[ubuntu/precise] linux-ti-omap4 3.2.0-1404.6 (Accepted)

Paolo Pisati paolo.pisati at canonical.com
Thu Jan 19 14:20:40 UTC 2012


linux-ti-omap4 (3.2.0-1404.6) precise; urgency=low

  [ Paolo Pisati ]

  * SAUCE: fix <mach/omap4-common.h> -> "common.h" conversion
  * [Config] updateconfigs after rebase
  * rebased on Ubuntu-3.2.0-9.16
  * [Config] s/CONFIG_PREEMPT_VOLUNTARY=y/CONFIG_PREEMPT=y/
  * Tilt-tracking @ c39eb9613ca29beae72b89dbdbadc878a30c4c70

  [ Ubuntu: 3.2.0-9.16 ]

  * [Config] Enable numerous CONFIG_VIDEO_* cards on ARM
  * [Config] pull ARM sound modules =m
  * [Config] CONFIG_RTC_DRV_TEST is for testing only
  * [Config] CONFIG_USB_DUMMY_HCD is testing only
  * [Config] CONFIG_USB_FILE_STORAGE is deprecated
  * Revert "[Config] Temporarily disable CONFIG_CAN_TI_HECC on armel"
  * [Config] Enable CONFIG_HW_RANDOM_PASEMI=m
  * [Config] Enable CONFIG_MMC_TMIO=m
  * [Config] Enable CONFIG_MTD_NAND_FSL_ELBC=m
  * [Config] Enable CONFIG_ISI=m
  * [Config] Enable CONFIG_MMC=y
  * [Config] Enable CONFIG_LIRC_PARALLEL=m
  * [Config] Enable CONFIG_MAC_EMUMOUSEBTN=m
  * [Config] Enable CONFIG_CHR_DEV_SG=y
  * [Config] Enable CONFIG_GPIO_PCA953X=m
  * [Config] Enable CONFIG_GPIO_TWL4030=m
  * [Config] Enable CONFIG_INET_DIAG=m
  * [Config] Enable CONFIG_NLS_ISO8859_1=m
  * [Config] Enable CONFIG_NVRAM=m
  * [Config] Enable CONFIG_SLIP=m
  * [Config] Enable CONFIG_PC300TOO=m
  * [Config] Enable CONFIG_TUN=y
  * [Config] Enable CONFIG_NET_CLS_CGROUP=m
  * [Config] Enable CONFIG_THERMAL=y
  * [Config] Enable CONFIG_PPP=y
  * [Config] Enable CONFIG_PCI_STUB=m
  * Rebase to v3.2.1
  * [Config] Enable CONFIG_RTL8192E=m
  * [Config] Enable CONFIG_RTS5139=m
  * [Config] Make CONFIG_VIRTIO_(NET|BLK)=y
  * ARM: restart: add restart hook to machine_desc record
  * ARM: restart: allow platforms more flexibility specifying restart mode
  * ARM: restart: move reboot failure handing into machine_restart()
  * ARM: restart: remove argument to setup_mm_for_reboot()
  * ARM: 7159/1: OMAP: Introduce local common.h files
  * ARM: restart: only perform setup for restart when soft-restarting
  * ARM: 7189/1: OMAP3: Fix build break in cpuidle34xx.c because of irq
    function
  * ARM: idmap: populate identity map pgd at init time using .init.text
  * ARM: suspend: use idmap_pgd instead of suspend_pgd
  * ARM: proc-*.S: place cpu_reset functions into .idmap.text section
  * ARM: idmap: use idmap_pgd when setting up mm for reboot
  * ARM: head.S: only include __turn_mmu_on in the initial identity mapping
  * ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting
  * ARM: 7194/1: OMAP: Fix build after a merge between v3.2-rc4 and ARM
    restart changes
  * ARM: lib: add call_with_stack function for safely changing stack
  * ARM: reset: implement soft_restart for jumping to a physical address
  * ARM: stop: execute platform callback from cpu_stop code
  * ARM: kexec: use soft_restart for branching to the reboot buffer
  * ARM: restart: omap: use new restart hook
  * topdown mmap support
    - LP: #861296
  * Rebase to v3.2.1

