[ubuntu/oneiric] system-config-printer 1.3.5+20110731-0ubuntu1 (Accepted)
Till Kamppeter
till.kamppeter at gmail.com
Sun Jul 31 12:15:20 UTC 2011
system-config-printer (1.3.5+20110731-0ubuntu1) oneiric; urgency=low
* New upstream release
o GIT 1.3.x snapshot from 31 July 2011
o State of 1.3.5 + 1 additional fix
o D-Bus service for access to the algorithmic parts of s-c-p:
- Now all parts which are useful fo all kinds of printer setup tools
(especially the new tool in GNOME) are exposed via D-Bus: Driver
selection, missing executables checking, and physical device grouping
(https://blueprints.launchpad.net/ubuntu/+spec/desktop-o-system-config-printer-vs-gnome-3-control-center)
o udev/Plug'n'Print:
- Don't rely on retriggering printers; enumerate them from systemd
instead.
- Don't complain about missing/invalid device ID for devices we've
already handled.
o UI:
- Removed unused Printer Groups feature.
- Don't show "No printers configured" page if the printers are filtered
in any way.
- URL-quote URIs when using "Find Network Printer" (LP: #808137).
- Downloadable drivers: don't display printers for which there are no
drivers (Red Hat bug #668154).
- Kerberos support for the SMB 'Verify' button (requires new enough
pycups).
- Removed IPP/HTTP device screen in favour of "Enter URI" (Red Hat bug
#685091).
- Converted ComboBoxEntry widgets to Entry+EntryCompletion in
NewPrinterWindow.ui.
- Robustness in ppdsloader in the face of errors (LP: #766818).
- Changed Make/Model/State labels into GtkEntry widgets so contents are
always fully selectable (Red Hat bug #719217).
- Convert iters to paths before comparing (Red Hat bug #717062, LP:
#791690, upstream bug #221).
- Set translation domain in D-Bus service (LP: #783967).
- Ensure consistency in jobviewer if add_job fails (Red Hat bug #693055,
Red Hat bug #632551).
o Driver preferences:
- Avoid PostScript for HP LaserJet 2100 Series (Red Hat bug #710231).
- Raised priority for SpliX driver (LP: #793741).
o Other:
- Fixed cupsFilter search in missing executables check.
- Use PackageKit to resolve missing executable filenames to packages,
instead of having a static mapping in the source code.
- Fixed DNSSD hostname resolution.
- Fixed LPD probing (Red Hat #726383).
- Use "hostname" instead of "IP address" when asking for names of browse
servers (Red Hat bug #726134).
- Updated translations.
- Updated Free Software Foundation (FSF) address.
- Adjusted test code in asyncpk1.py so it doesn't look like a tempfile
vulnerability.
* debian/system-config-printer-common.install,
debian/system-config-printer-gnome.install: Updated for removed files.
Date: Sun, 31 Jul 2011 13:06:22 +0200
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
https://launchpad.net/ubuntu/oneiric/+source/system-config-printer/1.3.5+20110731-0ubuntu1
-------------- next part --------------
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Format: 1.8
Date: Sun, 31 Jul 2011 13:06:22 +0200
Source: system-config-printer
Binary: system-config-printer-common system-config-printer-udev system-config-printer-gnome python-cupshelpers
Architecture: source
Version: 1.3.5+20110731-0ubuntu1
Distribution: oneiric
Urgency: low
Maintainer: Ubuntu Core Developers <ubuntu-devel-discuss at lists.ubuntu.com>
Changed-By: Till Kamppeter <till.kamppeter at gmail.com>
Description:
python-cupshelpers - Python modules for printer configuration with CUPS
system-config-printer-common - Printer configuration GUI
system-config-printer-gnome - Printer configuration GUI
system-config-printer-udev - Printer auto-configuration facility based on udev
Launchpad-Bugs-Fixed: 766818 783967 791690 793741 808137
Changes:
system-config-printer (1.3.5+20110731-0ubuntu1) oneiric; urgency=low
.
