[ubuntu/quantal] system-config-printer 1.3.8+20120201-0ubuntu10 (Accepted)
Till Kamppeter
till.kamppeter at gmail.com
Thu Jul 5 19:10:44 UTC 2012
system-config-printer (1.3.8+20120201-0ubuntu10) quantal; urgency=low
* debian/patches/33_udev-configure-printer-make-error-on-claiming-interface-0-non-fatal.patch,
debian/patches/33_udev-configure-printer-enhancements.patch:
Replaced patch on udev-configure-printer (Plug'n'Print via UDEV) to add
more enhancements:
- Use libusb 1.0.x instead of 0.1.x to determine the device ID when
the usblp kernel module is not attached to the device. libusb 0.1.x is
not maintained upstream any more.
- Do not trigger udev-configure-printer on the UDEV signal emitted by
the printer detection through the usblp kernel module any more. There
is already a UDEV signal on the detection of the corresponding
low-level USB device and through this one can also access all needed
information and this way we avoid the devices being detected twice,
triggering udev-configure-printer twice. Also the detaching and
re-attaching of the usblp kernel module by the new libusb-1.0-based
USB CUPS backend does not trigger udev-configure-printer any more.
- Gather all needed printer information through the UDEV entry of the
low-level USB devices, independent of the presence or absence of the
usblp kernel module. This way we do not need to handle the UDEV
signals of the usblp kernel module.
- When scanning the USB devices with libusb, do not seLect the correct
device only by the USB vendor and product IDs but also by the serial
number. There are many (older) Epson printers with the same USB vendor
and product IDs but different models with different IEEE-1284 device
IDs.
- Make error on claiming interface 0 non-fatal (from the old patch,
LP: #936155).
- Let actions on the print queue always be performed only once, even
if more than one of the URIs of the detected device matches a
particular print queue.
- Eliminate duplicate messages in the syslog.
* debian/control: Build-depend on libusb-1.0-0-dev instead of libusb-dev.
Date: Thu, 5 Jul 2012 19:00:00 +0200
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/quantal/+source/system-config-printer/1.3.8+20120201-0ubuntu10
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Thu, 5 Jul 2012 19:00:00 +0200
Source: system-config-printer
Binary: system-config-printer-common system-config-printer-udev system-config-printer-gnome python-cupshelpers
Architecture: source
Version: 1.3.8+20120201-0ubuntu10
Distribution: quantal
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Description:
python-cupshelpers - Python modules for printer configuration with CUPS
system-config-printer-common - Printer configuration GUI
system-config-printer-gnome - Printer configuration GUI
system-config-printer-udev - Printer auto-configuration facility based on udev
Launchpad-Bugs-Fixed: 936155
Changes:
system-config-printer (1.3.8+20120201-0ubuntu10) quantal; urgency=low
.
* debian/patches/33_udev-configure-printer-make-error-on-claiming-interface-0-non-fatal.patch,
debian/patches/33_udev-configure-printer-enhancements.patch:
Replaced patch on udev-configure-printer (Plug'n'Print via UDEV) to add
more enhancements:
- Use libusb 1.0.x instead of 0.1.x to determine the device ID when
the usblp kernel module is not attached to the device. libusb 0.1.x is
not maintained upstream any more.
- Do not trigger udev-configure-printer on the UDEV signal emitted by
the printer detection through the usblp kernel module any more. There
is already a UDEV signal on the detection of the corresponding
low-level USB device and through this one can also access all needed
information and this way we avoid the devices being detected twice,
triggering udev-configure-printer twice. Also the detaching and
re-attaching of the usblp kernel module by the new libusb-1.0-based
USB CUPS backend does not trigger udev-configure-printer any more.
- Gather all needed printer information through the UDEV entry of the
low-level USB devices, independent of the presence or absence of the
usblp kernel module. This way we do not need to handle the UDEV
signals of the usblp kernel module.
- When scanning the USB devices with libusb, do not seLect the correct
device only by the USB vendor and product IDs but also by the serial
number. There are many (older) Epson printers with the same USB vendor
and product IDs but different models with different IEEE-1284 device
IDs.
- Make error on claiming interface 0 non-fatal (from the old patch,
LP: #936155).
- Let actions on the print queue always be performed only once, even
if more than one of the URIs of the detected device matches a
particular print queue.
- Eliminate duplicate messages in the syslog.
* debian/control: Build-depend on libusb-1.0-0-dev instead of libusb-dev.
Checksums-Sha1:
380bb603d61b90d8af34aac664e5f98f4fa4a457 1715 system-config-printer_1.3.8+20120201-0ubuntu10.dsc
10bbb5933ee66f435d1c8bb1665d5cd932bc91fd 51301 system-config-printer_1.3.8+20120201-0ubuntu10.diff.gz
Checksums-Sha256:
7bcfb508030a23a99115308809318127cb4bd00b1e37c8a5dc0da2b7bd859280 1715 system-config-printer_1.3.8+20120201-0ubuntu10.dsc
b9ca6e43ca1ff059dfe366859fca6b15a275fa51ddaf006f32623173721fbbf4 51301 system-config-printer_1.3.8+20120201-0ubuntu10.diff.gz
Files:
7e564b4305e57b645be3ca7efcbcf3a4 1715 gnome optional system-config-printer_1.3.8+20120201-0ubuntu10.dsc
72f2de6e9c82a8511fe6b440c60b5165 51301 gnome optional system-config-printer_1.3.8+20120201-0ubuntu10.diff.gz
Original-Maintainer: Otavio Salvador <otavio at ossystems.com.br>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEARECAAYFAk/15Y8ACgkQTuVatl/cKEm9iwCgkzErVB5DMsr/1VXesS1tBWXk
A0oAoKSyRzFJOSs4yosSpmimfjmTvQGQ
=R4KC
-----END PGP SIGNATURE-----
More information about the Quantal-changes
mailing list