  [ Ubuntu: 3.2.0-8.15 ]

  * [Config] Disable CONFIG_ACPI_PROCFS
  * Remove server from getabis
  * Temporarily disable module check
  * [Config] Disable CONFIG_MTD_TESTS
  * [Config] Disable CONFIG_X86_E_POWERSAVER
  * [Config] Set CONFIG_ARCNET=m
  * [Config] Enable CONFIG_ATM_DUMMY=m
  * [Config] Enable CONFIG_BLK_DEV_MD=y
  * ubuntu: fsam7400 select CHECK_SIGNATURE and depend on X86
  * [Config] Enable CONFIG_BLK_DEV_SD=y
  * [Config] Enable CONFIG_BLK_DEV_SR=y
  * [Config] Enable CONFIG_BLK_DEV_UB=m
  * [Config] Enable CONFIG_COPS=m
  * [Config] Enable CONFIG_DVB_USB_EC168=m
  * [Config] Enable CONFIG_ENC28J60=m
  * [Config] Enable CONFIG_FB_UVESA=m
  * [Config] Enable CONFIG_FB_ATY=m
  * [Config] Enable CONFIG_BROADCOM_PHY=y
  * [Config] Enable CONFIG_CICADA_PHY=y
  * [Config] Enable CONFIG_DAVICOM_PHY=y
  * [Config] Enable CONFIG_ICPLUS_PHY=y
  * [Config] Enable CONFIG_LSI_ET1011C_PHY=y
  * [Config] Enable CONFIG_LXT_PHY=y
  * [Config] Enable CONFIG_MARVELL_PHY=y
  * [Config] Enable CONFIG_NATIONAL_PHY=y
  * [Config] Enable CONFIG_QSEMI_PHY=y
  * [Config] Enable CONFIG_SMSC_PHY=y
  * [Config] Enable CONFIG_VITESSE_PHY=y
  * Add 3w-sas to scsi-modules
    - LP: #776542
  * SAUCE: ipv6: make the net.ipv6.conf.all.use_tempaddr sysctl propagate
    to interface settings
  * Revert "SAUCE: omap3: beagle: if rev unknown, assume xM revision C"
    - LP: #912199
  * Revert "SAUCE: omap3: beagle: detect new xM revision B"
    - LP: #912199
  * Revert "SAUCE: omap3: beaglexm: fix DVI initialization"
    - LP: #912199
  * Bluetooth: Add support for BCM20702A0 [0a5c:21e3]
    - LP: #906832

  [ Ubuntu: 3.2.0-8.14 ]

  * [Config] enable CONFIG_SND_USB_6FIRE
    - LP: #912197
  * rebase to mainline v3.2 final release
  * updateconfigs following rebase to v3.2 final
  * ubuntu: AUFS -- add BOM and automated update script
  * ubuntu: AUFS -- include the aufs_types.h file in linux-libc-headers
    - LP: #684666
  * ubuntu: AUFS -- update aufs-update to track new locations of headers
  * ubuntu: AUFS -- clean up the aufs updater and BOM
  * ubuntu: AUFS -- documentation on updating aufs2
  * ubuntu: AUFS -- aufs3-base.patch
  * ubuntu: AUFS -- aufs3-standalone.patch
  * ubuntu: AUFS -- fix undefined __devcgroup_inode_permission
  * ubuntu: AUFS -- fix undefined security_path_link
  * ubuntu: AUFS -- update to 4cf5db36bcd9748e8e7270022f295f84d1fc2245
  * ubuntu: AUFS -- updateconfigs following update
  * ubuntu: AUFS -- suppress benign plink warning messages
    - LP: #621195
  * ubuntu: AUFS -- enable in config and makefile
  * ubuntu: AUFS -- disable in favor of overlayfs
  * [Config] linux-virtual -- should include the extX modules
    - LP: #912308
  * SAUCE: eCryptfs: Improve statfs reporting
    - LP: #885744
  * rebase to upstream v3.2