* New upstream release
o GIT 1.3.x snapshot from 31 July 2011
o State of 1.3.5 + 1 additional fix
o D-Bus service for access to the algorithmic parts of s-c-p:
- Now all parts which are useful fo all kinds of printer setup tools
(especially the new tool in GNOME) are exposed via D-Bus: Driver
selection, missing executables checking, and physical device grouping
(https://blueprints.launchpad.net/ubuntu/+spec/desktop-o-system-config-printer-vs-gnome-3-control-center)
o udev/Plug'n'Print:
- Don't rely on retriggering printers; enumerate them from systemd
instead.
- Don't complain about missing/invalid device ID for devices we've
already handled.
o UI:
- Removed unused Printer Groups feature.
- Don't show "No printers configured" page if the printers are filtered
in any way.
- URL-quote URIs when using "Find Network Printer" (LP: #808137).
- Downloadable drivers: don't display printers for which there are no
drivers (Red Hat bug #668154).
- Kerberos support for the SMB 'Verify' button (requires new enough
pycups).
- Removed IPP/HTTP device screen in favour of "Enter URI" (Red Hat bug
#685091).
- Converted ComboBoxEntry widgets to Entry+EntryCompletion in
NewPrinterWindow.ui.
- Robustness in ppdsloader in the face of errors (LP: #766818).
- Changed Make/Model/State labels into GtkEntry widgets so contents are
always fully selectable (Red Hat bug #719217).
- Convert iters to paths before comparing (Red Hat bug #717062, LP:
#791690, upstream bug #221).
- Set translation domain in D-Bus service (LP: #783967).
- Ensure consistency in jobviewer if add_job fails (Red Hat bug #693055,
Red Hat bug #632551).
o Driver preferences:
- Avoid PostScript for HP LaserJet 2100 Series (Red Hat bug #710231).
- Raised priority for SpliX driver (LP: #793741).
o Other:
- Fixed cupsFilter search in missing executables check.
- Use PackageKit to resolve missing executable filenames to packages,
instead of having a static mapping in the source code.
- Fixed DNSSD hostname resolution.
- Fixed LPD probing (Red Hat #726383).
- Use "hostname" instead of "IP address" when asking for names of browse
servers (Red Hat bug #726134).
- Updated translations.
- Updated Free Software Foundation (FSF) address.
- Adjusted test code in asyncpk1.py so it doesn't look like a tempfile
vulnerability.
* debian/system-config-printer-common.install,
debian/system-config-printer-gnome.install: Updated for removed files.
Checksums-Sha1:
eb5c303034be4ecaee3d396ffbef360b3fea37cf 1506 system-config-printer_1.3.5+20110731-0ubuntu1.dsc
40f0fa56a4e2246f934617e7585eae32e685eb81 2019878 system-config-printer_1.3.5+20110731.orig.tar.gz
b82986f30f2249f66e38a41486c280f52e8399d3 141655 system-config-printer_1.3.5+20110731-0ubuntu1.diff.gz
Checksums-Sha256:
e0fc214dbd24a54b087f7280e6e6152c6b623b1c98572f1a5873848cb29f6df2 1506 system-config-printer_1.3.5+20110731-0ubuntu1.dsc
367aa4bfb0cc823dee60e524c62705bea376010092e371cb9f1a8aef860cb310 2019878 system-config-printer_1.3.5+20110731.orig.tar.gz
6d782f9de468f8f14cde33eafff85213939b094b091459a24c8e4620873a2a33 141655 system-config-printer_1.3.5+20110731-0ubuntu1.diff.gz
Files:
e6381ba0eca470dcd12e8370d594dda6 1506 gnome optional system-config-printer_1.3.5+20110731-0ubuntu1.dsc
a0d98ce7ac110763f58165dbe3f5695c 2019878 gnome optional system-config-printer_1.3.5+20110731.orig.tar.gz
790864792acb7c5513ea0e7d6398ca8d 141655 gnome optional system-config-printer_1.3.5+20110731-0ubuntu1.diff.gz
Original-Maintainer: Otavio Salvador <otavio at ossystems.com.br>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.11 (GNU/Linux)
iEYEARECAAYFAk41RwcACgkQTuVatl/cKEkRtwCfVVd4i415GfP4Dyi22+kednSE
wwQAoM6Fzd0S+OI/jcxEXUGwgzT4Sjo+
=t1Qp
-----END PGP SIGNATURE-----
More information about the Oneiric-changes
mailing list