integration with pm-utils (closes: #510676)
       - adjust hard drive APM settings (closes: #664041)
     + /lib/hdparm/hdparm-functions:
       -  prepare to replace our init script eventually
       -  special handling for Firewire/USB (closes: #654873)
     + hdparm.init:
       - only use the 'apm' setting when we're not on battery; when we are on
         battery, apply the separate 'apm_battery' setting.
       - Don't call hdparm -f for every drive; no clear rationale was ever given
         for doing this, and doing so slows down hard drive access at boot time.
       - also don't call sync... (closes: #546813)
     * hdparm.conf.5
   * hdparm.conf: added apm_battery, removed command_line example
   * Bumped Standards-Version to 3.9.3, no changes needed
Checksums-Sha1: 
 e8f214bf5d0ec3aaddead8a3db536fb291fccc6e 1956 hdparm_9.42-1ubuntu1.dsc
 0127c7360edef355e01241ac5390b976752c9d84 126941 hdparm_9.42.orig.tar.gz
 0941ef7f67ac795d00144446da3e67f085248d17 19503 hdparm_9.42-1ubuntu1.diff.gz
Checksums-Sha256: 
 658eea0db7e59491a8489115aff298d7359d9e5922e40edc37364387c00d8105 1956 hdparm_9.42-1ubuntu1.dsc
 e50f37819a7133dd5279dcd5b211de225f3f0b9112f086739b53111b21ac2132 126941 hdparm_9.42.orig.tar.gz
 81eada4c9b32cab5df8502558b792218cd1b553f0883673a05749e60932aa878 19503 hdparm_9.42-1ubuntu1.diff.gz
Files: 
 32739800f4fe45e36cc328a86242a327 1956 admin optional hdparm_9.42-1ubuntu1.dsc
 4cb5483a951e489d1e336c1a390692cb 126941 admin optional hdparm_9.42.orig.tar.gz
 425a10abfa0376c6704c6cb012657c08 19503 admin optional hdparm_9.42-1ubuntu1.diff.gz
Original-Maintainer: Stephen Gran <sgran at debian.org>


More information about the Raring-changes mailing list