  [ Ubuntu: 3.2.0-7.13 ]

  * rebase to upstream 3.2-rc7

  [ Ubuntu: 3.2.0-6.12 ]

  * rebase to upstream v3.2-rc6

  [ Ubuntu: 3.2.0-5.11 ]

  * enforcer -- allow arch and flavour predicates to take lists
  * enforcer -- simplify armel/armhf specific options
  * enforcer -- fix incorrectly specified flavour matches
  * [Config] Disable IRQ_REMAP
  * [Config] Enable CONFIG_SENSORS_LM95245=m
  * [Config] Enable CONFIG_SENSORS_MAX1668=m
  * [Config] Enable CONFIG_SENSORS_NTC_THERMISTOR=m
  * [Config] Enable CONFIG_SENSORS_MAX6639=m
  * [Config] Enable CONFIG_SENSORS_MAX6642=m
  * [Config] Enable CONFIG_SENSORS_LINEAGE=m
  * [Config] Enable CONFIG_CRYPTO_SALSA20=m
  * [Config] Enable CONFIG_PATA_TOSHIBA=m
  * [Config] Enable CONFIG_POHMELFS=m
  * [Config] Enable CONFIG_NET_PACKET_ENGINE=y
  * [Config] Enable CONFIG_PATA_OPTI=m
  * add overlayfs to virtual inclusion list
    - LP: #903897
  * add veth to virtual inclusion list
    - LP: #903897
  * SAUCE: resolve WARNING: at drivers/block/floppy.c:2929 do_fd_request
  * [Config] DEFAULT_MMAP_MIN_ADDR=32k on arm
    - LP: #903346
  * [Config] CONFIG_LOCKUP_DETECTOR=y
    - LP: #903615
  * rebase to upstream 55b02d2f

Date: Mon, 16 Jan 2012 17:27:01 +0100
Changed-By: Paolo Pisati <paolo.pisati at canonical.com>
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Signed-By: Tim Gardner <tim.gardner at canonical.com>
https://launchpad.net/ubuntu/precise/+source/linux-ti-omap4/3.2.0-1404.6
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA512

