[ubuntu/oneiric] u-boot-linaro 2011.09.6-0ubuntu1 (Accepted)

[John Rigby]

u-boot-linaro (2011.09.6-0ubuntu1) oneiric; urgency=low

  * omap4: reduce default operating point for 4460 devices
    Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
    (LP: #867670)
      From bug report:
        With both A9 cores loaded 4460 reaches max temperature in about 30s at the
        current operating point of 930MHz. The operating point should be lowered to
        700MHz.
        It appears the panda heats more than I thought (and much more that the blaze),
        and by loading the 2 cores I can quite easily reach max temperature at 920MHz
        (it takes around 30s on my board!).
        At 700MHz, the temperature still increases but much slower. So if the A9 cores
        do not run at 100% all the time we shall be ok.
        So for now, we definitely need this change if we don't want to run with a
        heatsink...
  * mmc: omap: enable high capacity
      Enable high capacity to host capability.
      Fixes eMMC detection on boot from MMC/SD card.
    mmc: omap: config VMMC, MMC1_PBIAS
      Config VMMC voltage to 3V for MMC/SD card slot
      and PBIAS settings needed for OMAP4
    (LP: #867650)

Date: Wed, 05 Oct 2011 17:17:34 -0600
Changed-By: John Rigby <john.rigby at linaro.org>
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/oneiric/+source/u-boot-linaro/2011.09.6-0ubuntu1
-------------- next part --------------
Format: 1.8
Date: Wed, 05 Oct 2011 17:17:34 -0600
Source: u-boot-linaro
Binary: u-boot-linaro-ca9x4-ct-vxp u-boot-linaro-efikamx u-boot-linaro-highbank u-boot-linaro-igep0020 u-boot-linaro-mx51evk u-boot-linaro-mx53loco u-boot-linaro-omap3-beagle u-boot-linaro-omap3-overo u-boot-linaro-omap4-panda u-boot-linaro-omap4-sdp4430
Architecture: source
Version: 2011.09.6-0ubuntu1
Distribution: oneiric
Urgency: low
Maintainer: Ubuntu Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: John Rigby <john.rigby at linaro.org>
Description: 
 u-boot-linaro-ca9x4-ct-vxp - U-Boot bootloader binary for the ARM ca9x4_ct_vxp (Versatile Expr
 u-boot-linaro-efikamx - U-Boot bootloader binary for the Genesi i.MX515 Efika MX
 u-boot-linaro-highbank - U-Boot bootloader binary for the Calxeda Highbank
 u-boot-linaro-igep0020 - U-Boot bootloader binary for the ISEE igep0020 (IGEPv2) board
 u-boot-linaro-mx51evk - U-Boot bootloader binary for the Freescale i.MX51 mx51evk (Babbag
 u-boot-linaro-mx53loco - U-Boot bootloader binary for the Freescale i.MX53 mx53loco (Babba
 u-boot-linaro-omap3-beagle - U-Boot bootloader binary for various TI OMAP3 Beagle boards
 u-boot-linaro-omap3-overo - U-Boot bootloader binary for Gumstix Overo boards
 u-boot-linaro-omap4-panda - U-Boot bootloader binary for the TI OMAP4 Panda board
 u-boot-linaro-omap4-sdp4430 - U-Boot bootloader binary for the TI OMAP4 SDP4430 board
Launchpad-Bugs-Fixed: 867650 867670
Changes: 
 u-boot-linaro (2011.09.6-0ubuntu1) oneiric; urgency=low
 .
   * omap4: reduce default operating point for 4460 devices
     Reduce the operating point for 4460 to OPP100 (MPU at 700MHz)
     (LP: #867670)
       From bug report:
         With both A9 cores loaded 4460 reaches max temperature in about 30s at the
         current operating point of 930MHz. The operating point should be lowered to
         700MHz.
         It appears the panda heats more than I thought (and much more that the blaze),
         and by loading the 2 cores I can quite easily reach max temperature at 920MHz
         (it takes around 30s on my board!).
         At 700MHz, the temperature still increases but much slower. So if the A9 cores
         do not run at 100% all the time we shall be ok.
         So for now, we definitely need this change if we don't want to run with a
         heatsink...
   * mmc: omap: enable high capacity
       Enable high capacity to host capability.
       Fixes eMMC detection on boot from MMC/SD card.
     mmc: omap: config VMMC, MMC1_PBIAS
       Config VMMC voltage to 3V for MMC/SD card slot
       and PBIAS settings needed for OMAP4
     (LP: #867650)
Checksums-Sha1: 
 08ad3969ff086d501461b9f2f62bc538a45d52f4 1497 u-boot-linaro_2011.09.6-0ubuntu1.dsc
 82f3798a48b3bc18c6f1d41095c218fb71ada374 11061230 u-boot-linaro_2011.09.6.orig.tar.gz
 0f3b5bb3b916bca67a56fdf94d83ee01cb15b14d 9441 u-boot-linaro_2011.09.6-0ubuntu1.debian.tar.gz
Checksums-Sha256: 
 4ec11d50b4ff89d0086fa785011f1e53eb7558893570c4cef0da165d47b0f0d3 1497 u-boot-linaro_2011.09.6-0ubuntu1.dsc
 6f4e23496eed81b25baa57e0506aa1f8ecf97f30ab08c2ebcef8904dc270b279 11061230 u-boot-linaro_2011.09.6.orig.tar.gz
 c90c14970d3643a61223354796b387a625cf815849aa53bf6018cb0aedc87990 9441 u-boot-linaro_2011.09.6-0ubuntu1.debian.tar.gz
Files: 
 5b44a09913d15a8caea404895c47817d 1497 misc extra u-boot-linaro_2011.09.6-0ubuntu1.dsc
 774707466a4b50e322ec014bd0cc5844 11061230 misc extra u-boot-linaro_2011.09.6.orig.tar.gz
 a7ea845b0411d3469eb063b97019a620 9441 misc extra u-boot-linaro_2011.09.6-0ubuntu1.debian.tar.gz
Original-Maintainer: John Rigby <john.rigby at linaro.org>