Format: 1.8
Date: Mon, 16 Jan 2012 17:27:01 +0100
Source: linux-ti-omap4
Binary: linux-headers-3.2.0-1404 linux-ti-omap4-tools-3.2.0-1404 linux-image-3.2.0-1404-omap4 linux-headers-3.2.0-1404-omap4 linux-image-3.2.0-1404-omap4-dbgsym
Architecture: source
Version: 3.2.0-1404.6
Distribution: precise
Urgency: low
Maintainer: Ubuntu Kernel Team <kernel-team at lists.ubuntu.com>
Changed-By: Paolo Pisati <paolo.pisati at canonical.com>
Description: 
 linux-headers-3.2.0-1404 - Header files related to Linux kernel version 3.2.0
 linux-headers-3.2.0-1404-omap4 - Linux kernel headers for version 3.2.0 on TI OMAP4-based systems
 linux-image-3.2.0-1404-omap4 - Linux kernel image for version 3.2.0 on TI OMAP4-based systems
 linux-image-3.2.0-1404-omap4-dbgsym - Linux kernel debug image for version 3.2.0 on TI OMAP4-based syst
 linux-ti-omap4-tools-3.2.0-1404 - Linux kernel tools for version 3.2.0-1404
Launchpad-Bugs-Fixed: 621195 684666 776542 861296 885744 903346 903615 903897 906832 912197 912199 912308
Changes: 
 linux-ti-omap4 (3.2.0-1404.6) precise; urgency=low
 .
   [ Paolo Pisati ]
 .
   * SAUCE: fix <mach/omap4-common.h> -> "common.h" conversion
   * [Config] updateconfigs after rebase
   * rebased on Ubuntu-3.2.0-9.16
   * [Config] s/CONFIG_PREEMPT_VOLUNTARY=y/CONFIG_PREEMPT=y/
   * Tilt-tracking @ c39eb9613ca29beae72b89dbdbadc878a30c4c70
 .
   [ Ubuntu: 3.2.0-9.16 ]
 .
   * [Config] Enable numerous CONFIG_VIDEO_* cards on ARM
   * [Config] pull ARM sound modules =m
   * [Config] CONFIG_RTC_DRV_TEST is for testing only
   * [Config] CONFIG_USB_DUMMY_HCD is testing only
   * [Config] CONFIG_USB_FILE_STORAGE is deprecated
   * Revert "[Config] Temporarily disable CONFIG_CAN_TI_HECC on armel"
   * [Config] Enable CONFIG_HW_RANDOM_PASEMI=m
   * [Config] Enable CONFIG_MMC_TMIO=m
   * [Config] Enable CONFIG_MTD_NAND_FSL_ELBC=m
   * [Config] Enable CONFIG_ISI=m
   * [Config] Enable CONFIG_MMC=y
   * [Config] Enable CONFIG_LIRC_PARALLEL=m
   * [Config] Enable CONFIG_MAC_EMUMOUSEBTN=m
   * [Config] Enable CONFIG_CHR_DEV_SG=y
   * [Config] Enable CONFIG_GPIO_PCA953X=m
   * [Config] Enable CONFIG_GPIO_TWL4030=m
   * [Config] Enable CONFIG_INET_DIAG=m
   * [Config] Enable CONFIG_NLS_ISO8859_1=m
   * [Config] Enable CONFIG_NVRAM=m
   * [Config] Enable CONFIG_SLIP=m
   * [Config] Enable CONFIG_PC300TOO=m
   * [Config] Enable CONFIG_TUN=y
   * [Config] Enable CONFIG_NET_CLS_CGROUP=m
   * [Config] Enable CONFIG_THERMAL=y
   * [Config] Enable CONFIG_PPP=y
   * [Config] Enable CONFIG_PCI_STUB=m
   * Rebase to v3.2.1
   * [Config] Enable CONFIG_RTL8192E=m
   * [Config] Enable CONFIG_RTS5139=m
   * [Config] Make CONFIG_VIRTIO_(NET|BLK)=y
   * ARM: restart: add restart hook to machine_desc record
   * ARM: restart: allow platforms more flexibility specifying restart mode
   * ARM: restart: move reboot failure handing into machine_restart()
   * ARM: restart: remove argument to setup_mm_for_reboot()
   * ARM: 7159/1: OMAP: Introduce local common.h files
   * ARM: restart: only perform setup for restart when soft-restarting
   * ARM: 7189/1: OMAP3: Fix build break in cpuidle34xx.c because of irq
     function
   * ARM: idmap: populate identity map pgd at init time using .init.text
   * ARM: suspend: use idmap_pgd instead of suspend_pgd
   * ARM: proc-*.S: place cpu_reset functions into .idmap.text section
   * ARM: idmap: use idmap_pgd when setting up mm for reboot
   * ARM: head.S: only include __turn_mmu_on in the initial identity mapping
   * ARM: SMP: use idmap_pgd for mapping MMU enable during secondary booting
   * ARM: 7194/1: OMAP: Fix build after a merge between v3.2-rc4 and ARM
     restart changes
   * ARM: lib: add call_with_stack function for safely changing stack
   * ARM: reset: implement soft_restart for jumping to a physical address
   * ARM: stop: execute platform callback from cpu_stop code
   * ARM: kexec: use soft_restart for branching to the reboot buffer
   * ARM: restart: omap: use new restart hook
   * topdown mmap support
     - LP: #861296
   * Rebase to v3.2.1
 .
   [ Ubuntu: 3.2.0-8.15 ]
 .
   * [Config] Disable CONFIG_ACPI_PROCFS
   * Remove server from getabis
   * Temporarily disable module check
   * [Config] Disable CONFIG_MTD_TESTS
   * [Config] Disable CONFIG_X86_E_POWERSAVER
   * [Config] Set CONFIG_ARCNET=m
   * [Config] Enable CONFIG_ATM_DUMMY=m
   * [Config] Enable CONFIG_BLK_DEV_MD=y
   * ubuntu: fsam7400 select CHECK_SIGNATURE and depend on X86
   * [Config] Enable CONFIG_BLK_DEV_SD=y
   * [Config] Enable CONFIG_BLK_DEV_SR=y
   * [Config] Enable CONFIG_BLK_DEV_UB=m
   * [Config] Enable CONFIG_COPS=m
   * [Config] Enable CONFIG_DVB_USB_EC168=m
   * [Config] Enable CONFIG_ENC28J60=m
   * [Config] Enable CONFIG_FB_UVESA=m
   * [Config] Enable CONFIG_FB_ATY=m
   * [Config] Enable CONFIG_BROADCOM_PHY=y
   * [Config] Enable CONFIG_CICADA_PHY=y
   * [Config] Enable CONFIG_DAVICOM_PHY=y
   * [Config] Enable CONFIG_ICPLUS_PHY=y
   * [Config] Enable CONFIG_LSI_ET1011C_PHY=y
   * [Config] Enable CONFIG_LXT_PHY=y
   * [Config] Enable CONFIG_MARVELL_PHY=y
   * [Config] Enable CONFIG_NATIONAL_PHY=y
   * [Config] Enable CONFIG_QSEMI_PHY=y
   * [Config] Enable CONFIG_SMSC_PHY=y
   * [Config] Enable CONFIG_VITESSE_PHY=y
   * Add 3w-sas to scsi-modules
     - LP: #776542
   * SAUCE: ipv6: make the net.ipv6.conf.all.use_tempaddr sysctl propagate
     to interface settings
   * Revert "SAUCE: omap3: beagle: if rev unknown, assume xM revision C"
     - LP: #912199
   * Revert "SAUCE: omap3: beagle: detect new xM revision B"
     - LP: #912199
   * Revert "SAUCE: omap3: beaglexm: fix DVI initialization"
     - LP: #912199
   * Bluetooth: Add support for BCM20702A0 [0a5c:21e3]
     - LP: #906832
 .
   [ Ubuntu: 3.2.0-8.14 ]
 .
   * [Config] enable CONFIG_SND_USB_6FIRE
     - LP: #912197
   * rebase to mainline v3.2 final release
   * updateconfigs following rebase to v3.2 final
   * ubuntu: AUFS -- add BOM and automated update script
   * ubuntu: AUFS -- include the aufs_types.h file in linux-libc-headers
     - LP: #684666
   * ubuntu: AUFS -- update aufs-update to track new locations of headers
   * ubuntu: AUFS -- clean up the aufs updater and BOM
   * ubuntu: AUFS -- documentation on updating aufs2
   * ubuntu: AUFS -- aufs3-base.patch
   * ubuntu: AUFS -- aufs3-standalone.patch
   * ubuntu: AUFS -- fix undefined __devcgroup_inode_permission
   * ubuntu: AUFS -- fix undefined security_path_link
   * ubuntu: AUFS -- update to 4cf5db36bcd9748e8e7270022f295f84d1fc2245
   * ubuntu: AUFS -- updateconfigs following update
   * ubuntu: AUFS -- suppress benign plink warning messages
     - LP: #621195
   * ubuntu: AUFS -- enable in config and makefile
   * ubuntu: AUFS -- disable in favor of overlayfs
   * [Config] linux-virtual -- should include the extX modules
     - LP: #912308
   * SAUCE: eCryptfs: Improve statfs reporting
     - LP: #885744
   * rebase to upstream v3.2
 .
   [ Ubuntu: 3.2.0-7.13 ]
 .
   * rebase to upstream 3.2-rc7
 .
   [ Ubuntu: 3.2.0-6.12 ]
 .
   * rebase to upstream v3.2-rc6
 .
   [ Ubuntu: 3.2.0-5.11 ]
 .
   * enforcer -- allow arch and flavour predicates to take lists
   * enforcer -- simplify armel/armhf specific options
   * enforcer -- fix incorrectly specified flavour matches
   * [Config] Disable IRQ_REMAP
   * [Config] Enable CONFIG_SENSORS_LM95245=m
   * [Config] Enable CONFIG_SENSORS_MAX1668=m
   * [Config] Enable CONFIG_SENSORS_NTC_THERMISTOR=m
   * [Config] Enable CONFIG_SENSORS_MAX6639=m
   * [Config] Enable CONFIG_SENSORS_MAX6642=m
   * [Config] Enable CONFIG_SENSORS_LINEAGE=m
   * [Config] Enable CONFIG_CRYPTO_SALSA20=m
   * [Config] Enable CONFIG_PATA_TOSHIBA=m
   * [Config] Enable CONFIG_POHMELFS=m
   * [Config] Enable CONFIG_NET_PACKET_ENGINE=y
   * [Config] Enable CONFIG_PATA_OPTI=m
   * add overlayfs to virtual inclusion list
     - LP: #903897
   * add veth to virtual inclusion list
     - LP: #903897
   * SAUCE: resolve WARNING: at drivers/block/floppy.c:2929 do_fd_request
   * [Config] DEFAULT_MMAP_MIN_ADDR=32k on arm
     - LP: #903346
   * [Config] CONFIG_LOCKUP_DETECTOR=y
     - LP: #903615
   * rebase to upstream 55b02d2f
Checksums-Sha1: 
 589719a4ece5e0a537664b0b641c9e5d3fd1c4e2 2213 linux-ti-omap4_3.2.0-1404.6.dsc
 ba33f1d72dd526db7ac1d8d76ae5d5a5d19aae61 105085710 linux-ti-omap4_3.2.0-1404.6.tar.gz
Checksums-Sha256: 
 d8db53431967810b9e80d5566a2195492d9b6e1f7d4e2a9de8634c343a13dcd0 2213 linux-ti-omap4_3.2.0-1404.6.dsc
 0b373c3e74365070186263645a7244db73509594d8eea8a32b5b80beb8749ddf 105085710 linux-ti-omap4_3.2.0-1404.6.tar.gz
Files: 
 55ca23be0bfdc0d5859623e0a0645950 2213 devel optional linux-ti-omap4_3.2.0-1404.6.dsc
 577ebcc19b774e35a18bb8532e61c996 105085710 devel optional linux-ti-omap4_3.2.0-1404.6.tar.gz

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)

iQIcBAEBCgAGBQJPGBWsAAoJED12yEX6FEfKs2gP/j2iimf/AYryM7sBNJYxf8dM
N1pu08Ut46y5djgmi5x+y7zyhZgNl91Ny3bvHY7mfcfwsJomZAcO85jY+xP6S2Ck
mHAAlqzFlVqRAw6OvM65dB7eSqkUdaxsEzAIqzJdOSc05MwDCIcUKNNLEpMvB9ON
JxmVE8nv2J5maygde4OhGd9dtIUNtuZPTiN/ArmultEvs2GTGqrNp4H0ZVQNMGzZ
+sV5YJRrWnLiseNcr+9YmyX69egCky+XnYeyfV/jcTZ7Dc/Yh6xr9Wtk/yOtQfrR
2iKeBwDaDeqzGJ12cSJiPnG2XH4nMjRYWRhw0PWL5lOYxuvn+zEMZVlG1An2QSWK
natSd3fpZJMxV/JfgGlMK0KXaEdj5kEpExsdDCHQl9qVtXDXjlsaJ2+XUcoMPqDZ
b2fUKmhaDWKYQZw4+JdEJlHOUluj15uIKaJ8aWx6W7Xegd4XJ7TYuxXvQOYZ0Puc
bNGtHvuj/6KOOGfW9m81Z7BasRDgBlyxJ+jdCmUgPvFy2BmoPF+vVYwj/CzCZfNw
O8DjoSeLXXSGocNkBsGzOnUfk9tM0gtd3syjUBYS9zzPUVxmME0fi0gYEWgE8cNQ
hJ17YkP92xCvKsMUNCrvgjCOf+PWnrAOh1lt7Qejqlwcz58EyQMRdO/wzWwkMfok
G33Er/tJj/rMug4sMCTh
=QyuK
-----END PGP SIGNATURE-----


More information about the Precise-changes mailing list